1. Introduction
This manual provides instructions for the ATA PTX4 433.92MHz Rolling Code Remote Control, designed for use with compatible garage door openers. This remote is a replacement for and compatible with original ATA PTX-4, SecuraCode CRX-1, CRX-2, GDO-2v5, GDO-2v6, and GDO-2v7 models.


2. Safety & Warnings
WARNING: TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES, OR PLAY PENS. THIS BAG IS NOT A TOY.
3. Setup (Programming Instructions)
To program your new ATA PTX4 remote control, follow these steps:
- Locate the 'Learn / Code Set' button on your garage door motor. This button is typically found under the lamp cover or on the back of the motor unit.
- Press the 'Learn / Code Set' button once, then release it. A light on the motor unit should illuminate.
- Press the desired transmitter button on your new remote control once. The light on the motor unit will go out.
- Press the same button on your remote control again. The light on the motor unit will flash and then go out, indicating that the remote has been successfully coded.
- Test the operation of the remote control by pressing the programmed button.

4. Operating Instructions
Once programmed, simply press the corresponding button on your ATA PTX4 remote control to operate your garage door opener.

5. Maintenance
The remote control is powered by a battery. If the remote's indicator light does not illuminate or its range decreases significantly, the battery may need to be replaced. To replace the battery, carefully open the remote control casing, typically by unscrewing small screws on the back. Replace the old battery with a new one of the same type (e.g., CR2032, not specified in provided data, please check your remote for exact type) ensuring correct polarity, then reassemble the remote.

6. Troubleshooting
- Remote not working after programming: Ensure the 'Learn / Code Set' button sequence was followed correctly. Try reprogramming the remote.
- Reduced operating range: Check the remote's battery and replace if necessary. Ensure there are no obstructions between the remote and the garage door opener's receiver.
- Incompatibility issues: Verify that your garage door opener is compatible with the ATA PTX4 remote (433.92MHz rolling code). This remote is not compatible with ATA PTX5 series.

7. Specifications
| Feature | Specification |
|---|---|
| Product Name | Garage Door Remote Control |
| Model | RMTPS |
| Encoding Method | Rolling code |
| Frequency | 433.92MHz |
| Dimensions (L x W x T) | 7cm x 3cm x 1.2cm |
| Weight | 0.056 kg |
| Origin | Mainland China |
8. User Tips
No specific user tips were available from the provided reviews or Q&A. However, general tips for remote controls include:
- Keep the remote in a safe, easily accessible place, such as on a keychain or in your vehicle.
- Avoid exposing the remote to extreme temperatures or moisture.
- If you have multiple garage doors, ensure each remote button is programmed to the correct door.
9. Warranty & Support
For support or warranty inquiries, please contact the manufacturer or their representative:
- Manufacturer: Shenzhen ruimengda trading co., ltd
- Address: Room 201e, building c6, hengfeng industrial city, no. 739 shishi road, hezhou community, hangcheng street, baoan district, shenzhen city, guangdong province, China
- Responsible Person: Chen Ling
- Telephone: 18322929060
- Email: gateoffice777@163.com
- EU Representative: APEX CE SPECIALISTS
- EU Representative Address: 64 Rue Waldeck-Rousseau 69006, Lyon RHONE/LYON
- EU Contact Information: 780752086
A PDF version of the user manual is also available for download: User Manual (PDF)