LYZRC L200 Plus GPS Drone

Contents

LYZRC L200 Plus GPS Drone User Manual

Model: L200 PRO MAX

1. Important Safety Information

WARNING: CHOKING HAZARD - small parts. Not for children under 3 years.

This product is suitable for personnel aged 14 and above to operate.

  • Always ensure correct assembly and debugging to avoid accidents.
  • Maintain a safe distance of at least 2 meters from yourself and others during flight and landing to prevent injury.
  • The company and seller are not responsible for any loss, damage, or bodily injury caused by improper use or operation.
  • Do not disassemble or modify the aircraft, as this may cause malfunction.
  • Keep the drone away from high-speed rotating propellers to avoid twisting or cutting.
  • The motor is a heating component; avoid touching it immediately after use to prevent burns.
  • Avoid direct exposure to the light-emitting diode laser radiation.
  • Do not use the model close to the ear; misuse may cause hearing damage.

1.1 Flight Environment Guidelines

  • Fly in open areas, away from crowds, high-rise buildings, high-voltage power lines, airports, and water bodies.
  • Avoid flying in adverse weather conditions such as strong winds (exceeding 7m/s or 16mph), rain, snow, or thunderstorms.
  • Do not fly within visible range at night.
  • Ensure a strong GPS signal for stable flight and return functions.
  • Avoid areas with strong magnetic fields (e.g., magnetic mines, parking lots, large metal structures) as they can interfere with the drone's magnetic sensors.
  • For image transmission, ensure the remote control antenna is deployed and fly in an open area without obstacles. The effective image transmission distance is approximately 2 kilometers.
Drone flying in an open area with GPS signal and flight altitude indicators

Figure 1: Safe Flight Environment Guidelines

1.2 Charging Precautions

  • Always supervise charging of rechargeable batteries.
  • Keep batteries away from high temperatures, open flames, and flammable materials.
  • Do not short-circuit or squeeze the battery to avoid explosion.
  • Do not immerse the battery in water; store in a dry place.
  • Do not leave batteries unattended during charging.
  • Use a 5V 1-2A USB charging adapter. Do not use high-voltage chargers.

2. Product Overview

The LYZRC L200 Plus GPS Drone is a foldable, professional aerial photography quadcopter featuring a 4K HD dual lens camera, 3-axis mechanical self-stabilizing gimbal, and 360° laser obstacle avoidance. It is designed for both beginners and enthusiasts, offering stable flight and advanced intelligent functions.

LYZRC L200 Plus GPS Drone with features highlighted

Figure 2: LYZRC L200 Plus GPS Drone

2.1 Aircraft Components

  • 3-axis pan head
  • Propellers
  • Brushless Motors
  • LED lights
  • Intelligent lithium battery
  • Obstacle avoidance sensor
Diagram showing the main components of the drone

Figure 3: Drone Components

2.2 Package Contents

The standard package includes:

  • 1x LYZRC L200 Plus Drone
  • 1x Remote Control
  • 1x 7.4V 3800mAh Drone Battery
  • 1x USB Charging Cable (5V)
  • 1x Screwdriver
  • 4x Spare Fan Blades
  • 1x Operation Manual (this document)
  • 1x APP Manual
  • 1x Storage Bag
Image showing all items included in the drone package

Figure 4: Package Contents

3. Setup Guide

3.1 Unfolding the Drone

The L200 Plus features a foldable design for portability. Gently unfold the drone arms until they lock into place. Ensure all arms are fully extended before flight.

Image demonstrating the folding design of the drone

Figure 5: Folding Design

3.2 Propeller Installation

Ensure all propellers are installed in the correct orientation. Propellers are distinguished by A/B markings. Incorrect installation will prevent normal flight.

Diagram showing correct propeller installation for A and B type propellers

Figure 6: Propeller Installation

3.3 Battery Installation and Removal

Installation: Insert the 7.4V 3800mAh intelligent lithium battery into the aircraft battery compartment in the direction indicated by the arrow. Ensure it is securely in place.

Removal: Press the battery clip and then pull the battery out in the direction of the arrow.

Diagram showing how to install and remove the drone battery

Figure 7: Battery Installation/Removal

3.4 Charging the Drone and Remote Control

Connect the drone battery to a 5V 1-2A charging adapter using the USB charging cable. The battery indicator light will be on during charging and turn off when fully charged. Charging time is approximately 4 hours for the drone battery and 0.5 hours for the remote control battery.

The remote control has a built-in 3.7V 400mAh lithium battery and does not require replacement. When charging the remote control, the charging indicator light is red and turns off when fully charged.

Diagram showing how to charge the drone battery and remote control

Figure 8: Charging Connections

3.5 Camera Protective Cover

Before starting the aircraft, remove the protective cover from the camera. First, press the protective cover down, then remove it in the direction of the arrow as shown in the figure.

Diagram showing how to remove the camera protective cover

Figure 9: Removing Camera Cover

4. Operating Instructions

4.1 Remote Control Functions

Familiarize yourself with the remote control layout and functions:

Detailed diagram of the remote control with labeled buttons and functions

Figure 10: Remote Control Layout

Control Function
Accelerator LeverUp/Down (Throttle), Left/Right (Yaw)
Direction Control LeverFront/Rear (Pitch), Left/Right (Roll)
GPS SwitchToggle GPS mode on/off
Headless Mode / One-Key Takeoff/LandingShort press for Headless Mode, Long press for One-Key Takeoff/Landing
Gyroscope / Geomagnetic CalibrationShort press for Gyroscope Calibration, Long press for Geomagnetic Calibration
One-Click ReturnInitiates automatic return to home
Power SwitchTurns remote control on/off
(Roller) Camera Angle AdjustmentAdjusts the camera's vertical angle
Photo/Video ButtonShort press to take photos, Long press to record video
Speed Switching / Obstacle Avoidance SwitchShort press for speed switching, Long press to toggle obstacle avoidance (default off)

Remote Control Low Power Reminder: When the remote control battery icon flashes, stop flying immediately and charge the remote control.

4.2 Preparation Before Takeoff

  1. Ensure both the remote control and drone battery are fully charged.
  2. Fully extend the drone arms and blades.
  3. First, turn on the drone switch, then turn on the remote control switch for frequency comparison.

4.3 Aircraft Code Matching Operation Guide

  1. Press and hold the aircraft power button for 3 seconds to turn it on. Place it horizontally on the ground. The front and rear LED lights will flash for self-inspection.
  2. Turn on the remote control. It will emit a beep, and the front LED light of the aircraft will become permanently on, while the rear LED light flashes, indicating successful code checking.

If the front and rear lights flash simultaneously, and the remote control indicator light is also flashing, it indicates unsuccessful frequency synchronization or low drone battery. Restart the drone and re-synchronize.

4.4 Gyroscope Calibration

After successful frequency alignment, place the aircraft on a flat surface. Briefly press the gyroscope calibration button on the remote control. The front and rear lights will flash faster, indicating successful calibration.

4.5 Geomagnetic Correction

When flying outdoors in GPS mode, the first flight requires geomagnetic correction:

  1. After successful code matching, press and hold the geomagnetic correction button on the remote control for 2 seconds. The aircraft's LED light will quickly flash.
  2. Lift the aircraft 1 meter above the ground, level with the ground, and rotate it three times clockwise. The remote control will emit a short beep, the rear LED light will remain on, and the front LED light will flash.
  3. Stand the aircraft upright, perpendicular to the ground, and rotate it three times clockwise. The remote control will emit a long beep, and the front LED light will remain on, while the rear LED light flashes.

Geomagnetic correction must be completed in both horizontal and vertical directions. If it fails, repeat the process. Once corrected in the same location, it is not necessary to correct it every time.

4.6 Connecting to WiFi (APP)

Enable WiFi on your mobile device and select "VS-GPS-BY-*******" from the list. Open the VS GPS PRO APP for real-time image transmission and advanced flight functions. Refer to the VS GPS PRO manual for specific APP instructions.

Drone with remote control and smartphone displaying live feed

Figure 11: 5G Frequency Band and Stabilization

4.7 GPS Signal Search and Motor Unlocking

After frequency alignment, the LED light will flash rapidly. When the LED light stops flashing and becomes permanently on, or the remote control emits a beep, it indicates that the GPS signal has been acquired (requires more than 10 satellites) and the drone can be unlocked for takeoff.

To unlock the motors, simultaneously push the throttle lever and direction lever towards the lower left and right corners. After the motors start, flight can commence.

Before unlocking, fully unfold the blades.

4.8 Mode Switching (Indoor/Outdoor)

  • Indoor Mode: After successful code matching, the aircraft defaults to GPS mode indoors. To take off indoors, press the GPS switch on the remote control to switch to indoor mode to unlock takeoff.
  • Outdoor (GPS) Mode: In an outdoor environment, the aircraft will automatically enter search mode after matching the code. When the number of satellites reaches about 6, positioning is complete, and the remote control will beep to indicate GPS mode. The arm light will be on for a long time to unlock and take off.

Attention: Optical flow positioning and hovering may be unstable in environments with water surfaces, dim light, large height differences, smooth reflective ground, or bicolor stripes, leading to unstable flight and body shaking.

4.9 One-Click Takeoff/Landing

After unlocking, press and hold the one-key takeoff/landing button for 2 seconds. The aircraft will automatically take off and hover at about 1.5 meters. During flight, press and hold the same button for 2 seconds to automatically land.

4.10 Headless Mode

Press the headless mode button. The remote control will emit a "drdi" sound. When unlocked, the direction the drone's nose points is considered the front. In headless mode, the drone's orientation relative to the pilot remains constant, regardless of its actual heading.

4.11 Return Flight Functions

The drone has a return function to prevent loss. The return point is recorded when GPS receives more than 10 satellites for the first time during takeoff or flight.

  • One-Click Return: When the GPS signal is strong (more than 10 satellites), press the one-click return button on the remote control. The drone will return to the recorded point. You can still control the drone with the joystick to avoid obstacles during return. Press the return button again to exit return mode.
  • No Signal Return: If the remote control signal is interrupted (with good GPS signal and compass working normally), the drone will automatically return to the signal location and then reconnect to the remote control.
  • Low Power Return: When the drone's battery is low, the indicator light will flash slowly, and the remote control will emit a continuous warning sound. The aircraft will automatically return to the takeoff point (within 30 meters altitude and distance). The remote control cannot cancel low power return.

Precautions for Returning: The aircraft cannot avoid obstacles during automatic return. Return is not possible if the GPS signal is poor or not working.

Drone with GPS intelligent return feature, showing a map pin

Figure 12: GPS Intelligent Return

4.12 Photography and Video Recording

  • Take Photo: Short press the photo/video button on the remote control. The mobile APP will display a progress bar for photo archiving.
  • Record Video: Press and hold the photo/video button on the remote control for 2 seconds. The mobile APP will display the recording time and save the video.
Remote control button for taking photos and recording videos

Figure 13: Photo/Video Button

4.13 Camera Angle Control

Adjust the shooting angle of the pan-tilt camera by pressing the scroll wheel button on the remote control.

Diagram showing camera angle adjustment using the remote control roller

Figure 14: Camera Angle Adjustment

4.14 Intelligent Flight Functions (via APP)

  • GPS Follow Me & Image Follow Me: The drone can track the pilot or a designated object, freeing hands for creative shooting.
  • Tap Flight (Waypoint Trajectory): Customize a multi-point route on the map, and the drone will fly along the specified path.
  • Point Surround: Set a point of interest, and the drone will orbit around it, with adjustable radius.
  • Drone Recovery Function: Check the last known position of the drone via the map in the APP.

Video 1: LYZRC L200 Plus Drone Features Demonstration

5. Maintenance and Upkeep

  • Battery Care: After flight, charge the battery and store it. If not used for an extended period, charge the battery at least once every 3 months to prevent excessive discharge and permanent damage.
  • Cleaning: Keep the drone clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Propeller Replacement: In case of damage, replace propellers with genuine spare parts. Ensure correct A/B orientation during installation.
  • Storage: Store the drone and accessories in the provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Regular Checks: Periodically check all components for damage or wear. If any damage is found, repair or replace parts before further use.

6. Troubleshooting

  • Drone not taking off / Unstable flight:
    • Ensure drone and remote control batteries are fully charged.
    • Verify propellers are installed correctly (A/B matching).
    • Perform frequency code matching, gyroscope calibration, and geomagnetic correction as per instructions.
    • Check for strong GPS signal (more than 10 satellites) for outdoor flight.
    • Avoid flying in environments that interfere with optical flow positioning (water, dim light, reflective surfaces).
  • Remote control not responding:
    • Check remote control battery level and charge if necessary.
    • Re-perform frequency code matching.
  • Drone lost control / Not returning:
    • Ensure GPS signal is strong (more than 10 satellites) for return functions.
    • Automatic return functions (One-Click, No Signal, Low Power) do not avoid obstacles.
  • Poor image transmission / APP connection issues:
    • Ensure 5G WiFi is enabled on your mobile device and connected to the drone's WiFi network.
    • Fly in an open area with minimal interference.

7. Specifications

Category Details
Product NameLYZRC L200 Plus GPS Drone
ModelL200 PRO MAX
Drone Weight249g
Motor TypeBrushless Motor (1503, 2100/KV)
ESC30A
Expanded Size35 * 35 * 9.3 CM
Folded Size9 * 15.5 * 9.3 CM
Max Flight Speed45 KM/H
Max Ascent Speed4 M/S
Max Descent Speed3 M/S
Max Flight Altitude120 M
Max Take-off Altitude4500 M
Hover TimeUp to 25 minutes
Remote DistanceUp to 500M (actual)
Aircraf Operating Frequency2.4 GHz
Camera Mount Type3-Axis Gimbal
Camera IntegrationCamera Included (Dual Lens)
Camera Features4K HD Video Recording, 110° Electric Adjustable Lens, 5x Digital Zoom
Video Maximum Resolution4K (4096*2160) / 2048*1080 (APP)
Image Transmission5G WiFi (300-400M actual)
Obstacle Avoidance Types360° Laser Avoidance (Detection Distance: ≤20M)
GPSYes (Dual GPS/GLONASS)
Drone Battery7.4V 3800mAh Polymer Lithium Battery
Remote Control Battery3.7V 400mAh
ChargingUSB 5V, Max 15.2W
Working Temperature-10℃ to 50℃

Note: The marked 3000M control distance is a theoretical value without interference and occlusion. Actual control distance is up to 500M, and image transmission distance is 300-400M.

8. User Tips

  • This drone is highly recommended for beginners due to its stable flight and intelligent features.
  • While the drone weighs 249g (often exempt from registration), always confirm local aviation regulations before flying.
  • Consider purchasing an additional battery for extended flight sessions, as the flight time is approximately 25 minutes per battery.
  • An SD card is not included in the package. For recording 4K video, a high-speed 32G SD card is recommended.
  • Some users have noted slight variations in reported battery capacity (e.g., 3000mAh vs 3800mAh). The official specification is 3800mAh.

9. Frequently Asked Questions (FAQ)

Q: Does this drone have GPS and a return-to-home feature?
A: Yes, the LYZRC L200 Plus features dual GPS/GLONASS positioning and includes one-key return, low-power return, and no-signal return functions.
Q: What is the flight distance?
A: The actual control distance is up to 500 meters, and the image transmission distance is 300-400 meters without interference.
Q: Can I get it with two batteries?
A: Battery configurations may vary by seller or package option. Please check the product listing for available battery bundles or inquire about purchasing additional batteries separately.
Q: Why is there a version with a different control?
A: Different versions or models of drones may come with varying remote control designs or features. Ensure you are referring to the L200 Plus model for accurate information.

10. Warranty and Support

We provide 24-hour customer service. If you have any questions about operation, maintenance, or after-sales support, please feel free to contact the seller or customer service.

For additional detailed instructions, you may refer to the official user manual in PDF format: View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.