1. Overview
The EPEVER BLE RJ45 D Bluetooth Module adopts Bluetooth 5.0 transmission and BLE (Bluetooth Low Energy) technology. This module enables data collection, communication, and wireless monitoring of connected devices such as Epever solar controllers and inverters.
Features:
- Support communication via phone APP
- Support data encryption
- Use immediately after connecting; easy and convenient operation
- Feature fast communication and strong anti-interference ability
- Directly powered by the communication port
- Up to 10 meters of communication distance
2. Appearance
The EPEVER BLE RJ45 D module is a compact device designed for easy integration. Below are various views of the module and its RJ45 connector pin definition.

Front view of the EPEVER BLE RJ45 D Bluetooth Module.

Back view showing the product barcode and CE mark.

Angled view of the Bluetooth module.

Angled view displaying the serial number.

Side view of the Bluetooth module.

Another angled view of the Bluetooth module.
RJ45 Connector Pin Definition:
| Pin | Definition | Pin | Definition |
|---|---|---|---|
| 1 | +5VDC | 5 | RS485-A |
| 2 | +5VDC | 6 | RS485-A |
| 3 | RS485-B | 7 | GND |
| 4 | RS485-B | 8 | GND |
3. Setup and System Connection
For devices equipped with an RJ45 communication port, simply connect the EPEVER BLE RJ45 D Bluetooth module directly to the port. No additional cables are required for the connection between the module and the device.

System connection diagram: Epever controller connected to the Bluetooth module, communicating with a smartphone APP.
4. Operating Instructions (APP Operation)
To monitor and set parameters for your Epever device, you need to add the Bluetooth module and the connected device to the cloud server via the website (https://hncloud.epsolarpv.com) or the dedicated mobile application. This section focuses on APP operation.
4.1. Download APP
Download the official Epever monitoring application from your device's app store:

Apple APP Store

Google Play
4.2. APP Usage Demonstration
Watch this video for a step-by-step guide on using the mobile application to connect, monitor, and configure your Epever device via the Bluetooth module.
Video demonstrating the Solar Guardian app login, data synchronization, device connection, real-time data display, and parameter settings for Epever devices.
5. Specifications
Detailed technical specifications for the EPEVER BLE RJ45 D Bluetooth Module:

Specifications table for the EPEVER BLE RJ45 D Bluetooth Module.
| Parameter | EPEVER BLE RJ45 D |
|---|---|
| Working voltage | 5V± 0.5V (Powered by RJ45 port) |
| Power consumption | Average: 5V@10mA; Peak: 5V@60mA |
| Communication distance | ≤ 10m |
| Serial port baud rate | 115200bps |
| Communication method | RS485 to Bluetooth |
| Connection port | RJ45 |
| Bluetooth protocol | Bluetooth 5.0 |
| Dimension (L x W x H) | 63mm x 19mm x 13.8mm |
| Work temperature | -20℃~70℃ |
| Enclosure | IP30 |
| Net Weight | 8.0g |
6. Maintenance
The EPEVER BLE RJ45 D Bluetooth Module is designed for low maintenance. To ensure optimal performance and longevity:
- Keep the module clean and free from dust and moisture.
- Avoid exposing the module to extreme temperatures or direct sunlight for prolonged periods.
- Ensure the RJ45 connection is secure and free from physical damage.
- Do not attempt to disassemble or modify the module, as this will void any potential warranty and may cause damage.
7. Troubleshooting
If you encounter issues with your EPEVER BLE RJ45 D Bluetooth Module, consider the following:
- No Connection to APP: Ensure Bluetooth is enabled on your smartphone and the module is correctly plugged into the device's RJ45 port. Verify that the Epever device is powered on.
- Intermittent Connection: Check the distance between your smartphone and the module. The maximum communication distance is 10 meters. Obstacles can reduce this range.
- APP Not Displaying Data: Confirm that the module and the connected device have been successfully added to the cloud server or the APP. Try refreshing the data within the app.
- Module Not Powering On: Ensure the RJ45 port on your Epever device is supplying the correct voltage (5V).
- APP Compatibility: Ensure you are using the official Epever monitoring application and that it is updated to the latest version.
If problems persist, consult the support resources provided by Epever or contact their customer service.
8. User Tips
- The Bluetooth module is designed to provide operational data, including charging and functioning status, directly to your smartphone via the dedicated app.
- The official Epever app is available for both Android and Apple devices, allowing broad compatibility for monitoring.
- For optimal performance, ensure your Epever controller or inverter is compatible with the BLE RJ45 D module.
9. Warranty and Support
For information regarding product warranty, technical support, or service, please refer to the official Epever website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for any warranty claims.