1. Product Overview
This product is a 9-inch quadlock car Android radio frame designed to facilitate the installation of an aftermarket Android head unit into the dashboard of compatible vehicles. It includes the necessary frame, a 16-pin wiring harness, and a CANbus box for seamless integration.
Compatibility: Specifically designed for Zhonghua Brilliance H220 and H230 models from the 2012 model year.
Note: The Android head unit (stereo) is not included with this product. This package provides the frame and wiring components only.
2. Package Contents
Please verify that all items are present and in good condition upon unpacking:
- 9-inch Radio Frame (Fascia)
- 16-pin Wiring Harness
- CANbus Box
Figure 2.1: 9-inch Radio Frame with 16-pin Harness and Canbus Box
Figure 2.2: 9-inch Radio Frame (Fascia) Only
3. Installation Guide
3.1 Pre-Installation Checks
- Ensure your aftermarket Android head unit uses a standard 16-pin connector. This harness is designed for such units.
- Confirm your vehicle is a Zhonghua Brilliance H220 or H230 (2012 model year).
- Disconnect the vehicle's battery before starting any electrical work.
3.2 Removing the Original Stereo
Carefully remove the original car stereo and its surrounding fascia. Refer to your vehicle's service manual for specific instructions on dashboard disassembly.
Figure 3.1: Dashboard Before and After Installation
3.3 Wiring Connections
- Connect the 16-pin wiring harness to your Android head unit. The harness is designed to match the standard pin definition for car audio and navigation systems.
- Connect the other end of the wiring harness to the vehicle's original wiring, ensuring a plug-and-play connection without cutting any wires.
- Plug the 8-pin CANbus plug into the designated socket on the back of your Android head unit. Refer to the diagram below for visual guidance.
Figure 3.2: 16-pin Connector and CANbus Wiring Diagram with Pin Assignments and CANbus Settings
3.4 Installing the Frame and Head Unit
- Mount your Android head unit into the new 9-inch radio frame.
- Carefully insert the assembled head unit and frame into the dashboard opening, ensuring all clips and mounting points align.
- Secure the frame and head unit in place.
3.5 CANbus Settings on Android Stereo
After physical installation, you must configure the CANbus settings on your Android head unit:
- Enter the Android head unit's settings menu.
- Navigate to 'Factory Settings'. You may need a password (common passwords are 1260 or 123456; if these do not work, please contact the seller for the correct password).
- Within Factory Settings, select 'Models'.
- Choose the correct CANbus Brand and Car Model Year Version for your vehicle (Brilliance H220/H230 2012).
- Save the settings and reboot the head unit. It is recommended to update to the latest MCU (Microcontroller Unit) firmware if prompted or available.
4. Operating Instructions
This product is an installation frame and wiring kit. For detailed operating instructions of your Android head unit, please refer to the user manual provided with your specific head unit model. The frame and harness enable the head unit's functions, including steering wheel controls and other vehicle-specific features, through the CANbus system once correctly configured.
5. Maintenance
To ensure the longevity and appearance of your radio frame:
- Clean the frame regularly with a soft, damp cloth.
- Avoid using abrasive cleaners or harsh chemicals, as these can damage the plastic finish.
- Ensure no liquids seep into the gaps around the head unit.
6. Troubleshooting
6.1 Common Issues and Solutions
-
Head Unit Not Powering On:
- Check all wiring connections, especially the 16-pin harness, to ensure they are securely seated.
- Verify the vehicle's battery is reconnected and fully charged.
- Inspect vehicle fuses related to the stereo system.
-
Steering Wheel Controls Not Working:
- Ensure the 8-pin CANbus plug is correctly connected to the head unit.
- Re-check the CANbus settings in the Android head unit's factory settings (Section 3.5). Make sure the correct CANbus brand and car model are selected.
- Consider updating the head unit's MCU firmware if available.
-
Sound Issues (No Sound, Distorted Sound):
- Verify all speaker wire connections on the 16-pin harness.
- Check the audio settings on your Android head unit.
-
Compatibility Problems:
- While this product is designed for broad compatibility with aftermarket Android head units, minor variations can occur. If you encounter persistent compatibility issues, please contact the seller for assistance.
If you experience any problems during installation or operation that cannot be resolved with the above steps, please do not hesitate to contact the seller for support.
7. Specifications
| Feature | Specification |
|---|---|
| Product Type | Car Android Radio Frame (Fascia) with Harness & CANbus |
| Screen Size Compatibility | 9 inch |
| Vehicle Compatibility | Zhonghua Brilliance H220, H230 (2012 Model Year) |
| Material | Environment-friendly ABS Plastic |
| Design | 1:1 model design with original car radio installation part |
| Wiring Harness | 16-pin connector, ISO wiring harness standard |
| External Testing Certification | ROHS |
| Package Dimensions (L x W x H) | 35 cm x 18 cm x 13 cm |
| Package Weight | 0.5 kg |
8. User Tips
- Always double-check the 16-pin connector type of your Android head unit before purchasing to ensure compatibility with the provided harness.
- When setting up the CANbus, if the default passwords (1260 or 123456) for factory settings do not work, contact the seller for the correct code.
- For vehicles not explicitly listed as compatible, it is crucial to contact the seller to confirm fitment before purchase.
Figure 8.1: Contact Seller for Additional Model Compatibility
9. Warranty and Support
For any questions, technical support, or warranty claims regarding this product, please contact the seller directly through the platform where you made your purchase. The seller specializes in Android Car Multimedia System Devices and is equipped to assist with installation and compatibility inquiries.
An additional user manual in PDF format is available for download, which may contain further details. You can access it via the following link: User Manual (PDF).