The AC/DC Current Probe Model SL361 is designed for accurate
current measurements. It is compatible with various electrical
systems and features a voltage limiting circuit for safety.

Operation

The current probe is used to measure AC and DC currents in
electrical systems. Follow the precautions for use and ensure
proper calibration for accurate readings.

Maintenance

Regular maintenance includes cleaning the probe, replacing the
battery as needed, and recalibrating the instrument annually for
optimal performance.

Specifications

Reference Conditions

The probe operates under specified environmental conditions to
ensure accurate measurements.

Electrical Specifications

The probe complies with IEC 61010-2-032 standards for Type A
current sensors. It features double or reinforced insulation for
operator safety.

FAQ

Q: How often should I recalibrate the AC/DC Current Probe?

A: The recommended calibration interval is 12 months starting
from the date of receipt by the customer. For recalibration, please
use the manufacturer’s calibration services.

Q: What does the voltage limiting circuit symbol on the probe
indicate?

A: The voltage limiting circuit symbol signifies that the probe
is equipped with a circuit to limit voltage levels for safety
during measurements.

“`

View Fullscreen

User Manual ENGLISH
AC/DC Current Probe
Model SL361
CURRENT MEASUREMENT PROBES

Copyright© Chauvin Arnoux®, Inc. d.b.a. AEMC® Instruments. All rights reserved.
No part of this documentation may be reproduced in any form or by any means (including electronic storage and retrieval or translation into any other language) without prior agreement and written consent from Chauvin Arnoux®, Inc., as governed by United States and International copyright laws.
Chauvin Arnoux®, Inc. d.b.a. AEMC® Instruments 15 Faraday Drive · Dover, NH 03820 USA Phone: 603-749-6434 or 800-343-1391
This documentation is provided as is, without warranty of any kind, express, implied, or otherwise. Chauvin Arnoux®, Inc. has made every reasonable effort to ensure that this documentation is accurate; but does not warrant the accuracy or completeness of the text, graphics, or other information contained in this documentation. Chauvin Arnoux®, Inc. shall not be liable for any damages, special, indirect, incidental, or inconsequential; including (but not limited to) physical, emotional or monetary damages due to lost revenues or lost profits that may result from the use of this documentation, whether or not the user of the documentation has been advised of the possibility of such damages.

Statement of Compliance
Chauvin Arnoux®, Inc. d.b.a. AEMC® Instruments certifies that this instrument has been calibrated using standards and instruments traceable to international standards.
We guarantee that at the time of shipping your instrument has met the instrument’s published specifications.
An NIST traceable certificate may be requested at the time of purchase, or obtained by returning the instrument to our repair and calibration facility, for a nominal charge.
The recommended calibration interval for this instrument is 12 months and begins on the date of receipt by the customer. For recalibration, please use our calibration services. Refer to our repair and calibration section at www.aemc.com/calibration.

Serial #: Catalog #: Model #:

2153.09 SL361

Please fill in the appropriate date as indicated: Date Received: Date Calibration Due:

Chauvin Arnoux®, Inc. d.b.a AEMC® Instruments www.aemc.com

TABLE OF CONTENTS
1. INTRODUCTION………………………………………………………… 6
1.1 INTERNATIONAL ELECTRICAL SYMBOLS ……………………… 6 1.2 DEFINITION OF MEASUREMENT CATEGORIES…………….. 7 1.3 PRECAUTIONS FOR USE …………………………………………. 7 1.4 RECEIVING YOUR SHIPMENT………………………………………… 8 1.5 ORDERING INFORMATION …………………………………………….. 8
1.5.1 Accessories ……………………………………………………………… 8
2. PRODUCT FEATURES………………………………………………. 9
2.1 DESCRIPTION ………………………………………………………………… 9 2.2 COMPATIBILITY ……………………………………………………………… 9 2.3 FEATURES ……………………………………………………………………. 10
3. OPERATION ……………………………………………………………. 11
3.1 TURNING INSTRUMENT ON …………………………………………. 11 3.2 ZERO ADJUSTMENT…………………………………………………….. 11 3.3 MEASUREMENT …………………………………………………………… 12 3.4 AUTO OFF …………………………………………………………………….. 13 3.5 INSTRUMENT INDICATORS………………………………………….. 14 3.6 POWER ADAPTER (OPTIONAL) ……………………………………. 14
4. SPECIFICATIONS ……………………………………………………. 15
4.1 REFERENCE CONDITIONS …………………………………………… 15 4.2 ELECTRICAL SPECIFICATIONS ……………………………………. 15
4.2.1 Typical Curves ………………………………………………………… 16 4.2.2 Noise …………………………………………………………………….. 16 4.2.3 Zero Adjustment ……………………………………………………… 17 4.2.4 Frequency Response ………………………………………………. 17 4.2.5 Frequency Characteristics ……………………………………….. 19 4.3 VARIATIONS IN THE RANGE OF USE…………………………… 19 4.4 POWER SOURCES ……………………………………………………….. 20 4.5 ENVIRONMENTAL CONDITIONS ………………………………….. 20 4.6 MECHANICAL SPECIFICATIONS ………………………………….. 21 4.7 CONFORMITY TO INTERNATIONAL STANDARDS………… 21 4.8 ELECTROMAGNETIC COMPATIBILITY …………………………. 21

5. MAINTENANCE ……………………………………………………….22
5.1 CLEANING…………………………………………………………………….. 22 5.2 REPLACING THE BATTERY ………………………………………….. 23 5.3 REPAIR AND CALIBRATION …………………………………………. 24 5.4 TECHNICAL ASSISTANCE ……………………………………………. 24 5.5 LIMITED WARRANTY ……………………………………………………. 25
5.5.1 Warranty Repairs…………………………………………………….. 25

1. INTRODUCTION
Thank you for purchasing an AEMC® Instruments AC/DC Currrent Probe Model SL361. For the best results from your instrument and for your safety, you must read the enclosed operating instructions carefully and comply with the precautions for use. Only qualified and trained operators should use this product.
1.1 INTERNATIONAL ELECTRICAL SYMBOLS
Signifies that the instrument is protected by double or reinforced insulation.
CAUTION – Risk of Danger! Indicates a WARNING. Whenever this symbol is present, the operator must refer to the user manual before operation.
To identify the phase, or the direction, of the primary current.
Application or withdrawal authorized on conductors carrying dangerous voltages. Type A current sensor as per IEC 61010-2-032.
This symbol signifies a voltage limiting circuit.
Battery
USB socket
This symbol indicates Important information to acknowledge.
This product complies with the Low Voltage & Electromagnetic Compatibility European directives. In the European Union, this product is subject to a separate collection system for recycling electrical and electronic components in accordance with directive WEEE 2012/19/EU.
Chauvin Arnoux® and AEMC® Instruments have adopted an Eco-Design approach in order to design this instrument. Analysis of the complete lifecycle has enabled us to control and optimize the effects of the product on the environment. In particular this instrument exceeds regulation requirements with respect to recycling and reuse.

AC/DC Current Probe Model SL361 – User Manual

1.2 DEFINITION OF MEASUREMENT CATEGORIES
CAT IV: Corresponds to measurements performed at the primary electrical supply (< 1000 V). Example: primary overcurrent protection devices, ripple control units, and meters.
CAT III: Corresponds to measurements performed in the building installation at the distribution level. Example: hardwired equipment in fixed installation and circuit breakers.
CAT II: Corresponds to measurements performed on circuits directly connected to the electrical distribution system. Example: measurements on household appliances and portable tools.
1.3 PRECAUTIONS FOR USE
This device is compliant with safety standard IEC/EN 61010-2-032 or BS EN 61010-2-032, for voltages up to 600 V in CAT III or 300 V in CAT IV.
Failure to observe the safety instructions may result in electric shock, fire, explosion, and destruction of the instrument and of the installations.
The operator and/or the responsible authority must carefully read and clearly understand the various precautions to be taken in use. Sound knowledge and a keen awareness of electrical hazards are essential when using this instrument.
Use personal protection equipment (PPE) that meets or exceeds the environment in which the operator is working.
If you use this instrument other than as specified, the protection it provides may be compromised, thereby endangering you.
Do not use the instrument on networks of which the voltage or category exceeds those mentioned in this document.
Do not use the instrument if it seems to be damaged, incomplete, or poorly closed.
Before each use, check the condition of the insulation on the leads and housing. Any item of which the insulation is deteriorated (even partially) must be set aside for repair or scrapping.
When handling the instrument, keep your fingers behind the guard.
Do not expose the current probe to sprays of water.
All troubleshooting and metrological checks must be done by competent, accredited personnel.
Use ONLY a wall plug adapter rated 1 A.

AC/DC Current Probe Model SL361 – User Manual

1.4 RECEIVING YOUR SHIPMENT
Upon receiving your shipment, make sure that the contents are consistent with the packing list. Notify your distributor of any missing items. If the equipment appears to be damaged, file a claim immediately with the carrier and notify your distributor at once, giving a detailed description of any damage. Save the damaged packing container to substantiate your claim.
1.5 ORDERING INFORMATION
AC/DC Current Probe Model SL361 (10 Apeak, 100 mV/A & 100 Apeak, 10 mV/A, BNC) ………………………………………………… Cat. #2153.09 Includes (1) 9 V (6LR61) alkaline battery and a user manual.
1.5.1 Accessories
Adapter BNC (Female) to 4 mm Banana (Male) 600 V CAT III Replacement for Cat #2111.32 (Model SL361 only) …………………………………………………………………Cat. #2119.94
Cable 6 ft. USB Type A – Type B micro (Replacement for Models L452, 1110, 1227, 1246, 1510, 1821, 1822, 1823) and use with wall adapter for MR415 to MR527 series, SL306, & SL361 ……………………………………………………………………. Cat. #2138.66
Adapter Replacement US Wall Plug to USB for Models L452, 1510, MH60 {Accessory for Models 1110,1227, 1246, 1821,1822, 1823, MR415 to MR527 series, SL306, & SL361}…………………………………………………………. Cat. #2153.78
Order Accessories and Replacement Parts Directly Online Check our Storefront at www.aemc.com/store for availability

AC/DC Current Probe Model SL361 – User Manual

2. PRODUCT FEATURES
2.1 DESCRIPTION
The AC/DC Current Probe Model SL361 can be used to measure current from 100 mA to 100 Apeak without breaking the circuit in which it is flowing. It measures the waveform and amplitude of the current, in the form of a voltage. The bandwidth is from (DC to 100) kHz. The shape of the clamp enables it to access hard-to-reach places. It can be powered by a battery or 5 V via the mico-USB connector.
The instrument features: a reset push button, a range overload indicator, a power supply indicator, automatic standby to prolong battery life.
2.2 COMPATIBILITY
The Model SL361 is compatible with any analog or digital oscilloscope or other voltage-measuring instrument which has the following features: BNC input connector Range capable of displaying (0.2 to 0.5) V per division Minimum input impedance of >1 M Jaw opening can accommodate up to a single 4/0 AWG (11.684 mm diameter)
conductor.

AC/DC Current Probe Model SL361 – User Manual

2.3 FEATURES
Mobile Jaw

Fixed Jaw

Mobile Arm

Direction of Current Flow Indicator

Guard

600 V CAT III

Zero Adjustment / Reset Button

ON and OL Indicators
Zéro
Male BNC Connector

100 mV/A 10 mV/A
OFF

AUTO POWER OFF

Permanent Mode Indicator

Battery

Compartment

Cover

Battery

Compartment

Screw

Fixed Arm

Type B Micro-USB

Connector Three-position

Range Slide

Switch

WARNING: Always keep hand behind the guard.

AC/DC Current Probe Model SL361 – User Manual

3. OPERATION
3.1 TURNING INSTRUMENT ON
Switch the instrument ON by pushing the slide switch to the 10 mV/A or the 100 mV/A setting.
The 10 mV/A setting corresponds to the 100 A range.
The 100 mV/A setting corresponds to the 10 A range.
The ON indicator lights green. If it blinks, there is less than 4 hours of use. If it fails to light, you must replace the battery (see § 5.2), or plug into the USB power (optional) see § 3.6.
It takes 10 seconds to set up the instrument for use.
3.2 ZERO ADJUSTMENT
Switch the probe on. Connect the probe to the measuring instrument. The phase is on the core of
the BNC connector.
Make sure that the probe is not on a conductor and that its jaws are correctly closed.
Place the probe in the position it will be in during the measurement. Press the zero adjustment button. The OL indicator lights for approximately three seconds to indicate that the
zero adjustment is in progress in the two ranges.
If the zero has been correctly adjusted, the OL indicator goes off. If it remains on, the zero could not be adjusted.
In this case, check that the probe is not on any conductor and that its jaws are correctly closed, then press the zero adjustment button again.
Or switch the probe off and back on, and it is the last adjustment stored that will be used.

AC/DC Current Probe Model SL361 – User Manual

3.3 MEASUREMENT
NOTE: The zero must be adjusted before each measurement.

WARNING: Always connect the probe to the instrument before clamping onto the circuit under test.
Once the zero has been adjusted, press the mobile arm of the probe handle to open the jaws.
Clamp the cable carrying the current to be measured. The arrow on the probe must point in the presumed direction of current flow.

Load Source

Load

I
I
I

Release the mobile arm gently and make sure that the jaws are correctly closed.
The value measured is displayed on the measuring instrument. If the OL indicator lights, it means that the current is too strong to be measured. If you are in the 100 mV/A range, switch to the 10 mV/A range.

AC/DC Current Probe Model SL361 – User Manual

Apply the conversion factor corresponding to the setting of the switch.

NOTE: Remember to unclamp the probe from the conductor before disconnecting it from your meter or instrument.
3.4 AUTO OFF
At the end of 10 minutes of operation with no sign of the user’s presence (a press on the zero adjustment button or an action on the switch), the probe switches to standby and the ON indicator goes off.
To wake up the probe, press the zero adjustment button or set the switch to a position other than OFF.
To disable auto off (operation in permanent mode P ), press the zero adjustment button when starting up the instrument. The ON indicator blinks to indicate that the request has been taken into account, then lights steady orange when you release the zero adjustment button.
When the probe is switched off (switch set to OFF), the auto off function is re-activated.

AC/DC Current Probe Model SL361 – User Manual

3.5 INSTRUMENT INDICATORS

ON Indicator
Off: Instrument Off
Lighted green: Instrument On
Blinking green: The battery will have to be replaced in less than 4 h. Lighted orange: Permanent operation
P (auto off deactivated)

OL Indicator
Off: The measurement is correct.
Lighted red: The measurement exceeds the range.
Lighted red for 3 seconds: 3 s The zero adjustment is in
progress.

3.6 POWER ADAPTER (OPTIONAL)
For long-term measurements, you can connect the clamp to an external power source using the optional line power adapter. You can use any micro-USB adapter that supplies 5 VDC with a minimum 50 mA output or more.
When the instrument is powered via the micro-USB connector, automatic standby is disabled.
The insulation between the type B micro-USB connector and the measurement output is 600 V CAT III. This makes it possible to connect the clamp, without risk, to measuring instruments having inputs that are not insulated.

WARNING: The type B mico-USB connector must not be in contact with conductors or uninsulated parts at dangerous voltage.

AC/DC Current Probe Model SL361 – User Manual

4. SPECIFICATIONS

4.1 REFERENCE CONDITIONS

Quantity of influence Temperature Relative Humidity Position of the Conductor Frequency of the Measured Signal
Powered
External Electric Field External DC Magnetic Field (earth’s field) External AC Magnetic Field Impedance of the Measuring Instrument

Reference values
23 °C ± 5 °C (20 to 75) % RH
centered (DC to 65) Hz sine wave by battery: (6.5 to 9) V external supply: 5 V ± 0.1 V
zero < 40 A/m
zero 1 M and 100 pF

The intrinsic uncertainty is the error specified for the reference conditions. It is expressed as a percentage of the output signal (R) plus an offset in mV: ± (a % R + b)
4.2 ELECTRICAL SPECIFICATIONS

Range
Specified Measurement Range
Intrinsic Uncertainty
Phase Shift (DC to 65 Hz)

100 mV/A (10 A)

10 mV/A (100 A)

(0.1 to 10) Apeak

(0.5 to 40) Apeak

(40 to 100) Apeak

± (3 % R + 5 mV) ± (4 % R + 0.5 mV)

1.5 °

1 °

± 15 % R 1 °

AC/DC Current Probe Model SL361 – User Manual

4.2.1 Typical Curves

Typical amplitude error curve for a DC current, 10 mV/A range

Error (%)

12,00

10,00

8,00

6,00

4,00

2,00

0,00

-2,00

-4,00

-6,00

-8,00

-10,00

-12,00

-14,00

-16,00

-18,00

Maximum Envelope
Minimum Envelope
100 Current (ADC)

Typical amplitude error curve for a 60 Hz AC current, 10 mV/A range

Error (%)

18,00

16,00

14,00

12,00

10,00

8,00

6,00

4,00

2,00

0,00

-2,00

-4,00

-6,00

-8,00

-10,00

-12,00

-14,00

-16,00

-18,00

100 Current (AAC)

4.2.2 Noise
Typical Noise Level at Output 10 mV/A range 100 mV/A range

± 600 µVpeak to peak ± 5 mVpeak to peak

AC/DC Current Probe Model SL361 – User Manual

4.2.3 Zero Adjustment
Minimum zero adjustment range: ± 1 Adc in steps of approximately 0.9 mA.
4.2.4 Frequency Response
Typical amplitude error curve at 1 A versus frequency, 10 mV/A range
Error (dB)
0dB

-1dB

-2dB

-3dB

-4dB

-5dB
-6dB 10

Frequency

100

1000

10000

100000

1000000 (Hz)

Typical amplitude error curve at 1 A versus frequency, 100 mV/A range
Error (dB)
1dB

0dB

-1dB

-2dB

-3dB

-4dB

-5dB
-6dB 10

Frequency

100

1000

10000

100000

1000000 (Hz)

AC/DC Current Probe Model SL361 – User Manual

Typical phase shift error curve as a function of frequency, I = 1 A, 10 mV/A range
Phase Shift (°)
0,00

-20,00

-40,00

-60,00

-80,00

-100,00
-120,00 10

Frequency

100

1000

10000

100000 (Hz)

Typical phase shift error curve as a function of frequency, I = 1 A, 100 mV/A range
Phase Shift (°)
0,00

-20,00

-40,00

-60,00

-80,00

-100,00
-120,00 10

Frequency

100

1000

10000

100000

(Hz)

AC/DC Current Probe Model SL361 – User Manual

4.2.5 Frequency Characteristics

Range

10 mV/A 100 mV/A

Bandwidth to 3 dB down

(DC to 100) kHz

Rise time (10 to 90) % and fall time (90 to 10) %

3 µs

Response time to 10 %

1.8 µs

Insertion impedance at 10 kHz

2 m

Insertion impedance at 50 kHz

10 m

4.3 VARIATIONS IN THE RANGE OF USE

Quantity of Influence Range of Influence

Temperature

(-10 to + 50) °C

Relative Humidity Frequency Position of Conductor, 1 kHz AC Signal
Adjacent Conductor
Common Mode AC Remanence Immunity to 10 V/m Radiated Field 100 mV/A Range DC Measurement

(0 to 85) % RH (1 to 100) kHz
carrying a current of 10 A at 60 Hz
Voltage at 400 Hz for 100 Adc
80 MHz; 280 MHz 460 MHz; 1 GHz
280 MHz; 460 MHz

Error in % of Reading

Typical

Maximum

Drift of the zero ± 10 mA/°C

Drift of the gain ± 800 ppm/°C

± 0.5 %

see curves

± 0.5 %

± 450 mAdc

± 4 mA/A ± 7 mA/100 V
400 mAdc

2 Adc

AC/DC Current Probe Model SL361 – User Manual

4.4 POWER SOURCES
The instrument is powered by a 9 V battery (type 6LR61 or NEDA 1604A). The typical battery life is 80 h with an alkaline battery. The instrument can be powered by an external supply (5 V, 50 mA) via the type B micro-USB connector.
4.5 ENVIRONMENTAL CONDITIONS
The device must be used in the following conditions:

1 = Range of reference: (18 to 28)°C (64.4 to 82.4) °F from (20 to 75) % RH

2 = Operating range:

(-10 to 50) °C (14 to 122) °F from (10 to 45) % RH (-10 to 35) °C (14 to 95) °F from (10 to 85) % RH

3 = Storage range:

(-30 to 80) °C (-22 to 176) °F from (0 to 30) % RH (-30 to 50) °C (-22 to 122) °F from (0 to 85) % RH

% RH

100

°C

-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90

Indoor use. Pollution degree: 2 Altitude: < 6562 ft, < 2000 m Transport altitude: 39,370 ft, 12,000 m

AC/DC Current Probe Model SL361 – User Manual

4.6 MECHANICAL SPECIFICATIONS
Dimensions (L x W x H): (9.09 x 1.42 x 2.64) in (231 x 36 x 67) mm Weight: approximately 11.6 oz (330 g) with battery Measurement Lead Length: 6.5 ft (2 m) USB Cord Length: 5.9 in (15 cm)

2.64 in 67 6m7m

1.14 in 2929mm

9.0923in1 231 mm

1.42 in
3 63m6m

.826 in 2121mm

Clamping capacity: .46 in (11.8 mm) in diameter

Ø11..48Ø6m1i1nm,8

Protection by the housing IP 20 per IEC 60529 Resistance of the jaws per IEC/EN 61010-2-032 or BS EN 61010-2-032
4.7 CONFORMITY TO INTERNATIONAL STANDARDS
UL approval pending. The instrument is compliant with IEC/EN 61010-2-032 or BS EN 61010-2-032, 600 V in CAT III. Double insulation or reinforced insulation between the primary or secondary and the outer case of the handle per EN 61010-2-032 . Type of current sensor per IEC/EN 61010-2-032 or BS EN 61010-2-032:
Type A .
4.8 ELECTROMAGNETIC COMPATIBILITY
The device is in conformity with standard IEC/EN 61326-1 or BS EN 61326-1.

AC/DC Current Probe Model SL361 – User Manual

5. MAINTENANCE
WARNING: Except for the battery, the instrument contains no parts that can be replaced by personnel who have not been specially trained and accredited. Any unauthorized repair or replacement of a part by an equivalent may gravely impair safety.
To ensure optimum performance, it is important to keep the probe jaw mating surfaces clean at all times. Failure to do so may result in error in readings.
For maintenance use only specified factory replacement parts. To avoid electrical shock, do not attempt to perform any servicing unless you
are qualified to do so. To avoid electrical shock and/or damage to the instrument, do not allow water
or other foreign substances into the case.
Disconnect the unit from all circuits and test cables before opening the case.
5.1 CLEANING
Disconnect the instrument completely and turn the rotary switch to OFF. Also make sure that no cable is clamped.
Use a damp soft cloth and dry rapidly with a dry cloth or forced air. Do not use alcohol, solvents or hydrocarbons. The air gaps of the clamp must always be kept clean. Do no leave the probe in very damp places, or exposed to splashes of any
liquid substances.

AC/DC Current Probe Model SL361 – User Manual

5.2 REPLACING THE BATTERY

WARNING: Risk of electric shock. Disconnect all input(s) from the unit or remove the probe from any conductor before opening the battery cover to change the battery.
If the green battery indication LED does not light up when the probe is turned on, the battery will need to be replaced. Do not replace the battery while probe is in use. Disconnect the current probe from the circuit. Turn the current probe OFF. To replace the battery: 1. Use a screwdriver to remove the screw securing the battery compartment. 2. Slide the battery compartment cover away and off from the current probe. 3. Connect the battery to the snap-on connector; take care with the polarity.
NOTE: You can use a rechargeable Ni-MH battery, but the life will be shorter. The instrument does not recharge rechargeable batteries.
4. Place the battery in its compartment. 5. Slide the battery compartment cover back in place; make sure that it is
completely and correctly closed. 6. Screw the battery compartment cover screw back in place.

AC/DC Current Probe Model SL361 – User Manual

5.3 REPAIR AND CALIBRATION

To ensure that your instrument meets factory specifications, we recommend that the instrument be sent back to our factory Service Center at one-year intervals
for recalibration or as required by other standards or internal procedures.

For instrument repair and calibration:

You must contact our Service Center for a Customer Service Authorization Number (CSA#). Send an email to repair@aemc.com requesting a CSA#, you will be provided a CSA Form and other required paperwork along with the next steps to complete the request. Then return the instrument along with the signed CSA Form. This will ensure that when your instrument arrives, it will be tracked and processed promptly. Please write the CSA# on the outside of the shipping container. If the instrument is returned for calibration, we need to know if you want a standard calibration or a calibration traceable to N.I.S.T. (includes calibration certificate plus recorded calibration data).

Ship To:

Chauvin Arnoux®, Inc. d.b.a. AEMC® Instruments 15 Faraday Drive · Dover, NH 03820 USA Phone: 800-945-2362 (Ext. 360) / 603-749-6434 (Ext. 360) E-mail: repair@aemc.com

(Or contact your authorized distributor.)

NOTE: You must obtain a CSA# before returning any instrument.
5.4 TECHNICAL ASSISTANCE
If you are experiencing any technical problems or require any assistance with the proper operation or application of your instrument, please call or e-mail our technical support team:
Chauvin Arnoux®, Inc. d.b.a. AEMC® Instruments Phone: 800-343-1391 (Ext. 351) E-mail: techsupport@aemc.com
www.aemc.com

AC/DC Current Probe Model SL361 – User Manual

5.5 LIMITED WARRANTY
The instrument is warrantied to the owner for a period of two years from the date of original purchase against defects in manufacture. This limited warranty is given by AEMC® Instruments, not by the distributor from whom it was purchased. This warranty is void if the unit has been tampered with, abused, or if the defect is related to service not performed by AEMC® Instruments.
Full warranty coverage and product registration is available on our website at www.aemc.com/warranty.html. Please print the online Warranty Coverage Information for your records. What AEMC® Instruments will do:
If a malfunction occurs within the warranty period, you may return the instrument to us for repair, provided we have your warranty registration information on file or a proof of purchase. AEMC® Instruments will repair or replace the faulty material at our discretion.
REGISTER ONLINE AT: www.aemc.com/warranty.html
5.5.1 Warranty Repairs
What you must do to return an Instrument for Warranty Repair: First, send an email to repair@aemc.com requesting a Customer Service Authorization Number (CSA#) from our Service Department. You will be provided a CSA Form and other required paperwork along with the next steps to complete the request. Then return the instrument along with the signed CSA Form. Please write the CSA# on the outside of the shipping container. Return the instrument, postage or shipment pre-paid to:
Chauvin Arnoux®, Inc. d.b.a. AEMC® Instruments 15 Faraday Drive, Dover, NH 03820 USA Phone: 800-945-2362 (Ext. 360)
603-749-6434 (Ext. 360) E-mail: repair@aemc.com
Caution: To protect yourself against in-transit loss, we recommend that you insure your returned material.
NOTE: You must obtain a CSA# before returning any instrument.

AC/DC Current Probe Model SL361 – User Manual

NOTES:

06/25 99-MAN 100619 v00
AEMC® Instruments 15 Faraday Drive · Dover, NH 03820 USA Phone: +1 603-749-6434 · +1 800-343-1391
www.aemc.com
© 2025 Chauvin Arnoux®, Inc. d.b.a. AEMC® Instruments. All Rights Reserved.

Documents / Resources

AEMC INSTRUMENTS SL361 AC-DC Current Probe [pdf] User Manual
SL361 AC-DC Current Probe, SL361, AC-DC Current Probe, Current Probe, Probe

References

User Manual

AEMC INSTRUMENTS SL361 AC-DC Current Probe User Manual

SL361 AC-DC Current Probe

Product Information

Specifications

Product Features

Operation

Maintenance

Specifications

Reference Conditions

Electrical Specifications

FAQ

Q: How often should I recalibrate the AC/DC Current Probe?

Q: What does the voltage limiting circuit symbol on the probe
indicate?

Documents / Resources

References

Leave a comment

Cancel reply