BASEUS Bowie MC2 AIR

Contents

Baseus Bowie MC2 AIR Clip-on TWS Earbuds User Manual

Model: Bowie MC2 AIR | Brand: BASEUS

1. Introduction

Thank you for choosing the Baseus Bowie MC2 AIR Clip-on TWS Earbuds. These open-ear wireless earphones are designed for comfort, style, and high-quality audio, featuring SuperBass 2.0, 4-Mic AI Clear Calls, and IP67 water resistance. This manual provides essential information for setting up, operating, and maintaining your earbuds.

Baseus Bowie MC2 AIR Clip-on TWS Earbuds and charging case

Figure 1: Baseus Bowie MC2 AIR Earbuds and Charging Case

2. What's in the Box

Please check the package contents to ensure all items are present:

  • Baseus Bowie MC2 Air Earbuds
  • USB-C Charging Cable
  • Charging Case
  • Quick Start Guide (this manual)
Contents of the Baseus Bowie MC2 Air package

Figure 2: Package Contents

3. Specifications

FeatureSpecification
Product NameBaseus Bowie MC2 Air
Driver Unit11 mm dynamic
Frequency Response Range20 Hz - 20 kHz
Audio CodecSBC, AAC
Bluetooth VersionV6.0
Multipoint ConnectionYes
Low Latency38 ms
Battery Capacity (per earbud)50 mAh / 0.1925 Wh
Battery Capacity (charging case)500 mAh / 1.85 Wh
Playback Time (earbuds only)Approx. 11 hours (at 50% volume, Bass Boost off)
Playback Time (with charging case)Approx. 49 hours
Water ResistanceIP67
Weight (per earbud)4.9g
MaterialABS, Plastic
Charging PortType-C
Maximum Wireless Range<10m

Note: The above parameters are manual measurements, and the error of 3-5mm is normal. Playback time is based on continuous audio playback tests conducted by Baseus Lab at 50% volume. The IP67-rated protection applies to earbuds only, while the charging case features standard protection. All data is obtained from Baseus Lab, results may vary from actual use.

Detailed specifications table and product dimensions for Baseus Bowie MC2 Air

Figure 3: Product Specifications and Dimensions

4. Setup

4.1. Powering On/Off

  • Power On: Open the charging case, and the earbuds will automatically power on.
  • Power Off: Place the earbuds back into the charging case and close the lid. They will automatically power off.

4.2. Initial Pairing

  1. Open the charging case. The earbuds will enter pairing mode.
  2. On your device (smartphone, tablet, etc.), enable Bluetooth.
  3. Search for "Baseus Bowie MC2 Air" in the list of available Bluetooth devices.
  4. Select the earbuds to connect. You will hear a confirmation tone once connected.

4.3. Multipoint Pairing

The Baseus Bowie MC2 Air supports multipoint connection, allowing seamless switching between two connected devices.

  1. Connect the earbuds to your first device as described in "Initial Pairing".
  2. Disable Bluetooth on the first device. The earbuds will re-enter pairing mode.
  3. Connect the earbuds to your second device.
  4. Re-enable Bluetooth on the first device. The earbuds will automatically connect to both devices.
  5. To switch between devices, simply play audio on the desired device.
Man using Baseus Bowie MC2 Air earbuds with a laptop and smartphone, demonstrating multipoint connection

Figure 4: Instant Multipoint Connection

5. Wearing the Earbuds

The Baseus Bowie MC2 Air features an ergonomic clip-on design for a secure and comfortable fit.

  1. Gently open the C-ring of the earbud.
  2. Position the earbud over your ear, ensuring the speaker part is aligned with your ear canal.
  3. Release the C-ring so it gently clips onto your ear, providing a stable 4-point support.
  4. Adjust for optimal comfort and sound delivery.
Diagram showing the 4-point secure fit of the Baseus Bowie MC2 Air earbuds on an ear

Figure 5: 4-Point Secure Fit

Close-up of the CloudComfort Air Cushion design on the earbud

Figure 6: CloudComfort Air Cushion

6. Operating the Earbuds

6.1. Button Controls

The earbuds feature user-friendly physical buttons to prevent accidental touches. The controls are as follows:

FunctionAction
Music Mode
Play/PauseSingle Press (x1)
Next TrackDouble Press (x2)
Previous TrackTriple Press (x3)
Volume UpPress and Hold (R earbud) for 1.5s
Volume DownPress and Hold (L earbud) for 1.5s
Phone Calls
Answer or End a CallSingle Press (x1)
Reject a CallPress and Hold for 1.5s
Diagram illustrating button controls for music playback and phone calls on the earbuds

Figure 7: Button Control Functions

6.2. Smart App Control

Enhance your listening experience by downloading the dedicated Baseus app. The app allows you to:

  • Adjust EQ Modes
  • Activate Bass Boost
  • Locate your earbuds (requires GPS access)

Scan the QR code in the Quick Start Guide (or visit baseus.com/pages/support-center) to download the app.

Smartphone screen showing the Baseus app interface for earbud control

Figure 8: Smart App Control Interface

6.3. SuperBass 2.0

The earbuds feature AI-powered dynamic tuning tech that delivers adaptive, heart-thumping bass. You can activate or deactivate SuperBass 2.0 via the app or specific button controls (refer to app for details).

6.4. 4-Mic AI Clear Calls

Equipped with a 4-mic matrix array, AI Wind Noise Shield, and Adaptive Mic Selection, these earbuds ensure clear conversations even in noisy environments.

Diagram showing the 4-mic array and AI features for clear calls

Figure 9: 4-Mic AI Clear Calls Technology

7. Battery and Charging

7.1. Charging the Earbuds and Case

  1. Connect the provided USB-C charging cable to the charging port on the case.
  2. Connect the other end of the cable to a USB power source (e.g., wall adapter, computer USB port).
  3. The indicator light on the charging case will show the charging status.
  4. A full charge for the case and earbuds typically takes approximately 1.5 hours.

7.2. Battery Life

  • Earbuds Only: Approximately 11 hours of playback time (at 50% volume, Bass Boost off).
  • With Charging Case: Up to 49 hours of total playback time.
  • Rapid Charge: 10 minutes of charging provides approximately 2 hours of playtime.
Diagram showing battery life with and without charging case, and rapid charge feature

Figure 10: Battery Life and Charging Details

8. Maintenance and Care

8.1. Cleaning

  • Use a soft, dry cloth to clean the earbuds and charging case.
  • Do not use abrasive cleaners or solvents.
  • Avoid getting moisture into any openings.

8.2. Water Resistance

The earbuds are IP67 dust- and water-resistant, meaning they can withstand rain, sweat, and splashes. However, the charging case is not water-resistant. Avoid submerging the earbuds in water for extended periods or exposing them to high-pressure water jets.

Baseus Bowie MC2 Air earbuds shown with water splashes, indicating IP67 water resistance

Figure 11: IP67 Water Resistance

8.3. Storage

  • Store the earbuds in their charging case when not in use to protect them and keep them charged.
  • Avoid extreme temperatures and direct sunlight.

9. Troubleshooting

ProblemSolution
Earbuds not pairing/connectingEnsure earbuds are charged. Turn off and on Bluetooth on your device. Try factory reset.
Only one earbud workingPlace both earbuds in the case, close the lid, then open again. Check individual earbud charge. Try factory reset.
Low volume or poor sound qualityAdjust volume on both earbuds and connected device. Ensure earbuds are clean and properly seated in your ears. Check EQ settings in the app.
Charging case not chargingEnsure USB-C cable is properly connected and power source is working. Try a different cable or power adapter.
Earbuds falling outEnsure earbuds are worn correctly, with the C-ring securely clipped to your ear. Adjust the fit for better stability.

9.1. Factory Reset

If you experience persistent issues, a factory reset may resolve them. Refer to the Quick Start Guide for specific instructions on performing a factory reset.

10. User Tips

  • For the best audio experience, ensure the earbuds are properly seated in your ears. The adaptive C-bridge design and CloudComfort Air Cushions are designed for a snug, pressure-relief fit.
  • Experiment with the EQ modes and Bass Boost feature in the Baseus app to customize your sound profile.
  • The physical buttons are designed to prevent accidental touches, so a firm but gentle press is usually sufficient for controls.
  • Regularly clean your earbuds to maintain optimal sound quality and hygiene.
  • Take advantage of the multipoint connection feature for seamless switching between your phone and laptop.

11. Frequently Asked Questions (FAQ)

Q: Can the Baseus Bowie MC2 Air connect to more than one device at a time?
A: Yes, the earbuds support Baseus Smart-Connect (BSC) technology for seamless multipoint switching between two devices.
Q: Do these earbuds have a language translator?
A: No, these earbuds do not feature a built-in language translator.
Q: Are the earbuds compatible with iPhone?
A: Yes, the earbuds use Bluetooth 6.0 and are compatible with any Bluetooth-enabled device, including iPhones.

12. Warranty and Support

12.1. Warranty Information

Please refer to the Quick Start Guide or the official Baseus website for detailed warranty information specific to your region.

12.2. Contact Us

If you require further assistance or have any questions, please contact Baseus customer service:

12.3. Manufacturer Information

Manufacturer: Shenzhen Baseus Technology Co., Ltd
Address: 2nd Floor, Building B, Baseus Intelligence Park, No.2006, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen

For the most up-to-date information and additional resources, please visit the official Baseus website.

© 2024 Baseus. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.