1. Product Overview
The QCY MeloBuds N60 are advanced wireless earphones featuring dual drivers, LDAC Hi-Res audio support, and adaptive active noise cancellation. They offer a premium listening experience with multi-point connection capabilities.
1.1 Package Contents
- User Manual
- Charging Case
- Charging Cable (Type-C)
- Replaceable Ear Tips Set (XS, S, M, L, XL)
1.2 App Download
Scan the QR code below with your mobile browser to download the QCY app. The app allows for custom touch control settings, EQ adjustments, firmware updates, and more.
2. Setup
2.1 First Time Connection
- Remove both earbuds from the charging case, tear off the protective isolation film, then place both earbuds back into the charging case. This step activates the new earbuds.
- Take both earbuds out of the charging case again.
- Refresh the Bluetooth device list on your phone and select "QCY MeloBuds N60" to connect.
Note: The earbuds power on automatically when the case opens. If they do not, please recharge and retry.
2.2 One-Key Pairing Mode
- With both earbuds in the charging case and the lid open, ensure they are connected to your phone.
- Long press the button on the charging case for 3 seconds. The earbuds will disconnect from the phone and enter pairing mode.
2.3 Multi-Point Connection
To connect your earbuds to two devices simultaneously:
- Connect the earbuds to Device A.
- Turn off Bluetooth on Device A. The earbuds will re-enter pairing mode.
- Turn on Bluetooth on Device B and connect to "QCY MeloBuds N60".
- Turn on Bluetooth on Device A and select the previously paired name to connect. The earbuds are now connected to both devices simultaneously.
2.4 How to Fit
- Choose the ear tip size that best fits your ears.
- Identify the left and right earbuds and insert them into the canal of your ears.
- Slightly rotate and adjust the earbuds to find the most comfortable and secure position. Ensure the microphone points downwards, towards your mouth.
Note: If the earbuds are not worn correctly, it may affect sound quality and hearing.
2.5 Factory Reset
To clear pairing records and restore factory settings (useful if unable to connect normally):
- Place the earbuds in the charging case with the lid open.
- Long press the button on the bottom of the charging case for 10 seconds until the red and white LED indicators flash alternately for 3 seconds. The reset is complete.
- Close the lid for 5 seconds. The earbuds can then be used normally.
Note: After a factory reset, apply the first time pairing method to connect.
3. Operating Instructions
3.1 Power On/Off
- Power On: Open the charging case. The earbuds will automatically power on. If the earbuds are outside the charging case and powered off, long press the touch panel for 1.5 seconds to power them on.
- Power Off: Place the earbuds back into the charging case and close the lid. The earbuds will automatically power off.
3.2 Controls
| Function | Action |
|---|---|
| Play/Pause Music | Take off any earbud (Smart Wearing Detection) |
| Previous Track | Triple tap left earbud |
| Next Track | Triple tap right earbud |
| Answer/End Call | Double tap |
| Reject Call | Long press |
| Activate Voice Assistant | Triple tap left earbud |
| Switch ANC/Transparency Mode | Long press right earbud for 1.5 seconds |
3.3 Adaptive ANC Noise Cancelling
The MeloBuds N60 features Adaptive Active Noise Cancellation (ANC) with QCY PureSilenz™ technology. With 3 smart sensors per earbud, it blocks noise from all directions, offering ultra-wideband noise reduction up to 5.5KHz for a clear and quiet listening experience.
3.4 Smart Wearing Detection
The earbuds are equipped with smart wearing detection. Music automatically pauses when you take the earbuds off and resumes instantly when you put them back on.
3.5 Hi-Res Sound & LDAC Codec
With LDAC codec support, the MeloBuds N60 delivers 300% more sonic detail than standard Bluetooth audio, providing richer and truer sound quality.
3.6 Coaxial Dual Drivers
The earbuds feature coaxial dual drivers (6mm dynamic driver and 11mm dynamic driver) that work in synergy to deliver deep, powerful bass, crystal-clear highs, and nuanced mids.
4. Maintenance
4.1 Battery Indication
Charging Case Indicator:
- White light on: 60%-100% battery
- Yellow light on: 20%-59% battery
- Red light on: 19%-5% battery
- Red light flashes 3 times: 0%-5% battery
Note: Yellow light flashes slowly during charging, and white light is always on when fully charged.
Earbuds (in/out of case) Indicator:
- White light flashes: 60%-100% battery
- Yellow light flashes: 20%-59% battery
- Red light flashes: 19%-5% battery
- Red light flashes 3 times: 0%-5% battery
4.2 Cleaning
Do not use oil or other volatile liquids to wipe this product. Use a soft, dry cloth for cleaning.
4.3 Storage
If the product is not used for more than 2 weeks, please charge it to maintain battery health.
4.4 Battery Safety
- Do not disassemble or modify the battery, insert foreign objects, expose it to high temperatures, or immerse it in water or other liquids to prevent battery leakage, overheating, fire, or explosion. Battery replacement should only be done by the manufacturer.
- Do not drop, crush, or puncture the battery. Prevent external pressure that may lead to internal short circuits and overheating.
5. Troubleshooting
- Only one earbud has sound: Place both earbuds back into the charging case, close the lid, then take them out again to check if both produce sound. If still only one earbud has sound, perform a factory reset.
- Phone cannot connect: Delete the pairing record for "QCY MeloBuds N60" on your phone, then search and pair again.
- No sound during music/calls (Android): In your phone's Bluetooth settings for the connected device, check the settings for phone audio and media audio. Try turning them off and then back on. If still no sound, ensure your earbuds' firmware is updated and re-pair.
- Video/game delay: Delays can be caused by environmental factors, network conditions, and the mobile phone's codec.
- Sound stuttering/intermittent: Interference from strong Wi-Fi/4G signals or high-power electrical appliances in the vicinity can cause sound stuttering or intermittence. Try changing your environment or re-pairing the earbuds.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | QCY |
| Model | MeloBuds N60 |
| Wireless Type | Bluetooth |
| Communication | Wireless |
| Style | Tws in-ear headphones |
| Vocalism Principle | Dynamic |
| Active Noise-Cancellation | Yes |
| Voice Assistant Built-in | Yes |
| Volume Control | Yes |
| Waterproof | Yes |
| Support APP | Yes |
| Codecs | sbc, LDAC |
| Number Of Drivers | 6 |
| Maximum Wireless Range | 10m-20m |
| NFC Technology | No |
| Material | PC, ABS |
| Charging Method | Charging case |
| Function | for Video Game, Common Headphone, For Mobile Phone, Sport, For Outdoor, For Office, For Study |
| Certification | CE, FCC, RoHS, BQB, CB |
| Origin | Mainland China |
| High-concerned chemical | None |
| Package Weight | 0.14 kg |
| Package Dimensions | 10cm (L) x 5cm (W) x 13cm (H) |
| Wireless Frequency | 2.402-2.480GHz |
| Charger Power | 2W-5W (for maximum charging speed) |
7. Warranty and Support
7.1 Warranty Information
QCY products come with a 12-month warranty period from the date of purchase. Please retain your proof of purchase.
Free Service: During the product warranty period, for faults caused by the product itself, please contact the dealer with your proof of purchase to receive after-sales service.
Not Covered Under Warranty: The warranty does not cover damages or malfunctions resulting from:
- Natural disasters (e.g., earthquakes, lightning, abnormal voltage).
- Unauthorized disassembly, modification, or replacement with non-original parts.
- Improper use or failure to follow instructions (e.g., water damage, drops, crushing, exposure to abnormal temperatures/humidity).
- Lost or stolen products.
- Products without sufficient proof of purchase.
- Use of unspecified adapters and accessories.
7.2 Contact and Support
For after-sales service or further inquiries, please contact:
- Phone: 4008-306-718
- Website: www.qcy.com
- Manufacturer: Dongguan Hele Electronics Co., Ltd.
- Address: Room 101, Block 1, No.38, Dacao Dachou Road, Daojiao Town, Dongguan City, Guangdong Province, China
A detailed user manual is also available in PDF format for download: QCY MeloBuds N60 User Manual (PDF)
8. User Tips
- Many users praise the outstanding quality and value for money of the QCY MeloBuds N60.
- Ensure you download the official QCY app for full customization and firmware updates to enhance your experience.
- If you experience any connectivity issues, a factory reset often resolves the problem.
- Always use the provided ear tips or choose the correct size for optimal sound and noise cancellation performance.
9. Safety Instructions
- Please carefully read and retain this user manual before using the product.
- Charge the product fully before first use.
- If the product is not used for more than 2 weeks, please recharge it.
- You must choose a charger produced by a legitimate manufacturer and certified by national safety authorities.
- If your phone cannot detect the Bluetooth earbuds, either re-enter pairing mode or perform a factory reset on the earbuds. If it's a phone program error, close and reopen Bluetooth on the phone or restart the phone.
- Do not disassemble or modify the earbuds for any reason, as it may result in fire, electronic breakdown, or permanent damage to the product.
- Do not expose the product to extremely low or high temperatures (below 0°C or above 45°C).
- Do not point the product indicator light near the eyes of children or animals.
- Do not use the product during thunderstorms, as it may cause abnormal operation and increase the risk of electric shock.
- Do not use oil or other volatile liquids to clean the product.
- Please do not use this device for long periods of time and at high volume, as there is a risk of hearing damage.
- This product should not be disposed of with other household waste. Please recycle responsibly to promote the sustainable reuse of materials.