1. Product Overview
The Baseus GoTrip VA1 Max is a versatile and compact portable air compressor designed for rapid inflation of various items, from vehicle tires to sports balls. It features a powerful battery, multiple inflation modes, and integrated lighting for convenience.
Key Features
- Rapid Inflation: Refills an R175 tire from 2.0 Bar (29 PSI) to 2.3 Bar (33 PSI) in just 59 seconds.
- Ultra-Compact Design: Small enough to fit in your glovebox or backpack.
- Long Battery Life: 7500mAh capacity (3×2500mAh), supports 5-6 tire inflations on a single charge.
- Multiple Inflation Modes: Car, Bicycle, Motorcycle, Ball, and Custom.
- Light Modes: Includes Flashlight, SOS, and Strobe.
Note: The above data is provided by the Baseus Lab; actual use will vary depending on specific circumstances.

2. Package Contents
Ensure all items are present and in good condition upon unboxing:
- Air Inflator × 1
- Air Hose × 1
- Nozzles: Schrader (Car / Motorcycle) × 1, Presta (Bicycle) × 1, Ball Needle × 1
- USB-C Cable × 1
- User Manual × 1


3. Product Structure

- LED Screen (Pressure / Battery level)
- Power Button
- Mode Button
- Inflate Button
- Air Pressure Preset +
- Air Pressure Preset -
- LED Light (Flashlight / SOS / Strobe)
- Inflation Port
- USB-C Charging Port
4. Setup & Operation
4.1 Preparation
- Check the battery level on the LED screen (recommended: above 20%). Charge if needed using the included USB-C cable.
- Confirm the required pressure for the tire or item (refer to the car manual or product label).
- Select the appropriate nozzle:
- Car / Motorcycle: Schrader valve.
- Bicycle: Schrader or Presta valve.
- Balls / Toys: Needle adapter.
4.2 How to Use (Approx. 5-6 Minutes)
- Take out the inflator: Ensure the device is intact and free of damage.
- Attach the nozzle: Connect the appropriate nozzle to the air hose, then twist the hose securely into the inflation port. Firmly clamp the nozzle onto the tire valve and hold for at least 3 seconds to ensure an airtight seal.
- Set pressure:
- Press and hold the Power button to turn on the device.
- Press the Mode button once to select the appropriate inflation mode:
- Car: 36 PSI (2.4 BAR)
- Bike: 45 PSI (3 BAR)
- Motorcycle: 35 PSI (2.3 BAR)
- Ball: 8 PSI (0.53 BAR)
- Custom: 3-150 PSI.
- Press and hold the Mode button to enter unit selection mode. Then press once to switch between PSI / bar / kg/cm² / kPa.
- Use + / - buttons to set desired pressure.
- Inflate: Press the Inflate button to start inflating the tire. It will stop automatically when the target pressure is reached.

4.3 Light Modes (Optional)
When the device is powered on, press the Power button once to switch between Flashlight, SOS, and Strobe modes. Press and hold the Power button to turn the light off.

5. User Tips
- Cool the device for 1 minute after use to avoid overheating and ensure longevity.
- The custom inflation mode is ideal for specific pressure requirements not covered by presets.
6. Safety & Maintenance
6.1 Safe Use
- Do not aim the nozzle at people or animals.
- Children must be supervised by an adult when using the device.
- Do not exceed the recommended pressure (max 150 PSI) to avoid the risk of explosion or damage.
6.2 Environment & Usage Time
- Avoid exposure to rain (this device is not waterproof) and high temperatures.
- Each inflation should take less than 10 minutes. After 3 consecutive uses, let the device cool down for 5 minutes.
6.3 Storage & Care
- Store the device in a dry, shaded place.
- If unused for over 3 months, charge above 50% every 2 months.
- Wipe shell and screen with a dry cloth. Do not wash with water. Clean air vents regularly with a soft brush.
- Always use the original USB-C cable (5V/2.4A) to charge.
7. Troubleshooting
If you encounter any issues with your Baseus GoTrip VA1 Max, refer to the following common problems and solutions:
- Device won't power on: Press and hold the Power button for 2 seconds. If there's no response, charge the device for 30 minutes and try again.
- Air leakage: Make sure the nozzle is securely clamped. Check the alignment between the valve and the adapter.
- Screen not lighting up: Charge the device and restart. If the issue persists, contact customer support.
- Unusual noise: Stop using the device immediately and contact customer support.
7.1 Error Codes
| Code | Description |
|---|---|
| E01 | Charging Low Temperature Protection |
| E02 | Charging High Temperature Protection |
| E03 | Abnormal Charging Voltage or Current |
| E04 | Battery Protection During High-Temp Inflation |
| E05 | Battery Protection During Low-Temp Inflation |
| E06 | Motor Stall Protection |
| E07 | Abnormal Air Leakage Protection |
| E20 | Input Undervoltage |
| E21 | Battery NTC Open or Short Circuit |
| E22 | Cylinder NTC Open or Short Circuit |
| E24 | Air Pressure Sensor Fault |
| E25 | Motor Circuit Open |
| E26 | Cylinder Overtemperature Protection |
| E28 | Charging Timeout |
8. Specifications
| Attribute | Value |
|---|---|
| Product Name | Baseus GoTrip VA1 Max Cordless Inflator |
| Model | C01196 |
| Battery Capacity | 7500mAh (11.1V DC, 27.75Wh) |
| Battery Cells | 2500mAh × 3 |
| Motor Power | Max 100W |
| USB-C Input | 5V/2.4A |
| Dimensions (L x W x H) | 131.6mm x 94.6mm x 48.46mm (approx.) |
| Weight | About 510g (Without packaging) |

9. Warranty & Support
9.1 Warranty
This product comes with a 1-year limited warranty. Please retain your proof of purchase for warranty claims. Do not disassemble the product yourself, as this may void the warranty.
9.2 Customer Support
For any technical assistance or support, please contact Baseus customer service:
- Email: care@baseus.com
- Phone (US): +1 800 220 8056
A detailed user manual is available in PDF format. You can view it at Baseus GoTrip VA1 Max User Manual (PDF).