QCY Melobuds N20

Contents

QCY Melobuds N20 ANC Wireless Earbuds

User Manual

1. Product Overview

The QCY Melobuds N20 are advanced ANC (Active Noise Cancelling) wireless earbuds designed for an immersive audio experience. They feature adaptive noise cancellation, multiple microphones for clear calls, Bluetooth 6.0 connectivity, and extended battery life.

QCY Melobuds N20 Earbuds and Charging Case

Figure 1: QCY Melobuds N20 Earbuds and Charging Case

2. Setup

2.1. App Download

Enhance your experience by downloading the QCY app. The app allows for custom touch control settings, EQ adjustments, and firmware updates.

  1. Open your mobile browser.
  2. Scan the QR code below to download the QCY app.
QR Code for QCY App Download

Figure 2: QR Code for QCY App Download

2.2. First Time Connection (Pairing)

Follow these steps to connect your QCY Melobuds N20 to your device for the first time:

  1. Activate Earbuds: Remove both earbuds from the charging case. Locate and tear off the protective film from the charging contacts. Place the earbuds back into the case and close the lid.
  2. Prepare for Pairing: Open the charging case lid and take the earbuds out again. They will automatically enter pairing mode.
  3. Connect to Device: On your device (smartphone, tablet, etc.), go to Bluetooth settings. Refresh the list of available Bluetooth devices and select "QCY MeloBuds N20" to connect.

Note: The earbuds are designed to power on automatically when the charging case lid is opened. If they do not power on, please recharge them and retry the connection process.

Diagram showing steps for first-time earbud pairing

Figure 3: First-Time Pairing Process

2.3. How to Fit the Earbuds

Proper fit is crucial for optimal sound quality and noise cancellation.

  1. Choose Ear Tips: Select the ear tips that best fit your ears for comfort and a secure seal.
  2. Identify Left/Right: Identify the left (L) and right (R) earbuds.
  3. Insert and Adjust: Gently insert each earbud into the corresponding ear canal. Rotate the earbuds slightly until the microphones are pointing towards your mouth and you find the most comfortable and secure position.

Note: If the earbuds are not worn correctly, it may affect sound quality, noise cancellation performance, and overall listening experience.

Diagram showing correct earbud fitting

Figure 4: Correct Earbud Fitting

2.4. Multipoint Connection

The QCY Melobuds N20 supports connecting to two devices simultaneously.

  1. Connect to First Device (Device A): Pair and connect the earbuds to your first device (e.g., smartphone) as described in the "First Time Connection" section.
  2. Enter Pairing Mode Again: Once connected to Device A, turn off Bluetooth on Device A. The earbuds will automatically re-enter pairing mode.
  3. Connect to Second Device (Device B): Turn on Bluetooth on your second device (e.g., laptop) and select "QCY MeloBuds N20" to connect.
  4. Reconnect to First Device: Turn Bluetooth back on for Device A. The earbuds should automatically reconnect to Device A.

Your earbuds are now connected to both Device A and Device B simultaneously, allowing seamless switching between audio sources.

Diagram showing multipoint connection to two devices

Figure 5: Multipoint Connection

2.5. Factory Reset

If you experience connection issues or other malfunctions, you can perform a factory reset.

  1. Remove from Case: Take both earbuds out of the charging case.
  2. Disconnect: Ensure the earbuds are disconnected from all previously paired devices.
  3. Perform Reset: Simultaneously touch and hold the touch panels on both earbuds 5 times. The LED indicator on both earbuds will blink white 5 times.
  4. Reset Complete: The reset process is complete once the blinking stops.

After a factory reset, you will need to pair the earbuds with your device again as if it were the first time connection.

Diagram showing factory reset by touching earbuds 5 times

Figure 6: Factory Reset Procedure

3. Operating Instructions

3.1. Power On/Off

  • Power On: Open the charging case lid and take out the earbuds. They will automatically power on. If the earbuds are powered off due to inactivity when outside the charging case, press and hold the touch panel on either earbud for 1.5 seconds to turn them on.
  • Power Off: Place the earbuds back into the charging case and close the lid. The earbuds will automatically power off.
Diagram showing power on/off states of earbuds

Figure 7: Power On/Off States

3.2. Touch Controls

The QCY Melobuds N20 features intuitive touch controls on both earbuds.

FunctionAction (Left Earbud)Action (Right Earbud)
Play/PauseDouble-tap (x2)Double-tap (x2)
Previous TrackTriple-tap (x3)N/A
Next TrackN/ATriple-tap (x3)
Answer/End CallDouble-tap (x2)Double-tap (x2)
Reject CallPress and hold for 1.5sPress and hold for 1.5s
Activate Voice AssistantPress and hold for 1.5sN/A
Cycle ANC Modes (Noise Reduction, Transparency, Normal)N/APress and hold for 1.5s
Diagram of earbud touch controls

Figure 8: Earbud Touch Controls

3.3. Indicator Behavior

The LED indicators on the earbuds and charging case provide status information.

StatusEarbud IndicatorCharging Case Indicator
Earbuds ChargingRed light stays onN/A
Earbuds Fully ChargedWhite light stays on for 10s, then turns offN/A
Charging Case ChargingN/AWhite light blinks
Charging Case Fully ChargedN/AWhite light stays on
Diagram of LED indicator behavior for earbuds and case

Figure 9: LED Indicator Behavior

4. Maintenance

To ensure the longevity and optimal performance of your QCY Melobuds N20 earbuds, follow these maintenance guidelines:

  • Cleaning: Regularly clean the earbuds, ear tips, and charging contacts with a soft, dry, lint-free cloth. Do not use abrasive materials, alcohol, or other chemical cleaners.
  • Storage: When not in use, store the earbuds in their charging case to protect them from dust, moisture, and physical damage.
  • Charging: Always use a charger produced by a legitimate manufacturer and certified by national safety authorities (Min 2W, Max 5W). Avoid overcharging or completely draining the battery for extended periods.
  • Temperature: Do not expose the product to extremely low (below 0°C) or high (above 45°C) temperatures.
  • Moisture: While the earbuds have an IPX4 rating (sweat/water resistance), avoid submerging them in water or exposing them to heavy rain. Dry them thoroughly if they get wet.

5. Troubleshooting

If you encounter any issues with your QCY Melobuds N20, refer to the solutions below:

  • Earbuds Cannot Pair with Mobile Phone:
    1. Ensure the earbuds are in pairing mode (LED blinking).
    2. Check if Bluetooth is enabled on your mobile phone.
    3. Go to your phone's Bluetooth settings, forget/delete "QCY MeloBuds N20" from the list of paired devices.
    4. Restart your phone's Bluetooth or restart the phone itself.
    5. Retry the pairing process from the "First Time Connection" section.
  • Connection is Not Stable or Cuts Out Intermittently:
    1. Ensure there are no physical obstructions (like walls or metal objects) between your device and the earbuds.
    2. Keep your device within the recommended Bluetooth range (typically 10 meters/33 feet) without significant interference.
    3. Avoid using the earbuds in environments with strong electromagnetic interference.
  • Only One Earphone Produces Sound:
    1. Place both earbuds back into the charging case and close the lid.
    2. Wait a few seconds, then take them out again.
    3. Check if both earbuds now produce sound. If not, perform a factory reset on both earbuds.
  • Delay in Video Watching or Game Playing:

    Audio delay can be influenced by environmental factors, network conditions, and the audio codec used by your mobile phone. While the earbuds feature a low-latency mode (0.068s), some delay might still be perceptible in certain situations.

  • Earphone Will Not Turn On:
    1. Ensure the earbuds and charging case have sufficient battery charge. Place them in the case and charge fully.
    2. If the earbuds still do not turn on after being fully charged, or if they do not charge at all, please contact customer support.

6. Specifications

FeatureSpecification
Model NameMelobuds N20
BrandQCY
Wireless TypeBluetooth 6.0
Active Noise Cancellation (ANC)Up to 56dB Adaptive ANC
Microphones6 Mics (for calls and ANC)
Driver Diameter13mm
Battery LifeUp to 40 Hours (with charging case)
Waterproof RatingIPX4 (Sweat/Water Resistant)
MaterialPC, ABS, Silica Gel
FeaturesActive Noise Cancelling, Dual Connection, Low-Latency Mode, Custom EQ
CertificationCE, FCC, RoHS, BQB
Wireless Frequency2.402~2.480GHz
RF Power of Transmission<4dBm
Earbud Dimensions (approx.)Not specified (typical in-ear size)
Case Dimensions (approx.)Length: 8cm, Width: 4cm, Height: 13cm
Total Weight (approx.)0.09 kg
Features: Dual Connection, Low-Latency, Bluetooth 6.0, IPX4 Rating

Figure 10: Key Features

Diagram showing -50dB Active Noise Canceling with 98% noise reduction

Figure 11: Active Noise Cancelling Technology

Adjustable Noise Canceling modes: Indoor, Crowd, Commute, Adaptive, Anti-Wind Noise, Transparent

Figure 12: Adjustable Noise Cancelling Modes

QCY App screenshot showing Preset and Custom EQ options

Figure 13: QCY App EQ Settings

7. User Tips

Based on user feedback, here are some tips to enhance your experience:

  • App Performance: Some users have reported occasional app crashes. Ensure your QCY app is updated to the latest version for the best performance.
  • Bass Quality: If you find the bass lacking, experiment with different ear tip sizes to ensure a perfect seal, which significantly impacts bass response. You can also adjust the EQ settings in the QCY app to boost bass frequencies.
  • Noise Cancellation: While many find the ANC excellent, its effectiveness can vary based on the type of noise and fit. Ensure a snug fit and try different ANC modes in the app to find what works best for your environment.
  • Battery Life: Users consistently praise the excellent battery life. To maximize it, always store earbuds in the charging case when not in use.

8. Warranty and Support

8.1. Warranty Information

  • Warranty Period: QCY products come with a 12-month warranty period from the date of delivery.
  • How to Solve Your Problem:
    • Online Purchase: For after-sales service, prioritize contacting the customer service of the platform where you made the purchase. QCY support will provide technical assistance.
    • Offline Purchase: Contact the store, distributor, or agent directly for assistance.
  • Valid Proof of Purchase: To claim warranty, provide your order number or information clearly showing the sales channel, product details, price, and sales date. For non-official channels, provide store information, order number, or product information evidence confirmed by the QCY service team.
  • Not Covered Under Warranty: The manufacturer's warranty does not cover: lost, stolen, or free products; items with expired warranty; products without sufficient proof of purchase; improper maintenance or modification; accident, misuse, abuse, contamination, or other external causes; use of unspecified adapters/accessories; malfunctions/damages from natural disasters, abnormal voltage, environmental factors; or damages resulting from failure to follow instructions.

8.2. Contact Details

For FAQs and more information, please email support@qcymall.com or visit the official website: www.qcy.com.

8.3. Regulatory Compliance (FCC/IC Statement)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

9. Safety Instructions

Please read and follow these safety instructions carefully to prevent damage to the product or injury to yourself:

  1. Carefully read and retain this user manual before using the product.
  2. If the product is not used for an extended period (more than 2 weeks), please recharge it.
  3. You must choose a charger produced by a legitimate manufacturer and certified by the national safety authority (Min 2W, Max 5W).
  4. If your phone cannot detect the product, either re-enter pairing mode or perform a factory reset on the product. If there is a phone program error, close and reopen Bluetooth on the phone or restart the phone.
  5. Do not disassemble or modify the battery, insert foreign objects, expose it to high temperatures, or immerse it in water or other liquids to prevent battery leakage, overheating, ignition, or explosion. Battery replacement should only be done by the manufacturer.
  6. Do not drop, crush, or puncture the battery. Prevent external pressure that may lead to internal short circuits and overheating.
  7. Do not dismantle or modify the product for any reason, as it may result in fire, electronic breakdown, or permanent damage to the product.
  8. Do not expose the product to extremely low (below 0°C) or high (above 45°C) temperatures.
  9. Do not direct the product indicator light near the eyes of children or animals.
  10. Do not use the product during thunderstorms, as it may cause abnormal operation and increase the risk of electric shock.
  11. Do not use oil or other volatile liquids to clean the product.
  12. Please do not use this device for long periods of time and at high volume, as there is a risk of hearing damage.

WARNING!

Prolonged exposure to loud noise can cause temporary or permanent hearing damage or hearing loss. As a consequence, avoid listening for long periods at high volume and keep the volume at an appropriate setting.

9.1. Disposal Information

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.