Agilicus 2AVKP-BF-BK04 PTZ Security Camera User Guide
Product Diagram
| Reset Button | Keep pressing for 5 seconds o reset |
| Blink Slowly in Red | Awaiting Wi-Fi connection, ready add devices |
| Blink Fast in Red | Wi-Fi connecting |
| Sold in Red | Network problem |
| Sold in Blue | Wi-Fi connected, camera running normally. |
| Blink Slowly in Blue | Firmware update |
Download and Install App
Download Cloud Edge App from Google Play™ or App Store™ Or scan the QR codes as below, with your smart phone.
NOTE: Google Play™ is a trademark of Google Inc. App Store™ is a service mark of Apple Inc.
NOTE: Please tum on both of the following permissions.
- Allow Cloud Edge App to access mobile cellar data and wireless LAN, otherwise it will fail to connect the camera.
- Allow Cloud Edge App o receive pushed messages, otherwise, the phone will not receive alarms when motion is detected.
Account Registration
New user needs to sign up Cloud Edge App with email address. Click ‘Sign up’ to create a New Account and follow the steps to complete registration.
Add Camera to App
Preparations for connection
- Insert a Micro SD Card into the camera to save video clips or you can start the 7-day free cloud service. Without Micro SD Card or cloud service, no video will be saved.
- Please select 2.4G/5G WiFi to ensure good signal.
- When connecting to the network, please take the camera close to the router
(Recommended within 10-15 ft).
Method 1: Bluetooth Setup(RECOMMENDED)
- On the Homepage, tap “Add” or “+” in the upper right corner, tap “Add Device”.
- If the Bluetooth of cellphone doesn’t turn on, the app will show a pop-up, please allow it to turn on Bluetooth.
- After Bluetooth turns on, the app will automatically search for devices that are on and not bound. Select the device you want to connect in the search list.
- To connect the camera, select either the 2.4GHz or 5GHz Wi-Fi and enter the password. The app will automatically display the Wi-Fi you may be using when Bluetooth is turned on. Usually, the name and password for both Wi-Fi networks are the same or similar. If you cannot find the Wi-Fi network, please contact your router provider to check your router’s Wi-Fi settings.
- The app will automatically go to the page where the wifi connection is in progress. A sound will be heard. Wait for connection successful and camera indicator light changes to steady blue. Click “Next” to edit the camera name and choose a family. Click “Done” to finish the setup.
- If failed to connect, check the reason and resolution shown on the app. Long press the reset button until hear a “cuckoo” sound to reset the camera and start again, or try the other methods below.
Method 2: QR Code setup
- Tap ‘Add Device’
- Select Camera
- Tum on the Camera
- Input Wi-Fi Password
- Prepare the Scanning
- Scan QR Code
- Installation complete at 100%
- Name the camera
- View Installation Tips
- Perform Network Diagnosis
- Using the camera
Prolinx GmbH
Brehmstr. 56, 40239 Duesseldorf
Germany
Email: eu@eulinx.eu
Prolinx Global LTD
27 Old Gloucester Street
London, WC1N 3AX, UK
Email: eu@eulinx.eu
Customers Support Email: svipcustomers@163.com
FCC ID: 2AVKP-BF-BK04
Documents / Resources
 |
Agilicus 2AVKP-BF-BK04 PTZ Security Camera [pdf] User Guide 2AVKP-BF-BK04 PTZ Security Camera, 2AVKP-BF-BK04, PTZ Security Camera, Security Camera, Camera |