BASEUS CRCRQB02

Contents

Baseus Car Air Compressor Electric Tyre Inflator Pump

Model: CRCRQB02

1. Introduction

Thank you for purchasing the Baseus Car Air Compressor Electric Tyre Inflator Pump. This portable digital air pump is designed for convenient and efficient inflation of various items, including car tires, motorcycle tires, bicycle tires, basketballs, and air cushions. It features intelligent tire pressure monitoring, automatic inflation stop, and a built-in LED light for night use.

Baseus Car Air Compressor Electric Tyre Inflator Pump in Tarnish color, next to a car tire.
The Baseus Portable Digital Air Pump, designed for versatile inflation needs.

2. Safety Precautions

  • Do not leave the device unattended during operation.
  • Keep out of reach of children.
  • Avoid over-inflating; the device features an automatic stop function, but always monitor pressure.
  • Do not expose the device to extreme temperatures or direct sunlight for prolonged periods.
  • Ensure the air nozzle is securely attached before starting inflation.
  • Exceeding 150psi may damage the sensor.

3. Package Contents

Please check the package for the following items:

  • Baseus Car Air Compressor Electric Tyre Inflator Pump
  • Inflation Hose
  • Various Air Nozzles (e.g., for basketball, bicycle)
  • 0.5M Type-C Charging Cable
  • User Manual (PDF available online)
Image showing the Baseus inflator pump, inflation hose, various nozzles, and Type-C charging cable in its retail packaging.
All items included in the product package.

4. Setup

4.1 Initial Charging

Before first use, fully charge the inflator pump using the provided 0.5M Type-C charging cable. Connect the Type-C cable to the pump and a suitable power source (e.g., car charger, USB adapter). The charging time is approximately 4-5 hours.

Product demonstration video showing unboxing, initial charging, and usage.

4.2 Attaching the Inflation Hose and Nozzle

  1. Install the corresponding air nozzle onto the inflation hose based on the equipment to be inflated.
  2. Connect the inflation hose to the air pump's inflation port.
Four-step visual guide for using the inflator pump: 1. Install nozzle, 2. Adjust mode, 3. Connect and start, 4. Stop and remove.
Visual instructions for connecting the nozzle and starting inflation.

5. Operation

5.1 Power On/Off and Mode Selection

  • Power On: Short press the 'M' button to turn on the device.
  • Mode Selection: Short press the 'M' button to cycle through different inflation modes (e.g., car, motorcycle, bicycle).
  • Unit Selection: Long press the 'M' button for 3 seconds until the unit flashes, then short press 'M' to toggle between PSI, Bar, kPa, kg/cm².
  • Power Off: Press and hold the 'OK' button for 3 seconds when the device is on.
Close-up of the inflator pump's digital display and control buttons, with labels for M, OK, +, -, and Light buttons.
Detailed view of the control panel and button functions.

5.2 Setting Tire Pressure

  • After selecting the desired mode, use the '+' and '-' buttons to adjust the preset air pressure value.
  • The device features an intelligent digital display that shows the current and target pressure.
Image showing the digital display of the inflator pump with tire pressure ranges for cars (2.3-2.5 bar), motorcycles (1.8-3.0 bar), and bicycles (30-65 psi).
Automatic display of tire pressure and recommended ranges for different vehicles.

5.3 Inflation Process

  1. Connect the air nozzle to the tire valve or item to be inflated. The device will automatically detect and display the current tire pressure.
  2. Press the 'OK' button lightly to start inflation.
  3. The pump will automatically stop when the preset tire pressure is reached, preventing over-inflation.
  4. Once inflation is complete, stop the pump (if not already automatic) and pull out the air nozzle.

5.4 LED Lighting Function

  • Turn On Light: Short press the 'LIGHT' button once.
  • Strobe Light: Short press the 'LIGHT' button again for strobe mode.
  • SOS Flashing Light: Short press the 'LIGHT' button a third time for SOS flashing mode.
The inflator pump's LED light illuminating a car tire at night, demonstrating its utility for safe night inflation.
The built-in LED light provides illumination for night use and emergency signaling.

5.5 Inflation Capacity

A fully charged pump can inflate approximately:

  • 9 car tires (from 2.0 bar to 2.5 bar in about 4 minutes per tire)
  • 17 motorcycle tires (in about 2 minutes per tire)
  • 8 bicycle tires (in about 3 minutes and 40 seconds per tire)
  • 54 size 5 footballs (in about 1 minute per football)
Infographic showing the inflation capacity of a fully charged pump for car, motorcycle, and bicycle tires.
Approximate number of items that can be inflated on a full charge.

5.6 Applicable Equipment

The pump is suitable for a wide range of equipment:

  • Cars, SUVs, Business cars
  • Motorcycles, Bicycles
  • Kayaks, Basketballs, Air cushions
Diagram showing various items the inflator pump can be used for, including cars, SUVs, business cars, motorcycles, kayaking equipment, bicycles, basketballs, and air cushions.
Versatile use for various vehicles and inflatable items.

6. Maintenance

6.1 Cleaning and Storage

  • Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Store the pump and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Ensure the device is fully charged before long-term storage to maintain battery health.

6.2 Heat Dissipation

The air pump is designed with double-sided heat dissipation, featuring 21 small air outlets on both sides. The motor's connecting shaft drives a fan to quickly transfer internal heat, ensuring stable operation. Avoid blocking these outlets during use.

Internal view of the inflator pump highlighting the double-sided heat dissipation design with air outlets.
Internal design showing the heat dissipation system.

6.3 Battery Care

To prolong battery life, it is recommended to pause for 5 minutes after using the pump for 10 minutes. Continuous use without breaks may cause the metal shell's temperature to rise, potentially damaging the motor.

7. Troubleshooting

ProblemPossible CauseSolution
Pump not turning onLow battery or device off.Charge the device fully. Short press 'M' button to power on.
Slow inflationBattery not fully charged or internal issue.Ensure the device is fully charged. If problem persists, contact support.
Settings not savedThis may be a firmware characteristic.Re-enter desired settings before each use.
Battery does not hold charge well after prolonged useBattery degradation over time.Ensure proper charging and usage habits (e.g., taking breaks during long inflation). Battery life naturally decreases over time.
Sensor damageOver-inflation beyond 150psi.Always monitor pressure and do not exceed recommended limits.

8. Specifications

FeatureDetail
Brand NameBASEUS
Model NameCRCRQB02, BS-CG002 (Baseus Energy Source Inflator Pump)
Item TypePUMPS
MaterialMetal Body
VoltageWireless
Input Voltage5V/2.4A
Battery Capacity2000mAh*3 (6000mAh total)
Rated Energy25.9Wh (from JSON), 27Wh (from desc.html)
Power54W
Charging TimeAbout 4-5 hours
Pressure Gauge Range5-120psi effective working range; 5-150psi effective detection range
Item Weight0.61kg (610g)
Item Dimensions (L x W x H)7.82cm x 4.26cm x 14cm
Charging Cable0.5M Type-C Cable
Diagram showing the dimensions of the Baseus inflator pump: 140.2mm height, 78.2mm length, 42.6mm width.
Product dimensions.

9. User Tips

  • Battery Longevity: To maximize battery life, avoid completely draining the battery frequently. Charge it regularly, especially before long periods of non-use.
  • Setting Persistence: Be aware that some settings (like pressure units) might not be saved after powering off. Double-check your desired settings before each inflation task.
  • Craftsmanship: Users have noted the excellent craftsmanship of the device, suggesting good build quality.

10. Warranty and Support

For detailed warranty information and customer support, please refer to the official Baseus website or the seller's support channels.

A comprehensive user manual in PDF format is available for download:

View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.