MOONDROP NICE BUDS

Contents

MOONDROP NICE BUDS User Manual

Model: NICE BUDS (MD-IEM-075)

1. Important Safety Information

Please read all instructions carefully before using this product. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use (e.g., daily music listening, call answering for models with a microphone).
  • Inspect the product before each use; do not use if damaged (e.g., broken cable, cracked earphone cavity, damaged plug).
  • Follow installation and operation guidelines to avoid injury; do not pull the cable forcefully to prevent wire breakage.
  • Do not use the earphone at excessively high volume for a long time, as it may cause hearing damage.
  • Keep the earphone away from high temperature, humidity, and corrosive environments to avoid damage to internal components.

2. Setup and First Use

2.1 Unpacking and Initial Preparation

  1. Carefully remove the MOONDROP NICE BUDS from their packaging.
  2. Remove all protective films from the earphone cavity and the 3.5mm plug.
  3. Choose a suitable foam earbud from the included accessories and install it onto the earphone cavity. The earphone's cavity features an earbud limit design to prevent the foam earbud from shifting during use.
  4. For models equipped with a microphone, ensure that the cable and control button are intact and free from damage.
MOONDROP NICE BUDS with foam ear-tips installed
MOONDROP NICE BUDS with foam ear-tips installed, highlighting the 15.4mm dynamic driver and ergonomic design.
Close-up of sponge ear-tips positioning limit design
Close-up view of the sponge ear-tips positioning limit design, ensuring secure fit and comfort.

2.2 Ergonomic Wearing Design

The earphone features an asymmetric geometric design for a snug and comfortable fit, conforming better to the user's ear. This design aims to reduce uncomfortable sensations during extended wear and enhance bass response.

Ergonomic asymmetric wearing design of MOONDROP NICE BUDS
Illustration of the ergonomic asymmetric wearing design for a comfortable and secure fit.

3. Operating Instructions

3.1 Connecting the Earphones

Insert the 3.5mm plug of the earphone into the audio interface of your device (e.g., mobile phone, computer, or portable player). Ensure the plug is fully inserted to avoid sound distortion or intermittent audio.

MOONDROP NICE BUDS with 3.5mm jack
The MOONDROP NICE BUDS featuring a standard 3.5mm audio jack for universal compatibility.

3.2 Basic Operations (for models with microphone)

  • Music Playback: Short press the control button once to play or pause music.
  • Call Answering: Short press the control button once to answer an incoming call. Short press again to end the call.
  • Sound Adjustment: The earphone itself does not have a volume adjustment button. Adjust the volume directly through your connected audio device.

3.3 Audio Performance Tips

The MOONDROP NICE BUDS are designed to be easy to drive, meaning low-power front-ends (such as mobile phones) can easily achieve sufficient sound pressure. If your audio device has adjustable gain, it is recommended to use a low gain setting to prevent sound degradation caused by over-driving.

4. Maintenance and Care

4.1 After Each Use

  1. Unplug the earphone from your device.
  2. Remove the foam earbuds (if used) and gently clean the earphone cavity with a dry, soft cloth to remove any dust or debris.
  3. Store the earphone in a dry, cool, and clean place. Avoid winding the cable tightly, as this can lead to internal wire breakage.
  4. Keep the earphone away from heavy objects that could damage the earphone or cable.

4.2 General Maintenance

  • Regularly inspect the cable and plug for any signs of damage (e.g., fraying, cuts, bends). If damage is found, discontinue use immediately and contact the manufacturer for after-sales service.
  • Do not attempt to disassemble the earphone yourself. Doing so will void the product warranty.
  • The earphone is equipped with a 15.4mm neodymium magnetic dynamic unit and a rear cavity bass enhancement tube. Avoid collision or impact to prevent damage to these internal components.

5. Troubleshooting

  • No Sound: Ensure the 3.5mm plug is fully inserted into your audio device. Check the volume level on your device. Test with another audio source or device to rule out device-specific issues.
  • Sound Distortion: Verify the 3.5mm plug is fully and correctly inserted. Reduce the volume on your audio device, especially if using a high-gain output.
  • Intermittent Audio: Check the cable for any visible damage or kinks. Ensure the plug is securely connected.
  • Microphone Not Working (if applicable): Ensure the plug is fully inserted. Check if the microphone is enabled on your connected device.
  • Physical Damage: If the cable, plug, or earphone housing is physically damaged, discontinue use to prevent further issues and contact customer support.

6. Specifications

FeatureSpecification
Product NameMOONDROP NICE BUDS Wired Flat Headphone
ModelNICE BUDS (MD-IEM-075)
Driver Configuration15.4mm Dynamic Driver
Impedance32Ω±15% (@1kHz)
Sensitivity122dB/Vrms (@1kHz)
Frequency Response20Hz-20kHz (IEC60318-4, -3dB)
Total Harmonic Distortion (THD)≤0.1% (@1kHz, 94dB)
Plug Type3.5mm Stereo Plug (Line Type)
CommunicationWired
StyleWired flat-head earbuds
MaterialPlastic
Earcups TypeSemi-open
Headphone Pads MaterialMemory Foam
Voice Assistant Built-inNo
WaterproofNo
Active Noise-CancellationNo
OriginMainland China

6.1 Acoustic Design

Precision-tuned front cover with multi-pore acoustic design
Detail of the precision-tuned front cover with multi-pore acoustic design and waveguide channels for enhanced sonic transparency.

The MOONDROP NICE BUDS feature a precision-tuned front cover with an optimized porosity pattern and integrated acoustic waveguide channels. This design ensures coherent transmission and natural dispersion of sound waves across all frequency bands.

Diagram of 15.4mm dynamic driver and double rear-cavity damping acoustic system
Detailed diagram illustrating the 15.4mm specially-tuned neodymium magnetic large dynamic driver, bass enhanced airflow channel design, and double rear-cavity damping acoustic system.

The specially tuned 15.4mm neodymium magnetic dynamic driver enhances resonance characteristics for better sound coupling, reproducing a natural and pleasant timbre. The dual rear-cavity damping parallel acoustic system features a bass-enhanced airflow tube designed directly into the mold, along with four large-sized, high-damping vent holes. This setup accurately controls the bass and mid-bass frequencies across two distinct frequency bands, delivering a punchy bass while maintaining a clean and transparent mid-range sound.

6.2 Available Options

Nice Buds are available in two color options: Transparent and Black, offering a simple yet attractive visual presentation.

MOONDROP NICE BUDS in Transparent and Black color options
The MOONDROP NICE BUDS are available in Transparent and Black color options.

6.3 Package Contents

  • Nice Buds! Earphones
  • Sponge Ear-tips
  • User Manual
  • Certificate

7. User Tips

  • Many users appreciate the sound quality for the price, noting it's a great value.
  • The earbuds are generally comfortable for extended wear.
  • While the sound quality is good, some users suggest that the right/left markings could be more visible. Consider marking them yourself for easier identification.

8. Warranty and Support

8.1 Manufacturer Information

Company Name: Chengdu MOONDROP Technology Co., Ltd
Company Address: Floor 4, Building 2, No. 606, West Section of Haike Road, Cross-Strait Science and Technology Industrial Development Park, Wenjiang District, Chengdu
Telephone: 2862348525
Email: support@moondroplab.com

8.2 EU Authorized Representative

Company Name: eVatmaster Consulting Gmbh
Address: Raiffeisen Street 2 B11, 63110 Rodgau, Hessen, Germany
Email: contact@evatmaster.com

8.3 Compliance Information

This product must comply with all applicable safety and regulatory requirements in the market where it is sold. This includes regulations relating to electrical safety, electromagnetic compatibility, or environmental compliance, and may require conformity marking (e.g., CE) and related documentation.

For a detailed user manual in PDF format, please refer to the official document: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.