BASEUS Super Energy Car Jump Starter

Contents

BASEUS Super Energy Car Jump Starter User Manual

Model: Super Energy Car Jump Starter (Air, Pro, Max Versions)

Brand: BASEUS

1. Introduction

The BASEUS Super Energy Car Jump Starter is a versatile and powerful device designed to provide instant and fast jumpstarting for 12V vehicles, even at zero voltage. It also functions as a portable power bank for charging mobile devices and features multiple emergency lighting modes. This manual provides essential information on how to safely and effectively use, maintain, and troubleshoot your jump starter.

BASEUS Super Energy Car Jump Starter with smart ignition clamps

Image: BASEUS Super Energy Car Jump Starter with smart ignition clamps.

2. Safety Information

Please read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

General Safety Precautions:

  • Ensure proper polarity when connecting the clamps: Red clamp to the positive (+) terminal and black clamp to the negative (-) terminal of the vehicle battery. Reverse connection may cause irreversible damage to the device and/or vehicle.
  • Remove the jump starter immediately after the vehicle engine starts.
  • Do not expose the device to rain or wet conditions.
  • Do not disassemble or modify the device.
  • Keep out of reach of children.

Built-in Safety Protections:

Smart Ignition Clamps with 8 Protections

Image: Smart Ignition Clamps with 8 Protections: Safe operation, Intelligent detection, OD anti-reverse connection.

Nine Safety Protections

Image: Nine Safety Protections: Lithium polymer battery, Overcharge protection, Voltage stabilization protection, Constant current protection, Short circuit protection, Over discharge protection, Anti-anti protection, Temperature protection, Overcurrent protection.

The device is equipped with smart ignition clamps that feature 8 protections, including safe operation, intelligent detection, and anti-reverse connection. Additionally, the jump starter itself incorporates nine safety protections to ensure worry-free use, such as overcharge, short circuit, and temperature protection.

3. Package Contents

Please check the package contents upon receipt:

  • Jump Starter Power Bank x1
  • Smart Ignition Clip x1
  • USB Charging Cable x1
The Packing Accessories

Image: The Packing Accessories, showing the jump starter, smart ignition clip, and USB cable.

4. Product Overview

Features:

  • Efficient Jump Starting: Instant and fast jumpstarting even at zero voltage.
  • Wide Compatibility: Supports 12V gasoline and diesel vehicles.
  • Power Bank Functionality: Equipped with USB and Type-C ports for charging mobile devices.
  • Emergency Lighting: Features flashlight, SOS, and flashing light modes.
  • Digital Display: Precise battery level indication.
  • Long-lasting Battery: Low consumption for extended standby time.
  • Safe to Board: 37Wh rated power conforms to civil aviation standards for hand luggage.
USB and Type-C ports on the jump starter

Image: USB and Type-C ports for charging mobile devices.

Jump starter charging a phone and tablet

Image: Dual USB Output, One-Stop Power Station, showing the jump starter charging a phone and tablet.

Jump starter being carried on a plane

Image: Safe to Board With, indicating 37Wh conforms to civil aviation standards for hand luggage.

5. Specifications

The BASEUS Super Energy Car Jump Starter is available in different versions with varying capacities and peak currents. Please refer to the table below for detailed specifications.

Parameter Comparison Table for Jump Starter Air, Pro, Max Versions

Image: Parameter Comparison Table for Jump Starter Air, Pro, Max Versions.

Product Specifications
FeatureAir Version (BS-CH001)Pro Version (CRJS03)Max Version (CRJS04)
Capacity10000mAh / 3.7V / 37Wh12000mAh / 3.7V / 44.4Wh20000mAh / 3.7V / 74Wh
Rated Output CapacityN/A7000mAh13000mAh
Peak Current1000A1000A2000A
Starting Current500A600A1000A
Input (Type-C)5V/2.4A (Max)5V/3A (Max)5V/2A, 9V/2A (Max)
USB Output5V/2.4A (Max)5V/2.4A (Max)5V/3A, 9V/3A, 12V/2.5A (Max)
Type-C OutputN/A5V/3AN/A
Total Output12W (Max)N/A42W (Max)
Starting Voltage12V12V12V
Suitable For12V 4.0L Gasoline Car & 12V 2.5L Diesel Car12V 6.0L Gasoline Car & 12V 3.5L Diesel Car12V 8.0L Gasoline Car & 12V 4.0L Diesel Car
LED DisplayNoYesYes
Item WeightN/A470g~1kg
Dimensions (L x W x H)85*160*30mm83*163*36.5mm94*184*43mm
External Testing CertificationMSDS, CE, CCCMSDS, CE, CCCMSDS, CE, CCC

Note: The above parameters are measured manually. It is normal for errors of 3-5mm to occur. Specifications may vary slightly between different production batches.

6. Setup

Charging the Jump Starter:

Before first use, fully charge the jump starter using the provided USB charging cable and a compatible USB power adapter (not included). The digital display (if available) will show the battery percentage, or indicator lights will show charging status. When fully charged, all lights will be on or the display will show 100%.

7. Operating Instructions

7.1. Jump Starting a Vehicle

Follow these three easy steps to jumpstart your vehicle:

  1. Connect: Insert the intelligent ignition clamps into the EC5 interface of the jump starter. The indicator on the clamps will flash red and green alternately.
  2. Clip: Open the hood and clip the red positive (+) ignition clamp to the corresponding positive (+) terminal of your car's battery. Then, clip the black negative (-) ignition clamp to the corresponding negative (-) terminal.
  3. Start: Get in the car and start the engine. Please remove the jump starter immediately once jumpstarting is accomplished.
3 Easy Step Jumpstarting for Newbies

Image: 3 Easy Step Jumpstarting for Newbies, illustrating connection, clipping, and starting the engine.

Warning: Make sure the red clamp of the jumper cables is connected to the positive terminal of the battery and the black clamp is connected to the negative terminal. Reverse connection may cause irreversible damage.

Jumpstart Vehicles Even in -20°C

Image: Jumpstart Vehicles Even in -20°C, highlighting cold weather performance.

Jumpstart Even at -20°C with 60°C max operating temp

Image: Jumpstart Even at -20°C, with built-in smart chip and low temperature protection resistors for extreme conditions.

Video: Product demonstration showing the jump starter in use, including connection and engine start.

7.2. Using as a Power Bank

The jump starter can also be used to charge your mobile devices. Simply connect your device to the USB or Type-C output ports using a compatible charging cable.

  • USB Port: 5V/2.4A (Max)
  • Type-C Port: 5V/2.4A (Max) (Note: Type-C output may vary by model, refer to specifications table)

7.3. Emergency Lighting

The device includes a powerful flashlight with multiple modes for emergency situations:

  • Lighting (Always On): Press and hold the power button for 3 seconds to turn on the flashlight.
  • SOS Mode: Press the power button again to switch to SOS mode (three long, three short flashes).
  • Flashing Light Mode: Press the power button a third time to activate the flashing light mode (alternating scintillation).
Emergency Lighting in the Dark

Image: Emergency Lighting in the Dark, showing the jump starter's flashlight function.

Lighting modes: Always on, SOS, Flashing

Image: Lighting modes: Always on, SOS, Flashing. Note: The light conforms to the international SOS mode.

8. Maintenance

Charging:

To maintain optimal battery health, it is recommended to fully charge the jump starter every 3-6 months, even if not in use. This helps preserve the battery's capacity and extends its lifespan.

Storage:

Store the device in a cool, dry place away from direct sunlight and extreme temperatures. The device is designed to retain over 85% of its charge after 9 months of idle standby, demonstrating low power consumption.

Long-lasting Battery with low consumption

Image: Long-lasting Battery, showing approximately 0.05mA low consumption and 270 days of battery life.

9. Troubleshooting

  • Device is beeping and flashing red/green: This usually indicates a safety protection mechanism. Disconnect the clamps from the car battery and the jump starter, then reconnect them ensuring correct polarity. If the issue persists, the car battery might be too deeply discharged for a safe jumpstart, or there might be an internal fault.
  • Vehicle does not start after jumpstarting attempt: Ensure the jump starter is adequately charged. Check that the clamps are securely connected to the correct battery terminals. If the vehicle still doesn't start, there might be other issues with the vehicle's battery or starting system.
  • Jump starter is not charging: Ensure the USB charging cable is properly connected to both the jump starter and a working USB power source. Try a different cable or power adapter.
  • Flashlight not working: Press and hold the power button for 3 seconds to activate the flashlight. If it still doesn't work, the device might be out of charge.

10. User Tips

  • For Deeply Discharged Batteries: If your car battery is completely dead, the jump starter's protection might activate (indicated by beeping/flashing). Try disconnecting and reconnecting the clamps to reset the safety mechanism. Some users have successfully started vehicles even without a connected car battery, but this is generally not recommended due to potential voltage fluctuations.
  • Charging Indication: For models with an LED display, the percentage indicates the charge level. For models without a display, a full charge is typically indicated when all charging indicator lights are solid.
  • Versatile Use: Beyond jumpstarting, this device is excellent as a portable power bank for phones, tablets, and even some laptops, making it a valuable tool for outdoor activities or emergencies.
  • Cold Weather Performance: The jump starter is designed to operate effectively in cold temperatures (down to -20°C), but ensure it is adequately charged for optimal performance in extreme conditions.
  • Storage Case: Consider purchasing a protective case for your jump starter and accessories to keep them organized and safe, especially if stored in your vehicle.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official BASEUS website or contact your retailer. Keep your purchase receipt as proof of purchase.

© 2023 BASEUS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.