BASEUS BA01

Contents

Baseus BA01 Bluetooth 5.0 Audio Receiver User Manual

Model: BA01

Introduction

The Baseus BA01 Bluetooth 5.0 Audio Receiver is designed to transform your wired audio systems into wireless Bluetooth-enabled devices. This compact adapter allows you to stream high-quality audio from your smartphone or other Bluetooth-enabled devices to your car stereo, home speakers, or wired headphones. It also supports hands-free calling with its built-in microphone, enhancing convenience and safety.

Baseus BA01 Bluetooth Receiver with 3.5mm jack and USB connector

Figure 1: Baseus BA01 Bluetooth Receiver

Setup Instructions

1. Package Contents

  • Baseus BA01 Bluetooth 5.0 Audio Receiver

2. Connecting the Receiver

The Baseus BA01 requires both a 3.5mm AUX input for audio output and a USB port for power. It does not contain an internal battery and must be continuously powered to function.

  1. Connect the 3.5mm Audio Jack: Plug the 3.5mm audio jack of the Baseus BA01 into the AUX input port of your car stereo, home speaker system, or wired headphones.
  2. Connect the USB Power Cable: Plug the USB connector of the Baseus BA01 into a powered USB port. This can be a USB port in your car, a USB wall adapter, a power bank, or a USB port on a computer/laptop.
Connecting the Baseus BA01 to a car's USB and AUX ports

Figure 2: Connecting the receiver in a car

Connecting the Baseus BA01 to a wired speaker to enable Bluetooth audio

Figure 3: Connecting the receiver to a wired speaker

Operating Instructions

1. Bluetooth Pairing

  1. Once the Baseus BA01 is connected to both AUX and a power source, it will automatically power on and enter pairing mode.
  2. On your smartphone or other Bluetooth-enabled device, go to the Bluetooth settings.
  3. Search for available devices and select "Baseus BA01" from the list to connect.
  4. Once successfully paired, you will hear an audio confirmation (no annoying voice prompts).

2. Audio Playback

After successful pairing, you can now play audio from your connected device. The sound will be transmitted wirelessly to the audio system connected to the Baseus BA01.

3. Hands-Free Calling

The Baseus BA01 features a built-in microphone for hands-free communication.

  • Answering/Ending Calls: Use the multi-function button on the receiver to answer or end incoming calls.
  • Voice Navigation: When connected in a car, voice navigation prompts from your phone will be played through the car's speakers.
Close-up of the Baseus BA01 showing the built-in microphone and control button for hands-free calls

Figure 4: Hands-free call feature with built-in microphone

4. Automatic Reconnection

The Baseus BA01 is designed to automatically reconnect to the last paired device when it is powered on and the paired device's Bluetooth is active.

Video 1: Product demonstration showing car connection, phone pairing, music playback, voice navigation, and hands-free calls.

Maintenance

  • Keep the device dry. Avoid exposure to moisture or liquids.
  • Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
  • Avoid extreme temperatures, as this can shorten the lifespan of electronic components.
  • Do not attempt to disassemble or modify the device, as this will void the warranty.

Troubleshooting

1. No Sound or Poor Sound Quality

  • Check Connections: Ensure both the 3.5mm AUX jack and the USB power cable are securely connected.
  • Verify Pairing: Confirm that the Baseus BA01 is successfully paired with your audio source device.
  • Adjust Volume: Check the volume levels on both your source device and the connected audio system.
  • Interference/Noise: If you experience humming, static, or background noise (especially from the engine in a car), try using a different USB power source. Some power adapters or car USB ports may introduce interference.

2. Cannot Pair with Device

  • Power On: Ensure the Baseus BA01 is powered on (USB connected).
  • Bluetooth Enabled: Make sure Bluetooth is enabled on your source device.
  • Forget Device: On your source device, forget any previous pairings with "Baseus BA01" and attempt to pair again.
  • Proximity: Ensure your source device is within close range of the receiver.
  • Other Devices: Disconnect any other Bluetooth devices that might be trying to connect to the receiver.

3. Hands-Free Call Issues

  • Low Microphone Volume: If the other party cannot hear you clearly, try speaking closer to the receiver.
  • Interference During Calls: Some minor interference during calls may occur, but it should not be critical.

4. Device Not Turning On

  • Check USB Power: Ensure the USB power source is active and providing power. Try a different USB port or power adapter.

5. Resetting the Device

To reset or unpair the device, simply disconnect it from its USB power source and then reconnect it. This power cycle will typically clear its connection state.

Specifications

FeatureDescription
Brand NameBASEUS
Model NumberBA01
Wireless TypeBluetooth 5.0
InterfaceUSB (for power), 3.5 MM (for audio output)
ContentAUDIO
Sound TrackDouble (Stereo)
Support Memory CardNo
Support Apt-xNo (SBC codec supported)
Support AACNo
FeatureBuilt-in microphone for hands-free calls
High Definition SupportNone specified
WIFI StandardNone
CertificationCE, RoHS
OriginMainland China
Product Dimensions (approx.)16 cm (Length) x 6 cm (Width) x 3 cm (Height)
Product Weight (approx.)0.08 kg
Exploded view of the Baseus BA01 highlighting the high-quality chip for stable transmission

Figure 5: High-quality chip for stable transmission

Close-up of the 3.5mm jack with gold plating for improved sound quality and oxidation resistance

Figure 6: Gold-plated 3.5mm jack for enhanced durability and sound quality

User Tips

  • The Baseus BA01 is a Bluetooth receiver only; it cannot transmit audio from a non-Bluetooth source (like a TV) to Bluetooth headphones. It converts a wired audio input (AUX) into a Bluetooth-enabled input.
  • For optimal sound quality and to minimize potential interference, ensure a stable and clean power supply from the USB port. Some users found that trying different USB power sources helped reduce background noise.
  • The device supports Bluetooth 5.0 and is backward compatible with older Bluetooth versions like 4.1 and 4.2.
  • The coiled cable design helps prevent tangling and provides flexibility in connection length.
  • The built-in microphone generally provides clear audio for hands-free calls, making it suitable for in-car use.

Warranty and Support

For warranty claims or technical support, please refer to the retailer or manufacturer's official website. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.