1. Introduction
The Baseus A2Pro car vacuum cleaner is mini and compact, easy to carry around. It can help you maintain a spotless living environment, both in your car and at home.
2. Components and Package Contents
The Baseus A2Pro vacuum cleaner consists of the main unit, which includes a dust bin and filter, and a handle for ergonomic use.
Package Including:
- Main Unit x1
- 2-in-1 Suction Nozzle x1 (flat and brush nozzle)
- Blowpipe x1
- Type-C Charging Cable x1
- User Manual x1
- Warranty Card x1
3. Setup and Charging
Before first use, ensure the vacuum cleaner is fully charged.
- Make sure the power is off.
- Plug the power adapter into a power outlet.
- Plug the charging cable into the charging port of the vacuum cleaner.
- The charging indicator light will flash white, indicating that the vacuum cleaner is during charging.
- The charging indicator light will stay on, indicating that the vacuum cleaner is fully charged.
4. Operation
Follow these steps to operate your Baseus A2Pro vacuum cleaner:
-
Preparation: Before use, ensure that the filter is installed properly and there's sufficient battery left.
Ensure the filter is correctly installed and the device is charged. -
Start Vacuuming: Press the switch to start vacuuming.
Press the power button to begin cleaning. -
Using Nozzles: Use the 2-in-1 suction nozzle (brush or flat) and blowpipe for special areas or gaps. The flat nozzle is ideal for crevices, while the brush nozzle is suitable for general surfaces.
The 2-in-1 suction nozzle (flat and brush) and blowpipe for versatile cleaning.
The blowpipe attachment is useful for dislodging dirt from hard-to-reach gaps.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your vacuum cleaner.
-
Emptying the Dust Bin: After turning off the vacuum cleaner, rotate and remove the dust bin. Take out the filter, empty the garbage inside the dust bin, and clean the dust bin.
The transparent dust bin is easy to remove and empty. -
Cleaning the Filter: Clean the dust and filth attached to the filter. It is recommended to clean the filter after 5-6 uses. Wash the filter with clean water and reinstall it only when it's completely dried.
Gently tap the filter to remove accumulated dust and debris.
Allow the filter to dry completely before reinstallation. The A2Pro features a 100% larger, high-efficient HEPA filter, offering up to 99.7% dust removal rate and preventing secondary pollution. It is recommended to change the HEPA filter every 3 months.
Diagram illustrating the larger, high-efficiency HEPA filter.
Tip:
If the product suddenly shuts down, the suction force is getting weak, or there's severe overheating at the handle, it is probably caused by the blockage of the filter. Please empty the dust bin and clean the filter immediately, and keep the air flow inside the cleaner ventilated.
6. Troubleshooting
This section addresses common issues you might encounter. If the problem persists, please contact customer service.
6.1. The product does not work
- The battery may be low; please charge the battery.
- You may not have connected the vacuum cleaner to the charger properly. Reconnect the vacuum cleaner to the charger using the charging cable. The charging indicator should light up, indicating that the vacuum cleaner is charging.
- You may not have plugged the adapter into the power outlet properly; please re-plug the adapter into the power outlet.
- If the product still doesn't work, please contact customer service for help.
6.2. The charging indicator does not light up
- Make sure the adapter is properly plugged into the power outlet and the vacuum cleaner is turned off.
6.3. The vacuum cleaner does not vacuum normally
- The dust bin may not be installed properly on the product. Please install the dust bin correctly.
- The dust bin may be full. Please empty the dust bin.
- The filter may be blocked. Clean the filters.
6.4. Dust spilled from the vacuum cleaner
- The dust bin may be full. Please empty the dust bin.
- The dust bin may not be installed properly on the product. Please install the dust bin correctly.
- The filter may not be placed properly in the dust bin. Install the filter properly into the dust bin.
6.5. Increasing operating noise and overheating at the handle
- The filter is blocked and the dust bin is full. Please clean the filter and dust bin immediately.
7. Specifications
| Feature | Specification |
|---|---|
| Name | Baseus A2 Pro Car Vacuum Cleaner |
| Model No. | A2Pro |
| Color | Black/White/Blue |
| Material | ABS+PC |
| Weight | About 508g (without packaging) |
| Input | 5V/2A |
| Rated Power | 80W |
| Battery Capacity | 2000mAh*3 |
| Charging Time | ~3.5 hours |
| Noise | <65dB |
| Charging Port | Type-C |
| Item Length | 26.8 cm (268mm) |
| Item Width | 6.1 cm (61mm) |
| Item Height | 6.1 cm (61mm) |
| Special Features | Wireless Car Vacuum Cleaner, 6000Pa Power Suction Force, Upgraded Design for Deeper Cleaning, 20 Cleans with One Full Charge, Mini and Compact, Laborsaving Design |
| Certification | RoHS, FCC, CE |
8. User Tips
- "Very handy for small areas..." - The compact size makes it ideal for tight spaces in cars and homes.
- "It works very well." - Users report high satisfaction with its cleaning performance.
9. Warranty and Support
This product comes with a warranty card included in the package. Please refer to the warranty card for specific terms and conditions.
For further assistance or if you cannot resolve an issue using this manual, please contact the customer service center in your country/region. The full user manual in PDF format can be viewed here.
Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Address: 2th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen
Hotline: +86-4000-712-711
Website: www.baseus.com
10. Safety Warnings and Precautions
Warnings:
- Before connecting the product to the power supply, please check whether the voltage marked by the product is consistent with the local power supply voltage.
- If the vacuum cleaner is damaged, please do not use.
- This product is not suitable for people (including children) who are not physically sound, are mentally handicapped, or lack relevant experience and operating knowledge, unless someone responsible for their safety supervises or directs their use of this product.
- Please do not let children play with this product.
- Never use on wet surfaces.
- Never use on flammable or combustion materials.
- Never immerse the vacuum cleaner or the power cord in liquid.
Precautions:
- Before cleaning the vacuum cleaner, be sure to unplug the adapter from the wall outlet.
- Only use the charging cable provided with this product to charge the vacuum cleaner. During charging, the adapter will be slightly hot, which is normal.
- When using, be sure to disconnect the product from the power supply.
- Do not block the exhaust vent when vacuuming.
- Please turn off the power during charging.
- Please install the filter before use.
- The temperature range for product charging, storage and use is between 5°C~35°C.
- Do not disassemble the battery, and prevent it from contacting with fire, heat or direct sunlight.