1. Introduction
Thank you for choosing the XSDTS NT01 Smart Lock. This advanced digital deadbolt offers multiple unlocking methods, robust security features, and smart home integration via the Tuya application. Designed for both indoor and outdoor use, its IP66 waterproof and high-temperature resistant construction ensures reliable performance in various environments. This manual provides essential information for the safe installation, setup, operation, and maintenance of your smart lock.
2. Safety & Warnings
Please read all safety warnings and instructions carefully before installation and use. Failure to follow these instructions may result in injury, product damage, or voiding of the warranty.
2.1 General Safety Precautions
- Do not modify, disassemble, or refit the product without authorization.
- Avoid using the product for non-intended purposes to prevent safety hazards or product damage.
- Ensure the product is installed on a flat, firm, and stable surface.
- Keep the product away from direct sunlight, high temperatures, humidity, open flames, and corrosive substances.
- Ensure adequate space around the product for ventilation and daily use, and that no obstacles affect its normal operation.
2.2 Battery Warnings
The XSDTS NT01 Smart Lock uses 4 PCS AA 1.5V batteries for primary power. It also supports DC 12V input and has a USB port for emergency power supply.
WARNING: Battery Safety
- Keep batteries out of reach of children. Swallowing batteries can lead to severe internal burns and medical attention is required immediately.
- Always use the specified battery type (4x AA 1.5V). Do not mix old and new batteries, or different types of batteries.
- Do not expose batteries to excessive heat or open flame.
- Dispose of used batteries according to local regulations.
- If using a lithium-ion battery for external power, mind potential fire risk and strictly follow its instruction manual for charging and storage.
2.3 Before First Use
- Inspection on Receipt: Check the main body of the product and all accessories for any damage, deformation, or missing parts caused by transportation. Do not use the product if any abnormality is found; contact customer support immediately.
- Surface Cleaning: Wipe the product surface with a clean, soft, dry, or slightly damp cloth to remove dust and packaging residues. Avoid using corrosive, abrasive cleaners, or sharp tools to clean, as this may scratch the surface coating or damage the material.
- Proper Placement: Ensure the lock is installed correctly and securely on the door.
2.4 Notes on Moving the Product
- Remove all items placed on the product and disassemble any detachable fragile parts (if applicable) before moving to avoid falling and damage during transportation.
- Lift the product from its main stress-bearing frame when moving; do not drag, pull, or carry the product by fragile, protruding, or adjustable parts to prevent deformation or damage.
- For large and heavy products, it is recommended to move with multiple people in coordination to avoid personal injury or product damage caused by uneven force.
3. Product Overview
The XSDTS NT01 is an advanced smart lock designed for enhanced security and convenience. It features a durable, weather-resistant design suitable for various door types.
3.1 Key Features
- IP66 Waterproof & Durable Design: Certified IP66 for outdoor environments, resistant to wind and rain erosion, ensuring long-term stable operation.
- Multiple Unlocking Methods: Supports Fingerprint, Passcode, Temporary Password, IC Card, Physical Key, Bluetooth, and Remote Control (with optional gateway).
- High-Precision Fingerprint Recognition: Adopts a semiconductor biometric sensor with 360° fingerprint angle recognition, 0.5-second fast response, and a false recognition rate of <0.001%.
- Tuya App Remote Access: Manage your lock remotely, enable temporary unlocking for guests, and monitor access logs via the Tuya Smart or Smart Life app.
- Adaptive Installation: Supports autonomous switching of left/right door opening direction, compatible with 90% standard door types.
- Anti-Pry Alarm: Integrated security features to deter tampering.
- Emergency Power: Low battery alarm and USB port for emergency power supply.
3.2 Components and Interface
The smart lock consists of an outer unit (keypad with fingerprint sensor) and an inner unit (battery box, unlock knob, wiring). Refer to the diagrams below for component identification.
4. Specifications
| Feature | Specification |
|---|---|
| Product Name | XSDTS Tuya WiFi Smart Digital Deadbolt Lock Fingerprint IP66 |
| Brand Name | XSDTS |
| Door Type Compatibility | Wood door, Steel door, Stainless Steel door, Aluminum door, Brass door |
| Unlocking Methods | APP (Tuya Smart/Smart Life), Fingerprint, Password, IC Card, Key, Bluetooth, Remote Control (Optional Gateway) |
| Application Environment | Home, Hotel, Apartments, Office |
| App Name | Tuya Smart / Smart Life |
| Working Temperature | -20~60℃ |
| Fingerprint Capacity | 100pcs Fingerprints |
| Suitable Door Thickness | 30-60mm |
| Power Supply | 4x AA 1.5V batteries (primary), DC 12V input (optional), USB emergency power |
| Weight | 3.0 kg |
5. Installation
The XSDTS NT01 Smart Lock is designed for versatile installation on various door types and orientations.
5.1 Door Compatibility
This smart lock is suitable for a wide range of doors, including wooden, steel, stainless steel, aluminum, and brass doors. It supports door thicknesses between 30mm and 60mm. The adaptive design allows for autonomous switching of left/right door opening direction.
5.2 General Installation Notes
- Ensure the door frame and door itself are structurally sound and can support the lock's weight and operation.
- Follow the detailed installation instructions provided in the full PDF manual for precise measurements and drilling.
- Proper wiring is crucial for the lock's functionality, especially if connecting to a DC 12V power source or external control systems. Refer to the internal wiring diagram.
- After installation, test all unlocking methods and ensure the lock operates smoothly without obstruction.
6. Initial Setup
After physical installation, proceed with the initial setup to configure your smart lock.
6.1 Powering the Lock
The lock can be powered by 4x AA 1.5V batteries. Insert them into the battery compartment in the inner unit, ensuring correct polarity. Alternatively, the lock can be connected to a DC 12V power source via the designated ports (refer to Figure 3.2 for wiring).
6.2 Tuya App Connection (Wi-Fi/Bluetooth Models)
- Download the Tuya Smart or Smart Life app from your smartphone's app store.
- Register or log in to your account.
- Follow the in-app instructions to add a new device. Ensure your phone's Bluetooth and Wi-Fi are enabled.
- The app will guide you through pairing the lock. This typically involves pressing a button on the lock or entering a specific code to put it into pairing mode.
- Once connected, you can manage users, generate temporary passwords, and monitor access logs through the app.
6.3 Adding Users (Fingerprints, Passcodes, IC Cards)
Refer to the full PDF manual for detailed steps on adding and managing user credentials. Generally, this involves:
- Fingerprint: Access the lock's programming mode (usually via a master code or reset button), then follow prompts to scan the fingerprint multiple times. The lock can store up to 100 fingerprints.
- Passcode: In programming mode, enter a new passcode and confirm it.
- IC Card: Present the IC card to the designated area on the lock in programming mode to register it.
7. Operation
The XSDTS NT01 Smart Lock offers multiple convenient ways to unlock your door.
7.1 Unlocking Procedures
- Fingerprint Unlock: Place your registered finger on the fingerprint sensor. The lock will unlock in approximately 0.3 seconds if recognized.
- Passcode Unlock: Enter your registered passcode on the keypad, then press '#' or the designated unlock button.
- IC Card Unlock: Present your registered IC card to the card reader area on the lock.
- Physical Key Unlock: In case of emergency or power failure, use the provided physical key to unlock the door via the mechanical keyhole.
- Tuya App Unlock: Open the Tuya Smart/Smart Life app, select your lock, and use the unlock function within the app.
- Bluetooth Unlocking: For Bluetooth-enabled models, unlock directly via the app when within Bluetooth range.
- Remote Unlocking (Optional Gateway): For Wi-Fi models, if an optional gateway is connected, you can unlock the door remotely from anywhere with internet access via the Tuya app.
- Temporary Passwords: Generate time-limited or single-use passwords via the Tuya app for guests or service personnel.
7.2 Low Battery Alarm & Emergency Power
The lock will provide a low battery alarm when the battery level is critical. In such cases, replace the AA batteries promptly. If the batteries completely drain, you can use the USB charging port on the outer unit to provide emergency power with a power bank, or use the physical key to unlock the door.
8. Maintenance
Regular maintenance ensures the longevity and optimal performance of your smart lock.
8.1 Daily Cleaning
Wipe the product surface regularly with a clean, soft, dry, or slightly damp cloth to remove dust, stains, water marks, or oil residue. For stubborn stains, use a neutral cleaner diluted with water, then immediately dry the surface with a clean, dry cloth. Avoid corrosive or abrasive cleaners.
8.2 Regular Inspection
Inspect the product regularly (recommended once a month). Check the firmness of all connecting parts (screws, nuts, fasteners, etc.), the integrity of moving/folding structures, and the wear of stress-bearing parts. Tighten any loose connecting parts. Stop using the product immediately if any damaged, deformed, or failed parts are found, and contact customer support for replacement or repair.
8.3 Long-Term Storage
If the product is not used for a long time, clean it thoroughly and dry it completely first. Place it in a dry, ventilated, and cool environment, and cover it with a dust cover to prevent dust accumulation, moisture, mildew, or material aging. For metal parts, apply a small amount of anti-rust oil to the connecting and exposed parts regularly to avoid rusting.
8.4 Accessory Maintenance
Keep matching accessories (such as IC cards, keys, small tools) clean and intact. Replace damaged or worn accessories in time to ensure normal use and service life.
9. Troubleshooting
If you encounter issues with your XSDTS NT01 Smart Lock, try the following troubleshooting steps:
- Lock not responding: Check battery levels. Replace batteries if low. Use the USB emergency power or physical key.
- Fingerprint not recognized: Ensure your finger is clean and dry. Try re-registering your fingerprint.
- Passcode not working: Double-check the entered code. Ensure the lock is not in a locked-out state due to multiple incorrect attempts.
- App connectivity issues: Ensure your phone's Bluetooth and Wi-Fi are on. Restart the app and the lock. Check your Wi-Fi network connection if using a gateway.
- Lock mechanism stuck: Ensure there are no physical obstructions in the door frame or latch. Lubricate moving parts if necessary (refer to maintenance section).
- Alarm sounding unexpectedly: Check for tampering attempts or ensure the lock is properly secured.
For persistent issues, consult the full PDF manual or contact customer support.
10. User Tips
- Regular Battery Checks: Even with a low battery alarm, it's good practice to check battery levels periodically, especially before extended absences.
- Master Code Security: Keep your master passcode secure and do not share it. Change it regularly.
- Physical Key Backup: Always keep a physical key in a safe, accessible location outside your home for emergencies.
- App Notifications: Enable notifications in the Tuya app to receive alerts for low battery, tampering attempts, or access logs.
- Firmware Updates: Check the Tuya app periodically for any available firmware updates for your lock to ensure optimal performance and security.
11. Warranty & Support
For warranty information, technical support, or service inquiries, please contact the manufacturer or authorized representative:
Manufacturer:
Company Name: GuangzhouWuxinE-commerceCo., Ltd
Full Address: Room301-2, No.53LixingRoad, LichengSubdistrict, Guangzhou Guangdong Province, China
Telephone: +86-19997119667
Email: zh253268@qq.com
EU Authorized Representative:
Company Name: DA Ruchery 2
Address: 5 rue Gaye-Marie, Zac de Saint Martin du Touch Haute-Garonne Occitanie
Email: xuancuongngo071@gmail.com
Please retain your proof of purchase for warranty claims.
A detailed PDF version of the user manual is available for download: User Manual (PDF)