BASEUS 4-in-1 Car Jump Starter with Air Compressor

Contents

BASEUS 4-in-1 Car Jump Starter with Air Compressor User Manual

Model: 4-in-1 Car Jump Starter with Air Compressor

1. Introduction

Thank you for choosing the BASEUS 4-in-1 Car Jump Starter with Air Compressor. This versatile device combines an emergency jump starter, a tire inflator, a power bank, and an LED emergency light, providing a comprehensive solution for common roadside emergencies and daily needs. Please read this manual thoroughly before use to ensure safe and optimal operation.

2. Safety Information

WARNING:

  • Mind potential fire risk and strictly follow the instruction manual for charging and storage.
  • Keep away from ignition sources and ensure adequate ventilation during use and charging.
  • For disposal, check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with applicable legal requirements.
  • Do not disassemble the device. Refer servicing to qualified personnel.
  • Do not expose the device to extreme temperatures or direct sunlight for prolonged periods.
  • Ensure correct polarity when connecting to a car battery to avoid damage to the device or vehicle.

3. Package Contents

Please check the package for the following items:

  • BASEUS 4-in-1 Car Jump Starter Unit
  • Smart Jump Starter Clamps (Red for Positive, Black for Negative)
  • Air Inflation Hose
  • Various Inflation Nozzles (for car tires, bicycle tires, balls, etc.)
  • USB-C Charging Cable
  • Storage Pouch
  • User Manual (this document)
The 4-in-1 Jump Starter with all included accessories: jump cables, inflation hose, various nozzles, USB-C charging cable, and storage pouch.

Image: All included accessories with the main unit.

4. Setup

4.1 Charging the Device

Before first use, fully charge the jump starter. Use the provided USB-C cable and connect it to a compatible USB power adapter (not included). The digital display will indicate the charging status. A full charge ensures maximum performance.

4.2 Understanding the Display and Controls

The device features a digital display that shows battery level, tire pressure, and operational modes. Control buttons allow you to power on/off, switch modes, adjust pressure, and activate the light.

Diagram illustrating the 'All-in-One Solution' features: 1500mAh*4 Capacity, Power Bank, Wireless Inflation, Digital Display, Tire Pressure Monitor, Emergency Start, Emergency Light.

Image: Overview of device features and functions.

5. Operating Instructions

5.1 Jump Starter Function

Use this function to start a vehicle with a dead battery.

  1. Ensure the jump starter is sufficiently charged (at least 50% recommended).
  2. Connect the smart jump starter clamps to the device's output port.
  3. Open your vehicle's hood.
  4. Connect the RED (+) clamp to the positive terminal of your car battery.
  5. Connect the BLACK (-) clamp to the negative terminal of your car battery or a solid metal part of the engine block (ground).
  6. Ensure the clamps are securely attached and there is no corrosion. The smart clamps will indicate readiness (e.g., a green light).
  7. Return to your vehicle and start the engine.
  8. Once the engine starts, immediately disconnect the BLACK (-) clamp first, then the RED (+) clamp from the car battery.
  9. Disconnect the clamps from the jump starter unit.
4 In 1 Jump Starter connected to a car battery with clamps.

Image: Jump starter connected to a car battery.

A hand connecting the red clamp of the jump starter to the positive terminal of a car battery.

Image: Connecting the red clamp to the positive terminal.

Video: Demonstration of the jump start process.

5.2 Tire Inflator Function

Use this function to inflate car tires, bicycle tires, balls, and other inflatables.

  1. Connect the inflation hose to the device's air output port.
  2. Attach the appropriate nozzle to the hose and then to the item you wish to inflate (e.g., tire valve).
  3. Power on the device. The display will show the current pressure.
  4. Use the mode button to select the desired unit (PSI, BAR, KPA, kg/cm²) and the +/- buttons to set the target pressure.
  5. Press the start button to begin inflation. The device will automatically stop once the preset pressure is reached.
  6. Disconnect the hose and nozzle.
Device inflating a car tire, showing auto-stop and accurate monitoring features.

Image: Device inflating a car tire with smart inflation features.

A person holding the device while it inflates a car tire, showing the digital display.

Image: User operating the device to inflate a tire.

5.3 Power Bank Function

Use this function to charge your mobile devices.

  1. Connect your device's USB charging cable to the USB output port on the jump starter.
  2. The jump starter will automatically begin charging your device.
  3. Monitor your device's charging status.
Device used as a bright LED flashlight under a car hood and charging a phone.

Image: Device charging a mobile phone.

5.4 LED Lighting Function

The device includes a powerful LED light for various situations.

  1. Press and hold the light button to turn on the flashlight.
  2. Press the light button again to cycle through different modes: constant light, SOS signal, and strobe light.
  3. Press and hold the light button again to turn off the light.
Collage showing zero voltage start, fast inflation, 3-mode emergency light, and anti-reverse smart clamps with 12 safety protections.

Image: Device showing 3-mode emergency light.

6. Maintenance

  • Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Ensure it is fully charged before long-term storage and recharge every 3-6 months to maintain battery health.
  • Battery Care: Avoid fully discharging the battery frequently. Recharge the device promptly after use.

7. Troubleshooting

  • Device not turning on: Ensure the device is charged. If not, connect it to a power source and charge it.
  • Vehicle not starting: Check that the clamps are securely connected to the correct battery terminals. Ensure the jump starter has sufficient charge. If the vehicle still doesn't start after a few attempts, there might be a larger issue with the vehicle's battery or starter motor.
  • Tire not inflating: Check that the inflation hose is securely connected to both the device and the tire valve. Ensure the nozzle is appropriate for the item being inflated. Verify the target pressure is set correctly.
  • Device not charging: Check the USB-C cable and power adapter. Try a different cable or adapter.

8. Specifications

FeatureSpecification
Peak Current600 A
Voltage12 V
Battery Cell Capacity6000 mAh (1500mAh x 4 cells)
Rated Output Capacity3700 mAh
Item Weight670g
Input5V/2A
OutputUSB 5V/2.4A
Rated Power88W
Suit for12V 2.0L Diesel Vehicles / Gasoline Vehicles
CertificationsCE, FCC, RoHS
Internal view of the device highlighting its powerful core with multi-protection, AI smart chip, and 4x 1500mAh cells.

Image: Internal battery configuration.

9. User Tips

  • Ease of Use: Users appreciate the fast power-on speed and straightforward operation for both jump-starting and tire inflation.
  • Multi-functionality: The ability to jump-start, inflate tires, and charge devices makes it a highly recommended tool for vehicle owners.
  • Pre-charge: Always ensure the device is adequately charged before heading out, especially if you anticipate needing its functions.
  • Battery Capacity Clarification: The device contains 4 internal cells of 1500mAh each, totaling 6000mAh cell capacity. The rated output capacity for practical use is 3700mAh.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official BASEUS website or contact your retailer. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.