BASEUS A2 Pro Mini Car Vacuum Cleaner

Contents

Baseus A2Pro Wireless Car Vacuum Cleaner User Manual

Model: A2 Pro Mini Car Vacuum Cleaner

1. Product Introduction

The Baseus A2Pro car vacuum cleaner is a mini and compact device, designed for easy portability. It helps you maintain a spotless living environment in your car or home.

Baseus A2Pro Wireless Car Vacuum Cleaner in a car interior

Image: Baseus A2Pro Wireless Car Vacuum Cleaner, highlighting its compact design and 6000Pa suction power.

2. Product Specifications

AttributeSpecification
NameBaseus A2 Pro Car Vacuum Cleaner
Model No.A2 Pro
Input5V/2A
Rated Power80W
Battery Capacity2000mAh * 3 (6000mAh total)
Charging Time~3.5 hours
Noise<65dB
Charging PortType-C
Color OptionsBlack, White, Blue
Product Size (L x W x H)26.8cm x 6.1cm x 6.1cm
Item Weight508g (without packaging)
MaterialABS+PC
Special FeaturesWireless Car Vacuum Cleaner, 6000Pa Power Suction Force, Upgraded Design for Deeper Cleaning, 20 Cleans with One Full Charge, Mini and Compact, Laborsaving Design
CertificationRoHS, FCC, CE
Product dimensions diagram

Image: Product dimensions showing 268mm length and 61mm width.

Detailed specifications table

Image: Detailed specifications including product code and barcode for different colors.

3. Package Contents

The package includes the following components:

  • 1 x Main Unit
  • 1 x 2-in-1 Suction Nozzle (flat and brush)
  • 1 x Blowpipe
  • 1 x Type-C Charging Cable
  • 1 x User Manual
  • 1 x Warranty Card
Packaging accessories for Baseus A2Pro

Image: All included accessories: main unit, 2-in-1 nozzle, blowpipe, and Type-C charging cable.

4. Setup and Charging

4.1 Initial Setup

  1. Before first use, ensure that the filter is installed properly inside the dust bin.
  2. Ensure the vacuum cleaner has sufficient battery charge.
User instructions diagram showing filter installation

Image: Step 1 of user instructions, showing proper filter installation.

4.2 Charging Instructions

  1. Make sure the vacuum cleaner is turned off.
  2. Plug the power adapter (not included) into a power outlet.
  3. Plug the Type-C charging cable into the charging port of the vacuum cleaner.
  4. The charging indicator light will flash white, indicating that the vacuum cleaner is currently charging.
  5. Once the charging indicator light stays on continuously, the vacuum cleaner is fully charged.
Battery life diagram showing 20 cleans per charge

Image: Diagram illustrating the battery capacity, capable of 20 cleans with one full charge.

5. Operating Instructions

  1. Press the power switch to start vacuuming.
  2. For special areas, use the 2-in-1 suction nozzle (brush nozzle) or the blowpipe.
  3. For gaps and tight spaces, use the 2-in-1 suction nozzle (flat nozzle) or the blowpipe.
Flat nozzle in use for vacuuming

Image: The 2-in-1 flat nozzle effectively cleaning dirt from a car floor.

Brush nozzle in use for vacuuming

Image: The 2-in-1 brush nozzle sweeping and vacuuming dust and hairs from a pet bed.

Cordless vacuum cleaner in use in a living room

Image: Cordless design allows for unlimited reach, suitable for various cleaning tasks around the home.

5.1 Safety Tips

  • Never use the vacuum cleaner on wet surfaces.
  • Never use it on flammable or combustible materials.
  • Never immerse the vacuum cleaner or the power cord in liquid.

5.2 Warnings

  1. Before connecting to a power supply, verify that the product's voltage matches the local power supply.
  2. Do not use the vacuum cleaner if it is damaged.
  3. This product is not suitable for individuals (including children) with physical, mental, or experiential limitations, unless supervised by a responsible person.
  4. Do not allow children to play with this product.

5.3 Precautions

  1. Before cleaning, unplug the adapter from the wall outlet.
  2. Only use the provided charging cable. Slight heating of the adapter during charging is normal.
  3. When in use, disconnect the product from the power supply.
  4. Do not block the exhaust vent during vacuuming.
  5. Turn off the power during charging.
  6. Ensure the filter is installed before use.
  7. Operating, charging, and storage temperature range: 5°C to 35°C.
  8. Do not disassemble the battery or expose it to fire, heat, or direct sunlight.

6. Maintenance

6.1 Emptying the Dust Bin

  1. After turning off the vacuum cleaner, rotate and remove the dust bin.
  2. Take out the filter, empty the debris from the dust bin, and clean the dust bin.
Diagram showing how to empty the dust bin

Image: Transparent dust bin with 120ml large capacity, showing ease of emptying.

6.2 Cleaning the Filter

  1. Gently tap the filter to remove accumulated dust and dirt.
  2. It is recommended to wash the filter with clean water after 5-6 uses.
  3. Ensure the filter is completely dried before reinstalling it into the dust bin.
HEPA filter diagram showing airflow and dust removal

Image: Diagram of the 100% larger high-efficient HEPA filter, showing up to 99.7% dust removal rate and optimized airflow.

7. Troubleshooting

7.1 Product Does Not Work

  • Battery may be low: Charge the battery.
  • Vacuum cleaner not connected properly to charger: Reconnect using the charging cable. The charging indicator should light up.
  • Adapter not plugged properly: Re-plug the adapter into the power outlet.
  • If issues persist, contact customer service.

7.2 Charging Indicator Does Not Light Up

  • Ensure the adapter is properly plugged into the power outlet and the vacuum cleaner is turned off.

7.3 Vacuum Cleaner Does Not Vacuum Normally

  • Dust bin not installed properly: Install the dust bin correctly.
  • Dust bin is full: Empty the dust bin.
  • Filter is blocked: Clean the filter.

7.4 Dust Spilled from the Vacuum Cleaner

  • Dust bin is full: Empty the dust bin.
  • Dust bin not installed properly: Install the dust bin correctly.
  • Filter not placed properly: Install the filter properly into the dust bin.

7.5 Increasing Operating Noise and Overheating at the Handle

  • The filter is blocked and the dust bin is full. Clean the filter and dust bin immediately.

8. Warranty and Support

This product comes with a warranty card included in the package. For any issues not resolved by the troubleshooting guide, please contact customer service.

Manufacturer Information:

  • Manufacturer: Shenzhen Baseus Technology Co., Ltd.
  • Address: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen
  • Hotline: +86-4000-712-711
  • Website: www.baseus.com

The full text of the EC Declaration of Conformity can also be found on the manufacturer's website.

9. User Tips

  • While the vacuum offers strong and weak modes, some users note the absence of a dedicated 'turbo' mode.
  • The charging indicator light changes from flashing white to solid white when fully charged, but there is no numerical display for the battery level.
  • Users frequently inquire about replacement filters. Ensure to check the product specifications for filter compatibility and availability.

© 2024 Baseus. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.