VGR V-640 S4

Contents

VGR V-640 S4 Professional Grooming Kit User Manual

Model: V-640 S4

Includes Hair Clipper, Hair Trimmer, Foil Shaver, and Hair Dryer

1. Introduction

The VGR V-640 S4 Professional Grooming Kit is a comprehensive set of tools designed for precise hair cutting, trimming, shaving, and drying. This kit combines the V-640 S3 (Hair Clipper, Hair Trimmer, Foil Shaver) and the V-640 HD (Hair Dryer) to provide a versatile grooming experience for both professional and home use.

Package Contents:

  • 1 x Hair Clipper
  • 1 x Hair Trimmer
  • 1 x Shaver
  • 1 x Hair Dryer
  • 3 x Constructor Comb
  • 6 x Hair Clipper Comb
  • 1 x Concentrator
  • 1 x Styling Concentrator
  • 3 x Protective Cap
  • 2 x USB Charging Cable
  • 1 x Hair Salon Cape
  • 4 x Hair Clip
  • 1 x Charging Base
  • 1 x Cleaning Brush
  • 1 x Instruction Manual (this document)
  • 1 x Suitcase
VGR V-640 S4 grooming kit with hair clipper, trimmer, shaver, and hair dryer on display.
Figure 1: VGR V-640 S4 Professional Grooming Kit

2. Safety & Warnings

Read all instructions thoroughly before using the product. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries.
  • This product does not include lubricants due to transportation regulations.

3. Setup

  1. Unpacking: Carefully remove all components from the packaging.
  2. Protective Films: Before first use, remove all protective films from the devices.
  3. Charging: Connect the provided USB cable to a certified 5V power adapter. Ensure the correct plug type (US Plug or EU Plug) is used for your region. The hair clipper, trimmer, and shaver are compatible with global voltage. The hair dryer is compatible with European standard voltage (220-240V).
  4. Initial Charge: For optimal performance, fully charge all battery-operated devices before their first use.
Interior view of the VGR V-640 S4 grooming kit carrying case with components and charging cables.
Figure 2: Grooming Kit Components in Carrying Case

4. Operating Instructions

To turn on any device, press and hold the power button for 3 seconds. A short press of the button will typically change modes or speed settings.

4.1. Hair Clipper (V-640C)

  • Features a ceramic powder metallurgy moving blade with a DLC-coated fixed blade for sharpness and durability.
  • Equipped with a 7000-9000 RPM high-speed motor for efficient cutting.
  • Utilize the 5-level adjustable length control bar and various hair clipper combs to achieve desired hair lengths.

4.2. Hair Trimmer (V-640T)

  • Features ceramic and powder metallurgy blades for precision trimming.
  • Powered by a 7000-9000 RPM high-speed motor.
  • The ergonomic body design ensures comfortable handling and maneuverability for detailed work.

4.3. Foil Shaver (V-640S)

  • Equipped with dual black titanium foils for a close shave with minimal irritation.
  • Operates at 7000-9000 RPM with a 3-speed adjustment feature to customize shaving intensity.

4.4. Hair Dryer (V-640HD)

  • Features an ultra-high-speed 110,000 RPM brushless motor for strong, consistent airflow.
  • Offers 1600-1900W power output with 3 adjustable speed settings for various hair types and styling needs.
  • Use the concentrator and styling concentrator attachments for directed airflow.
Detailed view of VGR V-640C Hair Clipper, V-640T Hair Trimmer, V-640S Foil Shaver, and V-640HD Hair Dryer with specifications.
Figure 3: Individual Grooming Tools and Their Features

5. Maintenance

  • Cleaning: After each use, turn off the device. Use the provided cleaning brush to remove hair and debris from the blades and foils.
  • Storage: Store all devices in a dry place, preferably in the provided suitcase, away from direct sunlight and moisture. Keep out of reach of children.
  • Lubrication: As lubricants are not included, it is recommended to periodically apply a small amount of clipper oil (not included) to the blades of the clipper and trimmer to maintain optimal cutting performance and extend blade life.
  • Battery Care: Avoid fully discharging the battery frequently. Charge devices when the battery indicator is low.

6. Troubleshooting

  • Device not turning on: Ensure the device is fully charged. If battery-operated, connect to a power source and try again.
  • Poor cutting performance: Clean the blades thoroughly. Ensure blades are properly aligned. If applicable, apply a small amount of clipper oil.
  • Unusual noise or vibration: Turn off the device immediately. Check for any obstructions in the blades or motor area. If the issue persists, contact customer support.
  • Hair Dryer not heating: Check if the power cord is securely plugged in. Ensure the voltage matches the hair dryer's requirements (220-240V for EU standard).

7. Specifications

Feature Specification
Brand Name VGR
Model V-640 S4
Voltage <20V (Clipper, Trimmer, Shaver); 220-240V (Hair Dryer)
Power Type Mains and battery operation
Battery Charging Time More than 2 hours
Battery Life Over 90 minutes
Blade Material Carbon (Clipper/Trimmer), Dual Black Titanium Foils (Shaver)
Motor Type ROTARY (Clipper/Trimmer/Shaver), Brushless (Hair Dryer)
Motor Speed 7000-9000 RPM (Clipper/Trimmer/Shaver), 110,000 RPM (Hair Dryer)
Hair Dryer Power Output 1600-1900W
Functions Wet haircut, Dry haircut, Fast Charging, Charging indication
Maximum Cutting Length Less than 5 mm (with attachments)
Minimum Cutting Length Less than 0.5mm
Length Adjustment Method Change of nozzles / Adjustable length control bar
Number of Nozzles 5 or more
Purpose For the head
Material Metal
Certifications 3C, CE, UL, GS, CCC
VGR V-640 S4 grooming kit components laid out, including the hair clipper, trimmer, shaver, hair dryer, and various accessories.
Figure 4: All Components of the VGR V-640 S4 Kit

8. User Tips

  • Always start with a higher comb length setting and gradually reduce it to avoid cutting too short.
  • For best results, ensure hair is clean and dry before using clippers or trimmers, unless performing a wet haircut.
  • When using the shaver, stretch the skin taut to achieve a closer and more comfortable shave.
  • Experiment with the different speed settings on the shaver and hair dryer to find what works best for your hair type and desired style.
  • Regularly clean and oil the blades of the clipper and trimmer to maintain their sharpness and prevent snagging.

9. Warranty & Support

All VGR products come with a 12-month warranty from the date of purchase.

Manufacturer Information:

Ningbo Woji Electric Appliance Co., Ltd.
CN-CN-No. 656, Kaifa East Road, Zhouxiang Town,
Cixi City, Ningbo, Zhejiang, China
Email: Tiger-Zhou@web.de

EU Authorized Representative:

Jorge Wilsone
CASTELLANA 9144, 28046 Madrid, Spain
Phone: 34-688185858

For further details and compliance information, please refer to the official user manual PDF: View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.