Airfrex AIU2 Bluetooth Receiver
What’ s inside the box
- Bluetooth Receiver x 1
- USB charging cable x 1
- Quick Start Guide x 1
How to Operate This Device
Power on this Bluetooth receiver
- Single press the button
- The Bluetooth LED indicator blinks Bluetooth and red
- It is ready to be paired
Pairing You Mobile Device
- Turn on the Bluetooth functionality on your mobile devices, mobile phone / iPad.
- Search and select ” AF Loss less ” in your mobile device
- Press AF Lossless icon in your mobile device to pair our Bluetooth receiver.
- When device has connected to the Bluetooth receiver, the LED turns to solid blue.
Optional Bass Boost Feature
To Activate or deactivate the bass boost, please double click the button during music playing.
Charging
- Plug the small end of the USB cable into the USB charging port of the adapter.
- Plug the other end into a USB wall charger or computer that is powered on.
- Normally it takes around 3 seconds for the LED indicator to turn on.
- During charging, the LED indicator will be in solid red.
- It takes around 2 hour for a full charge.
- 0nce it is fully charged, the LED indicator will be off.
Very Important Notes
This is a Bluetooth Receiver not Transmitter
Airfrex Bluetooth Receiver does not work with any Bluetooth headphone or Bluetooth Speaker because this a Bluetooth receiver not a Bluetooth Transmitter. If you need a Bluetooth adapter to work with your Bluetooth headphones or Bluetooth speakers, you need a Bluetooth Transmitter, please go and search ” Airfrex Bluetooth Transmitter ” or visit our website at www.airfrex.com
This Receiver Supports Using while Charging
Trouble Shooting:
- Can not Turn on—-Need to charge
- Can not Charge—-Change a new charging cable/ charger
- Can not Pair——-On your device, turn on and off the Bluetooth functionality, then remove “AF Lossless ” from the Bluetooth list on your mobile device, then repeat the above “Paring your mobile device”
- Not Work with Headphone—-Check if this model is compatible with you headphone.
- Sound Cutting in and out—-Make sure your device is within a distance of33 feet
- No Sound/ Only One Side Has Sound/ Terrible Sound—-Probably defected, please contact us for help via email at support@airfrex.com
Specifications
- Casing Material : Aluminum and Plastic
- Finish : Matt
- THD : <0.05%
- Amplifier : Texas Instrument TPA6132A2
- Channels: 2.0
- Audio Jack: 3.5mm/2.5mm
- Microphone: Built-In / Hands Free
- Frequency Response: 20Hz- 20kHz
- Battery Capacity: 110 mAH/ 3.7V
- Battery Charging Time: 2 Hours
- Play Time: Up to 6 Hours
- Bluetooth Signal Distance: Up to 33 Feet
Airfrex shall not be held liable for any technical or user interface discrepancies in this manual. The Airfrex owner’ s manual may be subject to change without prior notice. Check out www.airfrex.com/support for the latest version of the Airfrex owner’ s manual.
Single press the button to turn on the device, the LED indicator will be flashing blue and red ( ready to be paired ).
Search and select” AF Lossless” on your Bluetooth device
NOTES ON ENVIRONMENTAL PROTECTION
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment.
For more information on disposal and recycling of this product, contact your local municipality, disposal service or the shop where you bought this product.
Airfrex hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and all other applicable EU directive ‘requirements. The complete declaration of conformity can be found at: www.airfrex.com/support
FCC ID: 2A6SV-AF03
FCC
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC and Industry Canada RF radiation exposure limits set forth for general population. It must not be co-located or be operating in conjunction with any other antenna or transmitter. This Class B digital apparatus complies with Canadian ICES-003.
This device complies with part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- Product Name: Bluetooth Receiver
- Model NO. : AIU2
- Manufacturer: Forient Technology Co., Limited
- ADD: 2nd Floor, NO.904071 Liangang Road, Baijiao Development Zone Doumen, Zhuhai City, Guangdong, 519120 China
All rights reserve. Airfrex and the Airfrex logo are trademarks of Forient Technology Co., Limited. No part of this publication may be reproduced, stored or transmitted in any form without the permission Forient Technology Co., Limited. While every effort has been made ensure the contents are accurate at the time of publication, features and specification may be subject to change without prior notice.
If you require service or any technical support, please visit our website at www.airfrex.com/support for assistance or contact us via email at support@airfrex.com
Designed and Manufactured by: Forient Technology Co., Limited
- Address: 2nd Floor, #904071 Liangang Road, Baijiao Development Zone, Doumen, Zhuhai City, Guangdong Province, 519120 China
- Tel: +86 13417902871
Airfrex Lossless Series Bluetooth Adapters ( Receivers and Transmitter )
Documents / Resources
 |
Airfrex AIU2 Bluetooth Receiver [pdf] User Guide AIU2, AIU2 Bluetooth Receiver, Bluetooth Receiver, Receiver |