1. Introduction
Thank you for choosing the VBTER VBT-55 Walkie Talkie. This professional FM transceiver is designed for reliable long-distance communication with features like Type-C charging, long standby time, and anti-interference capabilities. This manual provides detailed instructions for proper setup, operation, and maintenance of your device.

2. Package Contents
Please check the package for the following items:
- 2 x VBTER VBT-55 Walkie Talkie Units
- 2 x Type-C Charging Cables
- 2 x 1800mAh Li-ion Batteries
- 2 x Antennas
- 2 x Belt Clips / Lanyards

3. Getting Familiar with Your Radio
Familiarize yourself with the parts and controls of your VBT-55 walkie talkie:
- Antenna: For transmitting and receiving signals.
- Indicator Light: Turns red when transmitting, green when receiving, blinks red when battery is low.
- PTT Switch (Push-To-Talk): Press to transmit, release to receive.
- MONI Key (Monitor): Press to monitor signals on the current channel.
- Channel Knob: Rotate to select channels 1 to 16.
- Power/Volume Knob: Rotate clockwise to turn on/increase volume, counter-clockwise to turn off/decrease volume.
- Speaker: Audio output.
- Microphone: Audio input.
- Mic/Speaker Jack/Programming Port: For connecting headsets or programming cables.
- Li-ion Battery: Provides power to the radio.
4. Setup
4.1. Battery Installation
Ensure the radio is turned off. Align the battery with the back of the radio and slide it into place until it clicks securely. To remove, press the battery release latch (if present) and slide the battery off.
4.2. Charging the Battery
Your VBT-55 walkie talkie features convenient Type-C charging.
- Connect the Type-C charging cable to the charging port on the radio.
- Connect the other end of the cable to a compatible USB power source (e.g., wall adapter, power bank, car charger, computer USB port).
- The indicator light may show charging status (refer to specific light behavior in the Basic Operation section).
- Charge the battery fully before first use for optimal performance.

5. Operating Your Radio
5.1. Basic Operation
- Power On/Off & Volume Adjustment: Rotate the Power/Volume Knob clockwise to turn on the radio and increase volume. Rotate counter-clockwise to decrease volume and turn off the radio.
- Channel Selection: Rotate the Channel Knob to select channels 1 to 16. Clockwise increases the channel number, counter-clockwise decreases it.
- Transmitting (PTT Switch): Press the PTT switch and speak into the microphone. The indicator light will turn red. If the channel has no transmitting frequency, a "DU DU" tone will sound. Release PTT to receive.
- Monitoring (MONI Key): Press the MONI key to listen to signals on the current frequency, even if the signal strength is below the squelch threshold.
5.2. Advanced Features
- Squelch Level: Determines the signal strength required to open the speaker. Lower levels increase range but also background noise. Default is 5. Adjustable via programming software (levels 0-9).
- TOT (Time-Out Timer): Prevents continuous transmission on a channel for too long. If transmission exceeds the pre-set time, the radio will sound "DU" and stop transmitting. Release PTT to reset.
- Scan: When the current channel is 16, the radio automatically scans defined channels. It stops on a channel with a signal for communication.
- VOX (Voice Operated Transmit): Allows hands-free transmission by speaking into the microphone without pressing PTT. Adjustable via programming software.
- Scrambler: Encrypts your communications for privacy. Can be turned on/off via programming software for each channel.
- CTCSS/DCS (Continuous Tone-Coded Squelch System / Digital Coded Squelch): Sets sub-audible tones to filter out unwanted conversations. Your radio will only open its squelch when receiving a signal with the same CTCSS/DCS tone.
- One-Key Frequency Copy (Optional): This feature allows you to quickly copy frequencies from another radio. Refer to the detailed instructions in the original manual for specific steps (requires "PLUS" label).
- Frequency Copy (Optional): Allows copying all channels simultaneously from another radio (requires "PLUS" label).



6. Maintenance
- Cleaning: Use a soft, damp cloth to clean the radio's surface. Do not use harsh chemicals or abrasive cleaners.
- Battery Care: Avoid overcharging or completely draining the battery. Store the radio and battery in a cool, dry place when not in use for extended periods.
- Antenna: Do not bend or modify the antenna, as this can affect performance.
- Water Resistance: While suitable for daily use, the VBT-55 is not waterproof. Avoid submerging it in water.

7. Troubleshooting
- Low Battery Alert: If the battery voltage drops below a certain level, the radio will emit a "DuDu" sound every 15 seconds (or prompt "please charge" if voice prompt is enabled). Transmission will be invalid. Recharge the battery immediately.
- Busy Channel Lock: If this feature is enabled and you try to transmit on a busy channel, the radio will emit a "Di" sound and prevent transmission. Wait for the channel to clear before transmitting.
- No Transmission/Reception: Check battery level, ensure you are on the correct channel, and verify antenna is securely attached.
8. Specifications
| Category | Specification |
|---|---|
| Brand Name | VBTER |
| Model Number | VBT-55 |
| Frequency Range | 400-470MHz (UHF) / 446MHz |
| Storage Channel | 16 |
| Output Power | 3W-5W |
| Battery Capacity | 1800mAh Li-ion |
| Working Voltage | 3.7V |
| Maximum Range | 3km-5km |
| Dimensions | 11.9 x 5.4 x 2.9 cm |
| Material | Plastic |
| Waterproof / Water-Resistant | No |
| Is_Display | No |
| Origin | Mainland China |
| Certification | CE, FCC, RoHS |
9. User Tips
- For optimal range, ensure the antenna is fully extended and you have a clear line of sight.
- Always fully charge the battery before extended use, especially for outdoor activities.
- Experiment with squelch levels in different environments to find the best balance between clear audio and range.
10. Warranty and Support
This warranty card is applicable only to the VBTER VBT-55 two-way radio with the above-listed model and serial number. It is an important document for the end-user to enjoy warranty service; please keep it well. The warranty card must be completed by the dealer and stamped with the sales stamp to take effect.
For support or warranty claims, please contact your dealer with the completed warranty card and proof of purchase.