Product Overview
The VGR Hair Trimmer V-285 is a professional-grade hair cutting machine designed for both personal and barber use. It features a high-speed motor, adjustable cutting lengths, and a long-lasting rechargeable battery. This combo includes both a hair clipper and a hair trimmer, offering versatility for various grooming needs.

Image: VGR Hair Trimmer V-285, showcasing its design, LED display, USB-C charging, and 2000mAh lithium battery.
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
- Handle with care to avoid cuts or injuries.
NOTE: This product must comply with all applicable safety and regulatory requirements in the market where it is sold.
Package Contents
The VGR Hair Trimmer V-285 package typically includes:
- VGR Hair Clipper (Model V-285)
- VGR Hair Trimmer (Model V-285)
- USB Charging Cable
- Cleaning Brush
- Guide Combs (various sizes for clipper and trimmer)

Image: Contents of the VGR Hair Trimmer package, including the trimmer, USB cable, cleaning brush, and multiple guide combs.

Image: A user unboxing the VGR Hair Trimmer, showing the trimmer, guide combs, and cleaning brush neatly arranged in the box.
Setup
- Unpacking: Carefully remove all components from the packaging.
- Initial Inspection: Inspect the trimmer for any signs of damage. Do not use if damaged.
- Remove Protective Films: Remove all protective films from the device, especially from the blades and display.
- Charging: Before first use, fully charge the trimmer. Connect the provided USB cable to a certified 5V power adapter. The LED display will show the charging progress. A full charge takes approximately 2.5 hours.
- Blade Lubrication: It is recommended to apply a small amount of clipper oil (not included) to the blades before first use and after each cleaning to ensure smooth operation and longevity.

Image: Diagram illustrating the USB charging port and charging process, indicating 2.5 hours for charging and 240 minutes of running time.
Operation
- Power On/Off: Press and hold the power button for 3 seconds to turn on the device. The LED display will illuminate. Press and hold again for 3 seconds to turn off.
- Adjusting Cutting Length (Clipper): The hair clipper features a 5-position adjustable taper lever (0.8mm to 2.0mm) for fine-tuning cutting length. Move the lever up or down to select the desired length.
- Attaching Guide Combs: Select the desired guide comb (e.g., 1.5mm, 3mm, 4.5mm, 6mm, 10mm, 13mm for clipper; 1mm, 2mm, 3mm for trimmer). Align the comb with the blade and push it firmly until it clicks into place.
- Dual-Speed Control (Clipper): Short press the power button to switch between high and low-speed modes (up to 9000 RPM for high speed).
- Trimming/Cutting: Hold the trimmer firmly and move it against the direction of hair growth for an even cut.
- Monitoring Battery: The smart LED display shows the real-time battery percentage, allowing you to monitor power levels during use.

Image: VGR Hair Trimmer with 6 guide combs (1.5mm, 3mm, 4.5mm, 6mm, 10mm, 13mm) for versatile styling.

Image: Close-up of the VGR Hair Trimmer showing the taper lever for adjusting cutting length from 0.8mm to 2.0mm.
Video: Demonstration of the VGR Hair Trimmer's power-on, speed adjustment, and taper lever functionality.
Maintenance
- Cleaning: After each use, turn off the trimmer and remove the guide comb. Use the provided cleaning brush to remove hair clippings from the blades and the trimmer body.
- Washing Blades: The blades can be washed under water. Ensure the trimmer is turned off and disconnected from power before washing. Dry thoroughly before reassembling or storing.
- Lubrication: Apply 1-2 drops of clipper oil (not included) to the blades after cleaning and drying to maintain optimal performance and prevent rust.
- Storage: Store the trimmer in a dry place, away from direct sunlight and out of reach of children.

Image: The cleaning brush included with the VGR Hair Trimmer for maintenance.
Troubleshooting
Common Issues and Solutions
- Trimmer not turning on:
- Ensure the battery is charged. Connect to a power source and check the LED display.
- Press and hold the power button for 3 seconds to activate.
- Poor cutting performance:
- Clean the blades thoroughly to remove any trapped hair.
- Apply clipper oil to the blades.
- Ensure the guide comb is correctly attached.
- Check if the blades are damaged. If so, replacement blades may be needed.
- Battery not charging:
- Ensure the USB cable is securely connected to both the trimmer and a working 5V power adapter.
- Try a different USB cable or power adapter.
For replacement blades, please contact customer service or refer to the seller's official store for compatible parts.
Specifications
| Feature | Specification |
|---|---|
| Product Name | Hair Clipper / Hair Trimmer |
| Model | V-285 |
| Battery | 2000mAh Lithium battery |
| Rated Input | 5V ⇒ 1A |
| Charging Time | 2.5 hours |
| Working Time (full charged) | 150 minutes (Clipper) / 240 minutes (Trimmer) |
| Motor Type | High-speed motor |
| Range of Speeds | 7500-9000 RPM |
| Blade Material | Ceramic and Powder Metallurgic Blade (Clipper) / Ceramic and DLC Coating Blade (Trimmer) |
| Guide Combs (Clipper) | 1.5 / 3 / 4.5 / 6 / 10 / 13 mm |
| Guide Combs (Trimmer) | 1 / 2 / 3 mm |
| Voltage | Global Universal (100-240V) |
| Certification | UL, GS, CE, CCC |

Image: Detailed product specifications for the VGR Hair Clipper, including battery, input, charging time, working time, motor type, speed range, and guide combs.

Image: Detailed product specifications for the VGR Hair Trimmer, including battery, input, charging time, working time, motor type, speed range, and guide combs.
User Tips
- Blade Care: Users recommend regularly oiling the blades for optimal performance, especially since the product does not include lubricants due to shipping regulations.
- Power Monitoring: The LED display is useful for monitoring battery life, allowing users to plan their grooming sessions without unexpected power loss.
- Versatility: The V-285 is praised for its good power and ability to cut very well, making it suitable for various hair types and styles.
Warranty and Support
All VGR products come with a 12-month warranty.
For any issues or inquiries, please contact the seller's customer service.
Manufacturer: Ningbo Woji Electric Appliance Co., Ltd., CN-CN-No. 656, Kaifa East Road, Zhouxiang Town, Cixi City, Ningbo, Zhejiang.
EU Authorized Representative: Jorge Wilsone, CASTELLANA 9144, 28046 Madrid.
A comprehensive user manual is available in PDF format for detailed instructions and information. The PDF can be accessed via the seller's official channels.