Introduction
The MOONDROP KLUKAI TWS Earphones are a special collaboration with Girls' Frontline 2: Exilium, featuring a Planar Magnetic Driver for high-fidelity audio, True Wireless Stereo (TWS) functionality, and advanced noise-canceling capabilities. These earphones are designed to provide an immersive audio experience with unique character-themed voice prompts and design elements.
Package Contents
Please check the package for the following items:
- Charging case (x1)
- Earbuds (x1 pair)
- Charging cable (x1)
- Eartips (x3 pair - XL, M, S)
- User Manual (x1)
- Doll Pendant (x1)
- Service card (x1)
- Quick guidance (x1)
- Protective Case (x1)
- Redemption card (x1)
Product Overview
Familiarize yourself with the main components of your earphones and charging case:
Charging Case:
- Indicator: Shows charging status.
- Charging Port: For connecting the charging cable.
- Charging Contact: Connects with earbuds for charging.
Earbuds:
- Microphone: For calls and voice commands.
- Touch Area: For controlling playback, calls, and modes.
- Charging Contact: Connects with charging case for power.
Setup
1. Charging
Place the earbuds into the charging case to begin charging. The charging case prioritizes its own charging state if both are charging simultaneously.
- Earbuds Charging State:
- When charging: White indicator is always on.
- Fully charged: LED indicator goes out.
- Case Charging State:
- When charging: Orange indicator is always on.
- Fully charged: LED indicator goes out.
2. Bluetooth Pairing
- Take the earbuds out of the charging case. They will automatically turn on with a "It's been a while, Commander" prompt.
- On your device (smartphone, tablet, etc.), go to the Bluetooth settings.
- Find "H.I.D.E.404_Klukai" in the list of available devices and select it to pair.
- You will hear a "Du Du Du" warning during pairing mode, followed by "What took you so long? I've been waiting for a while." upon successful connection.
Operating Instructions
Power On/Off
- Power On: Earbuds automatically turn on when taken out of the charging case.
- Power Off:
- Place earbuds back into the charging case.
- If no device is paired within 3 minutes, earbuds will automatically turn off.
- Low battery: Earbuds will turn off with the prompt "We need to pull back for now."
Restore Factory Settings
To clear pairing information and restore factory settings, press and hold the touch area of both earphones for 8 seconds.
Disconnection and Reconnection
- Over-distance Disconnection: Earbuds will automatically disconnect if they move beyond the effective working distance, with the prompt "Just let me relax for a bit." They will automatically reconnect if they re-enter the effective working distance within 3 minutes, with the prompt "What took you so long? I've been waiting for a while."
- Manual Disconnection: While connected (and not actively playing audio), simultaneously long-press the touch area of both the Right and Left earbuds for 3 seconds. Alternatively, manually turn off Bluetooth on your connected device.
- Reconnection: Earbuds will automatically reconnect to the last paired device when taken out of the charging case. If one earbud is quiet or disconnected, place both back in the charging case and try to reconnect.
Basic Controls (Touch Area)
The touch area on each earbud allows for various functions:
- Voice Assistant: Click the left/right earbud 3 times to start, and 3 times again to exit. (Note: Some Android smartphones may require enabling voice assistant in settings.)
- Music Playback:
- Play/Pause: Click the left/right earbud once.
- Previous Song: Double-click the left earbud.
- Next Song: Double-click the right earbud.
- Call Management:
- Answer Call: Click the left/right earbud once.
- Decline Call: Long press the left/right earbud for 1.5 seconds.
- Hang Up: Click the left/right earbud once.
- Third-party Call: Click the left/right earbud to keep the original call and answer the new call.
- Switch Call: Double-click the left/right earbud.
Advanced Modes
- Noise-canceling Mode: In the turn-on state, long-press the Right/Left earbud for 1 second to switch between modes.
- Noise-canceling prompt: "Mm"
- Regular mode prompt: "Hm"
- Transparency mode prompt: "Hmph."
- Low-latency Game Mode: In the turn-on state, click the right/left earbud 4 times to switch mode.
- Game mode prompt: "Move out"
- Exiting game mode prompt: "Well, thinking of 404 as a rival is your biggest mistake."
Switching between Music and Low-latency Game Mode for an optimized experience.
Maintenance
- Use a soft and dry cloth to wipe the device.
- Use a brush or other suitable tools to remove earwax or dirt from the earpiece.
- Clean the battery contacts with a dry cloth.
- Do not use chemicals or cleaning agents, as they may discolor or corrode the equipment.
- Prevent the equipment from contact with dust, sweat, ink, oil, and chemical products (cosmetics, antibacterial sprays, hand sanitizers, detergents, insecticides). If contact occurs, wipe immediately with a soft, lint-free cloth.
- Keep the equipment dry. Moisture and liquid can damage parts or circuits.
- Do not turn on the device when it is wet. If it turns on, turn it off immediately (if possible), dry with a towel, and contact a service center.
Troubleshooting
- Earbuds not connecting to app: If the MOONDROP app cannot find the earbuds, ensure they are first successfully paired via your device's standard Bluetooth settings.
- One earbud quiet or disconnected: Place both earbuds back into the charging case, then take them out again to re-establish connection.
- Difficulty pairing: Ensure the earbuds are fully charged. Try restoring factory settings (press and hold touch area for 8 seconds) and then re-attempt pairing.
- Sound quality issues: Adjust the equalizer settings within the MOONDROP app to customize the sound to your preference. Community EQ settings are also available.
Specifications
| Feature | Detail |
|---|---|
| Product Name | H.I.D.E.404_Klukai |
| Model | MD-TWS-043 |
| Bluetooth Version | 6.0 |
| Codec | SBC/AAC/LDAC™ |
| Distribution Profile | A2DP/AVRCP/HFP/HSP |
| Bluetooth Range | 10 Meters (Open Environment) |
| Earphone Battery Capacity | 3.7V/35mAh |
| Charging Case Battery Capacity | 3.7V/380mAh |
| Earphone Battery Life (AAC) | About 7 Hours |
| Charging Case Battery Life (AAC) | About 24 Hours |
| Input | 5V──1A |
| Output | 5V──0.25A |
⚠ Please use a charger with an output of 5V=1A that matches the device's input requirements.
Hazardous Substances
The following table details the presence of hazardous substances in the product components, in accordance with SJ/T 11364 and GB/T 26572-2011.
| Name | Hazardous substances and elements | |||||
|---|---|---|---|---|---|---|
| Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent chromium (Cr(VI)) | Polybrominated biphenyls (PBB) | Polybrominated diphenyl ethers (PBDE) | |
| Circuit components | X | O | O | O | O | O |
| Metal parts | O | O | O | O | O | O |
| Plastic parts | O | O | O | O | O | O |
| Speaker | O | O | O | O | O | O |
| Battery | X | O | O | O | O | O |
| Annex | X | O | O | O | O | O |
O: Indicates that the amount of the hazardous substance in all homogeneous materials of the part is below the limit requirement specified in GB/T 26572-2011.
X: Indicates that the content of the hazardous substance in at least one of the homogeneous materials of the part exceeds the limit requirement specified in GB/T 26572-2011, and there is currently no mature alternative in the industry. Please handle such parts or substances properly to avoid impact on the environment and human.
Safety Instructions
Please read these important security instructions carefully before using the equipment. This information contains general safety guidelines applicable to this device. Follow all warnings and cautions to prevent injury to yourself or others, or damage to your equipment.
General Warnings
- Failure to comply with safety warnings and regulations may result in serious injury or death.
- Do not use a damaged power cord or plug, or a loose power socket. Unsafe connections can cause electric leakage or fire.
- Do not use wet hands or other wet body parts to touch the device, power cord, plug, or power socket, as this may cause electric shock.
- When unplugging the power cord, do not use excessive force, as this may cause electric shock or fire.
- Do not bend or damage the power cord, as this may cause electric leakage or fire.
- Do not operate the device with wet hands while it is charging, as this may cause electric shock.
- Do not directly connect the positive and negative terminals of the charger together, as this may cause a fire or serious injury.
- Do not use the device outdoors during a thunderstorm, as this may cause electric shock or equipment failure.
- Only use batteries, chargers, accessories, and supplies approved by MOONDROP. Using unapproved items may shorten battery life, cause malfunction, fire, or explosion.
- Do not put the device in your back pocket or hang it on your waist. Excessive force may damage the device, cause it to explode, or cause fire. If you are hit or fall, you may be injured.
- Do not drop the device or subject it to strong impact. Otherwise, it may damage the device or battery, causing it to fail or shorten its life.
- Do not throw the battery or device into fire.
- Do not place batteries or devices in or on heating devices (e.g., microwave ovens, ovens, radiators). The device may explode if overheated.
- When disposing of used batteries or devices, comply with local regulations.
- Do not squeeze or pierce the device.
- Do not subject the device to external high voltage, as this may cause internal short circuit and overheating.
- Avoid exposing the device and battery to extremely cold or extremely hot temperatures. Extreme temperatures can damage the device, reduce charging capacity, and shorten service life.
- Do not use a data cable with peeled or damaged skin, or a charger that is damaged or not working properly.
- Do not store the device near water heaters, microwave ovens, hot cooking equipment, or high-pressure containers. The battery may leak, and the equipment may overheat and cause a fire.
- Do not use or store the device in areas where dust or aeolian materials are concentrated. Dust or foreign objects may cause device damage, fire, or electric shock.
- Prevent the charger socket and the smaller end of the charger from contacting conductive materials such as liquid, dust, metal powder, or pencil lead. Conductive materials may short-circuit or corrode contacts, causing explosion or fire.
- Do not touch the charger socket with sharp tools or bump it.
- When using a wireless charger, do not place metal objects, magnets, and magnetic stripe cards between the device and the wireless charger. The device may not charge properly or may overheat.
- Do not bite or suck the device or battery. Otherwise, it may damage the equipment or cause an explosion or fire.
- Children or animals can suffocate by swallowing small parts. When children use this device, ensure they use it correctly.
- Do not poke the device or its accessories into your eyes, ears, or mouth, as this may cause suffocation or serious injury.
- Do not use damaged or leaking batteries. For safe disposal, contact the nearest authorized service center.
- The device and some accessories contain magnets. Magnets may affect implantable pacemakers, heart rhythm converters, defibrillators, insulin pumps, or other electronic medical devices within 15 cm. If you use any of these medical devices, consult a doctor before using this device and its accessories.
- Do not use the device near other electronic devices, as it may interfere with them. Equipment with speakers is particularly susceptible to interference.
- Do not use your device in places that may be interfered with by radio frequency, such as hospitals, airplanes, or cars.
- If possible, use the device beyond 37cm of a pacemaker to avoid interference. To minimize interference, use the device on the side opposite to the pacemaker.
- If you use medical equipment, contact the manufacturer to determine if it will be affected by the radio frequency emitted by this device.
- During air flight, electronic equipment may interfere with the airplane's electronic navigator. Follow airline regulations and crew instructions. If allowed, always use flight mode.
- Electronic equipment in cars may malfunction due to radio interference. Contact the car manufacturer for details.
- Do not place the device in a place with dense smoke or fog. Otherwise, the surface may be damaged or the device may malfunction.
- If you use hearing aids and cochlear implants, contact the manufacturer for information about radio interference.
- Do not use the device near radio frequency devices or instruments (e.g., audio systems, radio antenna towers). Radio frequency may cause device malfunction.
- Turn off the device in a potentially explosive environment. Always operate in accordance with regulations, instructions, and signs in an explosive environment.
- Do not use the equipment in gas stations or near flammable materials, chemical agents, and explosive areas.
- Do not store or carry flammable liquids, gases, or explosive materials in boxes containing the device or accessories.
- If any part of the device is damaged, smokes, or smells of burning, stop using it immediately. The equipment cannot be reused until repaired by a MOONDROP Service Center.
- Broken glass may hurt your hands and face.
- If the device emits smoke or the smell of burning, the battery may explode or burn.
- Observe all safety warnings and regulations regarding the use of equipment while driving. Driving safely is your primary responsibility. If prohibited by law, do not use the device while driving.
- Place the equipment in an easy-to-access location. Do not look away from the road to get the wireless device.
- To avoid danger, pause calls in traffic jams or bad weather (rain, sleet, snow, ice).
- Do not record voice memos while driving, as this prevents focusing on safe driving.
- According to traffic situations, decide whether to answer calls reasonably. Answer calls when not moving or in traffic jams. Call after parking.
- Do not engage in nervous or excited conversations to avoid distraction. Let the caller know you are driving.
- Do not paint or paste paper on the equipment. If you are allergic to the paint or metal parts, it may cause itching, eczema, or swelling. Stop use and consult a doctor.
- Install the device cautiously. Do not place equipment and accessories in or near the airbag deployment area. Improper placement can cause serious injury if the airbag inflates.
- Do not drop the device or cause collision. It may be damaged or malfunction.
- If the device is bent or deformed, it may damage the equipment or cause parts malfunction.
- If the battery is not used for a long time, it may malfunction and must be recharged before use.
- When the equipment is not in use, disconnect the power supply.
- The battery can only be used for its designated purpose.
- Do not disassemble, modify, or repair the equipment. Any changes will void the manufacturer's guarantee. For repairs, contact a MOONDROP authorized dealer.
- Do not disassemble or pierce the equipment, as this may cause an explosion or fire.
- Do not disassemble or reuse the battery.
- Do not use the device for any purpose other than its designated purpose. The device may malfunction.
- Avoid disturbing others when using the device in public places.
- Only qualified personnel are allowed to repair the device. If repaired by unqualified personnel, the equipment may be damaged and the warranty will not be provided.
- Do not distribute copyrighted content without permission. The manufacturer is not responsible for legal problems caused by illegal actions against copyrighted content.
- Third-party content and services are provided without express or implied guarantees from MOONDROP. MOONDROP is not responsible for accuracy, validity, timeliness, legality, or completeness.
- Third-party services may be stopped or interrupted at any time. MOONDROP is not responsible for content or service availability.
- MOONDROP does not assume responsibility for any interruption or delay of content or service. Service requirements related to content or services should be directly borne by the content and service providers.
User Tips
- EQ Customization: For optimal sound quality, utilize the MOONDROP app to adjust equalizer (EQ) settings. The app also allows downloading community-created EQ profiles.
- App Connectivity: If the MOONDROP app struggles to find the earbuds, ensure they are first successfully paired via your device's standard Bluetooth settings.
- In-Game Item Redemption: Be aware that redemption of virtual items (e.g., avatar frames) for Girls' Frontline 2 may be restricted to specific regions (e.g., mainland China accounts). Non-mainland China accounts might not be able to claim these items.
Warranty and Support
The manufacturer will not provide warranty for damage or poor performance caused by failure to follow the warnings and instructions in this manual. The equipment may wear out over time. Although some parts and repairs are guaranteed during the validity period, damage or deformation caused by the use of unapproved accessories is not covered by the warranty.
For repairs or support, please contact your local MOONDROP authorized dealer or the MOONDROP Service Center.
A detailed user manual in PDF format is also available for download: View User Manual (PDF)