EPever IP3000-12-Plus

Contents

EPEVER Pure Sine Wave Inverter IP3000-12-Plus User Manual

Model: IP3000-12-Plus

1. Overview

The EPEVER IPower Plus series represents a new generation of pure sine wave inverters, specifically designed for compatibility with lithium battery systems. This inverter incorporates advanced input surge current suppression technology, which is crucial for protecting lithium battery cells and their Battery Management Systems (BMS) from damaging current surges. Its smart voltage and current double closed-loop control algorithm ensure faster response times and enhanced resistance to load impacts.

Constructed with high-quality, high-power density components, the inverter delivers stable, reliable, and sufficient power output for extended use. It is suitable for a wide range of applications requiring DC to AC conversion, including solar AC power systems, vehicle systems, RV power supplies, security monitoring systems, emergency lighting systems, field power systems, and household power systems. The inverter also features EMC (Electro Magnetic Compatibility) characteristics, making it suitable for environments with higher power quality requirements.

EPEVER IPower Plus Inverter front view with LCD display

Figure 1: Front view of the EPEVER IPower Plus Inverter

2. Safety Information

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Ensure proper ventilation around the inverter to prevent overheating.
  • Do not expose the inverter to rain, moisture, or corrosive environments.
  • Keep flammable materials away from the inverter.
  • All wiring must be performed by qualified personnel and comply with local electrical codes.
  • Ensure DC input voltage matches the inverter's rated voltage (12V, 24V, or 48V).
  • Always disconnect power before performing any maintenance or wiring.
  • The inverter generates high voltage AC power; treat it with extreme caution.

3. Product Features

  • Pure Sine Wave Output: Provides high-quality AC power suitable for sensitive electronics.
  • Isolated Design: Input and output are completely isolated for enhanced safety.
  • Smart Control Algorithm: Double closed-loop control for fast response and load impact resistance.
  • EMC Characteristics: Meets higher power quality requirements.
  • Input Surge Current Suppression: Protects lithium battery systems.
  • High Power Density: Ensures stable and reliable long-term operation.
  • Output Power Factor: Up to 1.
  • Low Loss: Minimal no-load and standby power consumption.
  • Low THD: Low Total Harmonic Distortion.
  • High Conversion Efficiency: Maximizes power utilization.
  • Extensive Protection: Includes input reverse polarity, overvoltage, low voltage, output overload, short circuit, and overheating protection.
  • Air Cooling Control: Intelligent fan control based on temperature and load.
  • Rotatable LCD: 180-degree rotatable LCD for easy monitoring and parameter configuration.
  • Remote Control: Supports phone Apps and PC software for remote monitoring and control.
  • Output Voltage/Frequency Options: 220/230VAC and 50/60Hz selectable.
  • USB Ports: USB ports (5VDC/Max. 1A) for powering DC fans or charging phones (unavailable for 48V input models).
  • External Switch Contact: Allows for remote control.
  • Certifications: IEC62109, EN61000, RoHS approved.
Diagram showing various applications for the EPEVER IPower Plus inverter

Figure 2: Typical applications for the IPower Plus Inverter

4. Product Components and Interfaces

Diagram of EPEVER IP3000-12-Plus inverter with labeled components

Figure 3: Inverter component diagram (IP3000-12-Plus shown)

  1. DC input terminal positive
  2. DC input terminal negative
  3. Ventilation fan
  4. LCD display
  5. AC output terminal
  6. RS485 communication port
  7. USB output port 5VDC/Max. 1A (Note: USB function unavailable for 48V input inverters)
  8. External switch connection point
  9. Inverter switch
  10. Grounding terminal

5. Installation and Setup

5.1 Mounting

Mount the inverter in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure there is sufficient clearance around the unit for proper airflow. The mounting dimensions for the IP3000-12-Plus are 557x231.5x123 mm.

5.2 Wiring Instructions

All wiring should be done with the inverter turned OFF and disconnected from all power sources.

  • Grounding: Connect the grounding terminal (10) to an earth ground.
  • DC Input: Connect the positive (1) and negative (2) DC input terminals to your battery bank. Ensure correct polarity. Use appropriate gauge wiring for the current and distance.
  • AC Output: Connect your AC loads to the AC output terminal (5). The output voltage is 220-240VAC.
  • RS485 Communication: Connect the RS485 communication port (6) for remote monitoring via PC software or phone apps.
  • USB Output: The USB output port (7) provides 5VDC/Max. 1A for small electronic devices. Note that this port is not available on 48V input inverter models.
  • External Switch: Connect an external switch to the external switch connection point (8) for remote control of the inverter.
Rear view of EPEVER IPower Plus inverter showing AC output, RS-485, USB, and ON/OFF switch

Figure 4: Rear panel connections

Front panel of EPEVER IPower Plus inverter showing DC input and cooling fans

Figure 5: Front panel DC input and cooling fans

6. Operation

6.1 Powering On/Off

  • To turn on the inverter, press the inverter switch (9) to the 'ON' position. The LCD will illuminate, indicating operation.
  • To turn off the inverter, press the inverter switch (9) to the 'OFF' position.

6.2 LCD Display

The LCD display (4) provides real-time operational status and allows for parameter configuration. The display can be rotated 180 degrees for optimal viewing, simplifying system wiring and installation.

6.3 Ventilation Fan Operation

The cooling fan (3) operates automatically based on internal conditions to maintain optimal temperature.

  • Fan ON conditions:
    • Heat sink temperature is higher than 50°C.
    • Internal temperature is higher than 50°C.
    • Output power is higher than 50% of the rated power.
  • Fan OFF conditions:
    • Heat sink temperature is lower than 40°C.
    • Internal temperature is lower than 40°C.
    • Output power is lower than 40% of the rated power.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your inverter.

  • Cleaning: Periodically clean the inverter's exterior and ventilation openings to prevent dust buildup. Use a dry cloth; do not use liquids.
  • Connection Checks: Annually inspect all wiring connections (DC input, AC output, grounding) to ensure they are tight and free from corrosion.
  • Environmental Check: Ensure the installation environment remains dry, well-ventilated, and free from obstructions to airflow.
  • Firmware Updates: Check the manufacturer's website for any available firmware updates for your model.

8. Troubleshooting

This section provides guidance for common issues. For complex problems, contact technical support.

ProblemPossible CauseSolution
No AC outputInverter switch OFF, low DC input voltage, overload, short circuit, overheating.Turn on inverter. Check battery voltage. Reduce load. Check for short circuits. Allow inverter to cool.
Inverter shuts down frequentlyOverload, overheating, low/high DC input voltage.Reduce load. Improve ventilation. Check battery voltage.
Abnormal noise from inverterLoose connections, internal component issue, fan noise.Check all connections. If noise persists or is unusual, contact support.
LCD display not workingNo power, display fault.Check DC input power. If power is present, display may be faulty; contact support.

9. Specifications

The following table details the technical specifications for the IPower Plus series, including the IP3000-12-Plus model.

Detailed technical specifications table for EPEVER IPower Plus series inverters

Figure 6: Technical Specifications Overview

Technical Specifications table for IPower Plus series inverters

Figure 7: Detailed Technical Specifications

ParameterIP3000-12-Plus
Continuous Output Power3000W @ 35°C @ Rated input voltage
Surge Power6000W @ 5s
Output Voltage220VAC (±3%); 230VAC (-7%~+3%)
Output Frequency50/60Hz ±0.2%
Output WavePure Sine Wave
Output Distortion THDTHD ≤3% (Resistive load)
Rated Input Voltage12VDC
Input Voltage Range10.8 - 16VDC
Max. Output Efficiency>94% (30% loads)
No-load Current<1.6A
USB Output5VDC/Max. 1A
RS485 Com. Port5VDC/200mA
Dimension (LxWxH)557x231.5x123 mm
Net Weight10.5kg
Operating Temperature Range-20°C ~ 60°C (Refer to the Reduced capacity curve)
Relative Humidity<95% (N.C.)
EnclosureIP20

10. User Tips

Based on general user feedback for similar inverters, consider the following tips for optimal performance:

  • Battery Sizing: Ensure your battery bank is adequately sized for your inverter's power output and your expected load duration. Undersized batteries can lead to frequent low voltage shutdowns.
  • Cable Sizing: Use thick, high-quality DC cables between the battery and inverter to minimize voltage drop and maximize efficiency.
  • Load Management: Avoid consistently running the inverter at its maximum continuous power. Operating at 70-80% of its rated capacity can extend its lifespan and improve efficiency.
  • Monitoring: Utilize the remote monitoring features (phone app or PC software) to keep track of the inverter's performance and battery status, especially in off-grid setups.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original point of purchase or the official EPEVER customer service. Keep your purchase receipt and product serial number handy when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.