VGR V-640 S3

Contents

VGR V-640 S3 Professional Barber Combo

User Instruction Manual

Model: V-640 S3

Introduction

Thank you for choosing the VGR V-640 S3 Professional Barber Combo. This versatile 3-in-1 grooming kit includes a high-performance hair clipper, a precise hair trimmer, and an efficient foil shaver, designed to meet all your hair cutting and shaving needs. Please read this manual carefully before using the device to ensure safe and optimal operation.

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries.

Package Contents

Please check the box for the following items:

  • 1 x Hair Clipper
  • 1 x Hair Trimmer
  • 1 x Shaver
  • 6 x Hair Clipper Guide Combs (1.5mm, 3mm, 4.5mm, 6mm, 9mm, 12mm)
  • 3 x Hair Trimmer Guide Combs (1mm, 2mm, 3mm)
  • 2 x USB Charging Cables
  • 1 x Cleaning Brush
  • 1 x Instruction Manual
VGR V-640 S3 Professional Barber Combo with all included accessories

Image: VGR V-640 S3 Professional Barber Combo with all included accessories, including the hair clipper, hair trimmer, shaver, various guide combs, USB cables, cleaning brush, and instruction manual.

Product Features and Components

The VGR V-640 S3 is a comprehensive grooming solution. Familiarize yourself with its key components and features:

General Features:

  • Metal Body: Durable and powerful construction for long-lasting use.
  • USB Charging: Convenient charging via USB cable, compatible with various power sources.
  • ON/OFF Switch: Easy to operate for quick power control.
  • LED Display: Smart LED screen clearly shows battery status, speed settings, and usage alerts.
VGR V-640 S3 Function Overview

Image: Overview of VGR V-640 S3 functions, highlighting USB-C charging, ON/OFF switch, metal body, precision blades, and LED display.

Hair Clipper (V-640C):

  • Dual-Speed 9000 RPM Motor: Powerful performance for versatile cutting.
  • Blades: Ceramic and Powder Metallurgic Blades for fast and smooth cutting.
  • Taper Lever: Adjustable taper control for cutting lengths from 0.5mm to 2.5mm.
  • Battery: 2500mAh Lithium-ion battery, providing up to 250 minutes of runtime.
VGR V-640 S3 Hair Clipper Blade and Speed

Image: Close-up of the hair clipper blade, showing DLC coating fix blade and ceramic moving blade, with speed ranges of 7000/9000 RPM.

VGR V-640 S3 Hair Clipper Guide Combs

Image: Hair clipper showing adjustable cutting length from 0.5mm to 2.5mm, and various guide comb sizes (1.5mm, 3mm, 4.5mm, 6mm, 9mm, 12mm).

Hair Trimmer (V-640T):

  • Blades: Advanced DLC-Coated Blades for ultimate sharpness and durability.
  • Battery: 2000mAh rechargeable battery, providing up to 240 minutes of runtime.
VGR V-640 S3 Hair Trimmer Safety Blades

Image: Close-up of the hair trimmer blades, highlighting safety blades for fast, smooth, and precise ceramic moving blade trimming.

Shaver (V-640S):

  • Motor: 9000 RPM High-Speed Rotary Motor for efficient shaving.
  • Foil: Dual-Layer Black Titanium-Coated Foil for durability and a close shave.
  • Battery: 1200mAh rechargeable battery, providing up to 150 minutes of runtime.
VGR V-640 S3 Product Overview

Image: The VGR V-640 S3 Professional Barber Combo showing the hair clipper, hair shaver, and hair trimmer, all featuring a turbo mode with 9000 RPM.

Setup and Initial Use

1. Before First Use:

  • Remove all protective films from the device components (clipper, trimmer, shaver).

2. Charging:

  • Connect the provided USB cable to the charging port on the respective device (clipper, trimmer, or shaver).
  • Plug the other end of the USB cable into a certified 5V power adapter (not included).
  • The LED display will indicate charging status.
  • Charge the Hair Clipper for approximately 3 hours for a full charge.
  • Charge the Hair Trimmer for approximately 2.5 hours for a full charge.
  • Charge the Shaver for approximately 2 hours for a full charge.
  • Ensure the device is fully charged before its first use for optimal battery life.
VGR V-640 S3 Battery Life and Charging

Image: Diagram showing battery capacity, charging time, and running time for the hair trimmer (2000 mAh, 2.5 hours charging, 240 minutes running), hair clipper (2500 mAh, 3 hours charging, 250 minutes running), and shaver (1200 mAh, 2 hours charging, 150 minutes running).

Operating Instructions

General Operation:

  • Power On/Off: Press and hold the power button for 3 seconds to turn on or turn off the device.
  • Change Modes/Speeds: Short press the power button to cycle through available speed settings (if applicable) or modes. The LED display will show the current setting.

Using the Hair Clipper:

  1. Attach the desired guide comb (1.5mm, 3mm, 4.5mm, 6mm, 9mm, or 12mm) by aligning it with the blade and snapping it into place.
  2. Adjust the taper lever on the side of the clipper for fine-tuning cutting lengths between 0.5mm and 2.5mm. Push the lever forward for shorter hair, pull back for longer hair.
  3. Turn on the clipper.
  4. Begin cutting hair against the direction of hair growth for an even cut.
  5. For bulk cutting, use the higher speed setting (9000 RPM).
VGR V-640 S3 Hair Clipper Adjustable Lever

Image: Hair clipper showing the 5-position adjustable lever (1/1.5/2/2.5/3mm) for length adjustment. Lever forward for shorter hair, lever back for longer hair.

Using the Hair Trimmer:

  1. Attach the desired trimmer guide comb (1mm, 2mm, or 3mm) if needed for specific lengths, or use without a comb for close trimming and detailing.
  2. Turn on the trimmer.
  3. Use for outlining, detailing, beard trimming, and precise hair removal.

Using the Shaver:

  1. Ensure your skin is clean and dry for best results.
  2. Turn on the shaver.
  3. Gently press the shaver against your skin and move it in short, circular motions or against the direction of hair growth.
  4. The dual-layer foil is designed for a close and comfortable shave.

Video: A short demonstration showcasing the VGR V-640 S3 Professional Barber Combo, highlighting the hair clipper, trimmer, and shaver in action.

Maintenance and Care

Cleaning:

  • After each use, turn off the device and detach any guide combs.
  • Use the provided cleaning brush to remove hair clippings from the blades and the device body.
  • For a more thorough clean, the blades can be carefully removed (refer to specific blade removal instructions if provided in the full PDF manual) and rinsed under running water. Ensure blades are completely dry before reattaching.
  • Do not immerse the main body of the device in water.

Blade Care:

  • Regularly oil the blades with a few drops of clipper oil (not included due to airline regulations) to maintain sharpness and smooth operation. Apply oil after cleaning and before storage.
  • Handle blades with care to prevent damage or dulling.

Storage:

  • After use, turn off the device and store it in a dry place.
  • Keep away from children.
  • Store the device and its accessories in a safe place to prevent damage.

Troubleshooting

ProblemPossible CauseSolution
Device does not turn on.Battery is low or depleted.Charge the device fully.
Device runs slowly or pulls hair.Blades are dirty or not oiled.Clean the blades and apply clipper oil.
Device not charging.USB cable or adapter is faulty; connection is loose.Check cable connection, try a different USB port or adapter.
Blades feel dull.Blades require oiling or are worn out.Clean and oil the blades. If problem persists, consider professional blade sharpening or replacement.

Specifications

FeatureDetail
ModelV-640 S3 (Hair Clipper / Hair Trimmer / Shaver)
Power SupplyUSB Charging
VoltageGlobal Universal (100-240V)
Motor TypeROTARY
Motor SpeedUp to 9000 RPM
Blade Material (Clipper/Trimmer)Ceramic and Powder Metallurgic / DLC-Coated
Shaver FoilDual-Layer Black Titanium-Coated
Hair Clipper Battery2500mAh Li-ion
Hair Clipper Charging Time3 Hours
Hair Clipper Working TimeUp to 250 Minutes
Hair Trimmer Battery2000mAh Li-ion
Hair Trimmer Charging Time2.5 Hours
Hair Trimmer Working TimeUp to 240 Minutes
Shaver Battery1200mAh Li-ion
Shaver Charging Time2 Hours
Shaver Working TimeUp to 150 Minutes
Minimum Cutting LengthLess than 0.5mm
Maximum Cutting Length12mm (with guide comb)
Length Adjustment MethodChange of nozzles / Taper Lever
Commodity Quality Certification3C, CE, UL, GS

User Tips

  • For best performance and longevity of your blades, always clean and oil them after every use. This prevents rust and keeps the blades sharp.
  • Ensure the device is fully charged before a long grooming session to avoid power interruptions.
  • When using the shaver, stretch your skin taut to achieve a closer and more comfortable shave.

Warranty and Support

All VGR products come with a 12-month warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For any product inquiries, troubleshooting assistance, or warranty claims, please contact your retailer or the official VGR customer support channel.

Note: Due to airline regulations, lubricants are not included with the product.

A PDF version of this manual may be available for download from the seller's product page: View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.