DEKCO Floodlight Cam Pro

Contents

Dekco 3K UHD WiFi Floodlight Camera Outdoor

Model: Floodlight Cam Pro - User Manual

1. Introduction

Thank you for choosing DEKCO security products. This manual provides essential information for the proper installation, setup, and operation of your Floodlight Cam Pro. Please read it thoroughly before use.

Important Considerations:

  1. Micro SD Card: If you do not have a Micro SD Card, please contact us directly. The Micro SD Card must be formatted after insertion.
  2. 2.4G Wi-Fi: The product only supports 2.4G Wi-Fi. Please select a 2.4G Wi-Fi network when setting up the app.
  3. Installation Location: Before installation, use your mobile phone to test the home Wi-Fi signal coverage at the planned installation position to ensure the product receives a strong signal.

2. Safety Instructions

  • Disconnect power at the fuse or circuit breaker before installing.
  • Do not install the product near flammable surfaces.
  • To avoid risk of shock, injury, or death, always be cautious when working with electricity.
  • Consult a licensed electrician if you are uncomfortable working with electrical wiring.
  • Make sure the Floodlight Camera is properly grounded.
  • The Floodlight Camera must be installed on a wall and on a UL-listed junction box.

3. What's Included

Package Contents:

  • Floodlight Cam Pro x 1
  • Type-C Power Card x 1
  • Junction Box Kits x 1
  • Mounting Base x 1
  • Installation Hook & String x 1
  • Base Screws x 4
  • Central Screw x 1
  • Central Screw Cap x 1
  • User Manual x 1

Required (not included):

  • Crosshead Screwdriver
  • USB Power Adapter (5V/1A)
  • Power Drill (15/64 mm)

4. Product Overview

Dekco Floodlight Camera with phone showing live view and 360° rotation

Dekco Floodlight Camera with phone showing live view and 360° rotation.

Close-up of the Floodlight Cam Pro camera lens

Close-up of the Floodlight Cam Pro camera lens.

Component Identification:

  • Antenna: For wireless connectivity.
  • Floodlight: Provides illumination for clear night vision.
  • PIR Motion Sensor: Detects motion in the surveillance area.
  • Lens: Captures video footage.
  • Microphone: For two-way audio communication.
  • Power Port/Reset Button/Micro SD Card Slot: Located conveniently for power, resetting, and local storage.
  • Infrared LEDs: For infrared night vision.
  • Status LED: Indicates the device's operational status.
  • Speaker: For two-way audio communication.

Micro SD Card Information:

CAUTION: Please insert the Micro SD Card according to the direction shown in the diagram. Inserting incorrectly might jam the card and damage the device.

  • Micro SD Card Port: Supports Micro SD Card for local storage (Max 128GB).
  • Reset button: Press and hold the button for 3 seconds to prepare the device for connection.
  • Card capacity requirements: 8-128GB.
  • Read and write speed requirements: Class 10 level.
  • File format: FAT32.

5. Setup

5.1. Initial Device Setup

  1. Power On: Place your Floodlight Cam Pro on a stable surface. Open the Type-C port cover and connect the device to a power source using the provided Type-C power card and a 5V/1A power adapter (not included). Wait approximately 1 minute or until the status LED blinks green.
  2. Download SafeArk App: Download the SafeArk App from the App Store (iOS devices) or Google Play (Android devices).
    QR codes for SafeArk App download on Google Play and App Store

    QR codes for SafeArk App download on Google Play and App Store.

  3. App Setup: Sign up for a SafeArk App account, then follow the on-screen instructions within the app to complete the device setup.

5.2. Preparing for Installation

  1. Select Height and Location: Hang the camera 7-10 feet (2-3 meters) above the ground. This height maximizes the detection range of the motion sensor. Avoid placing the camera under direct sunlight.
    Diagram showing optimal camera height and motion detection zone

    Diagram showing optimal camera height (7-10ft) and motion detection zone (up to 30ft).

  2. Turn Off Power: Unplug the power adapter from the camera. Close the mounting base and USB port cover. Then, shut down the circuit breaker in your house. Verify that the electricity is off by switching lights on/off.

6. Installation

6.1. Installing the Junction Box

  1. Prepare Junction Box: Remove the rubber plugs indicated in the illustration below.
    Diagram showing removal of rubber plugs from junction box

    Diagram showing removal of rubber plugs from junction box.

  2. Run Wires: Run the existing electrical wire through the hole in the junction box. If you do not have existing outdoor wires, contact a licensed electrician to run the necessary wires.
  3. Mount Junction Box:
    • Wooden Walls: Orient the two mounting holes vertically. DO NOT pre-drill holes. Use the provided screws to fix the junction box onto the wall.
    • Hard Materials (stucco, brick, concrete): Drill holes with a 15/64 inch (6 mm) drill bit. Insert the provided anchors into the holes, then use the provided screws to fix the junction box to the wall.
  4. Connect Wires: Unscrew the bolt with a flat-head screwdriver. Connect the Neutral (blue), Ground (green/green and yellow), and Live (brown) wires to their respective connectors in the junction box. Secure the wires tightly to prevent them from falling.

6.2. Mounting Your Floodlight Cam Pro

You can hang the Floodlight Cam Pro or install it vertically on the wall. Choose the installation method that best suits your junction box position.

Installation Method Options:
Diagram showing Wall Mount and Upside-down Mount options for the Floodlight Cam Pro

Diagram showing Wall Mount and Upside-down Mount options for the Floodlight Cam Pro.

Mounting Base Installation:
  1. Determine if the camera will be suspended from the ceiling or mounted on a wall.
  2. Thread the tail wire of the Floodlight Cam Pro through the three holes in the middle of the mounting base.
  3. Use the base screws on the mounting base to securely fasten the mounting base and the Floodlight Cam Pro together.
Mounting onto a Wall:
  1. Before Mounting: Pass the installation hook through the other end of the string as illustrated.
  2. Ladder Placement: Use a ladder for mounting. Do not place the ladder directly under the Floodlight Cam Pro. Position it to the lower left or right to avoid obstructing your view.
  3. Prepare for Hanging: Screw the central screw partially through the center of the junction box, leaving it long enough to hang the Floodlight Camera Pro using the provided hook.
  4. Connect Wires:
    • Connect the ground wire from the Floodlight Camera Pro to the house's ground wire.
    • Connect the live/neutral wire from the Floodlight Camera Pro to the live/neutral wire from the wire connector in the junction box respectively.

    Important: Green/green and yellow, brown and blue wires must connect to the matching colors. Never cross-connect. If you have problems with the proper operation, consult a licensed technician.

  5. Final Mount: Remove the hook, strings, and central screw from the junction box. Hold the mounting base, insert the central screw through its center, and screw it tightly. Use the central screw cap to cover the central screw to prevent rusting.
  6. Adjust Angle: Adjust the lighting angle for the best view (refer to Section 7).
  7. Final Steps: Remove the protective film from the Floodlight Cam Pro. Switch on the main circuit breaker in the house.
Mounting on the Ceiling:

Follow the same steps as mounting onto a wall, ensuring the central screw is inserted through the center of the mounting base and screwed tightly. Adjust the angle as needed.

Important: In case the Floodlight Camera is not powered on, switch off the circuit breaker before checking the wiring. Always be cautious when working with electricity. If uncomfortable, hire a professional electrician.

7. Operating Your Floodlight Cam Pro

7.1. App Control (SafeArk App)

Once your Floodlight Cam Pro is installed and connected to the SafeArk App, you can access its features:

  • Live View: Access real-time video feed from your camera.
  • Recording: View recorded footage stored on the Micro SD card or cloud (if subscribed).
  • Two-Way Audio: Use the microphone and speaker to communicate with visitors or deter intruders.
  • Motion Detection Alerts: Receive instant notifications on your phone when motion is detected.
  • AI Human/Vehicle Detection & Auto-Tracking: The camera can precisely detect humans and vehicles and automatically track their movement.

    Official product video showcasing features like motion-activated floodlight, AI human/vehicle detection, auto-tracking, 3K resolution, 6X zoom, and no monthly fees.

  • Color Night Vision: The 2600-Lumen smart floodlight provides clear, full-color images even in the dark.
    Dekco Floodlight Camera illuminating a driveway at night, highlighting 2600 Lumens, Color Night Vision, and Adjustable Brightness

    Dekco Floodlight Camera illuminating a driveway at night, highlighting 2600 Lumens, Color Night Vision, and Adjustable Brightness.

  • 360° View: The camera offers a total 360° view with 90° tilt, ensuring no blind spots.
    Diagram showing 360° pan and 90° tilt for total 360° view

    Diagram showing 360° pan and 90° tilt for total 360° view.

7.2. Adjusting the Lighting Angle

To adjust the floodlight angle, manually pull down the floodlight on the side to your desired position.

8. Maintenance

  • Cleaning: Periodically clean the camera lens and floodlight surfaces with a soft, damp cloth to ensure optimal image quality and light output.
  • Wiring Check: Regularly inspect all wiring connections for any signs of wear or damage. Ensure all connections remain tight and secure.
  • Firmware Updates: Check the SafeArk App for available firmware updates. Keeping your device's firmware up-to-date ensures optimal performance, security, and access to new features.
  • Environmental Protection: Do not use the device in extremely high or low temperatures. Avoid exposing the device to strong sunlight or excessively wet environments.

9. Troubleshooting

  • Camera Not Powered On: If the Floodlight Camera is not powering on after installation, switch off the circuit breaker. Carefully re-check all wiring connections. If you are uncomfortable with electrical wiring, consult a licensed electrician.
  • Status LED Not Solid Blue: A solid blue LED indicates the camera is operating correctly. If the LED is not solid blue, check the power connection and ensure the device has completed its startup sequence.
  • Blinking Blue LED (Wi-Fi Issue): If the Floodlight Cam Pro LED keeps blinking blue, it indicates a weak Wi-Fi signal. Ensure your Wi-Fi signal is strong at the camera's location. You may need to move your wireless router closer or use a Wi-Fi range extender.
  • Micro SD Card Not Recognized: Ensure the Micro SD card is inserted correctly and is formatted to FAT32. The card capacity should be between 8-128GB and Class 10 speed.
  • No Motion Detection Alerts: Check the motion detection settings in the SafeArk App. Ensure the detection zone is configured correctly and sensitivity is set appropriately.

10. Specifications

FeatureSpecification
Brand NameDEKCO
StyleDome Camera
High Definition5.0 Megapixels (3K UHD)
Megapixels3 MP
ConnectivityIP/Network Wireless (2.4G Wi-Fi)
Lens (mm)4mm
Optical Zoom4X
Zoom TypeOptical zoom
Viewing Angle110°
IR Distance (m)10m
Color Night VisionYes
AI FunctionsMotion Detection
Audio OutputTwo Way Audio
Movement Range (Pan)0°-360°
Movement Range (Tilt)0°-360°
SensorCMOS
Lens QuantitySingle Lens
Operating Temperature-10°-60°
Power ModeMains Electricity
Power SupplyNormal
InstallationWall Mounted, Vertical Pole Mount
Supported Mobile SystemsAndroid, iOS
Smart Home PlatformAlexa, Google Assistant
Special FeaturesWaterproof / Weatherproof
CertificationCE, FCC, RoHS, WEEE
Shell MaterialPlastic
ColorWHITE
Product Dimensions (approx.)Height: 199.5mm/7.85inch, Width: 244.0mm/9.60inch, Depth: 225.5mm/8.87inch
Package Weight (approx.)2.2 kg
Package Dimensions (approx.)Length: 28 cm, Width: 26 cm, Height: 26 cm

Note: Specifications are subject to change without notice.

Dimensions of the Floodlight Cam Pro

Dimensions of the Floodlight Cam Pro.

11. User Tips

  • For optimal performance, ensure your Wi-Fi router is placed as close as possible to the camera's installation location, or consider using a Wi-Fi range extender.
  • Always format your Micro SD card through the SafeArk app after inserting it into the camera to ensure proper recording functionality.
  • Regularly check the SafeArk app for new features and security updates to keep your camera performing at its best.

12. Warranty and Support

Warranty:

Your Dekco Floodlight Cam Pro comes with a 12-month limited warranty. The actual warranty period will be implemented according to local laws and regulations.

Customer Support:

  • Email: support@dekcolife.com
  • Phone Support (Mon-Fri 9AM-5PM):
    • United States and Canada: +1-877-277-5797 (PST)
    • United Kingdom: +44-20-3885-0802 (GMT)
    • Germany: +49-69-3109-0128 (CET)
    • Japan: +81-50-5840-2602 (JST)
  • Website: www.dekcolife.com
  • Facebook: @dekcolife
  • YouTube: @dekcolife

13. Compliance and Notice

Declaration of Conformity:

This product complies with the radio interference requirements of the European Community. Hereby, Dekco declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the full declaration of conformity, visit: https://www.dekcolife.com.

This product can be used across EU member states.

Do not use the device in environments with excessively high or low temperatures. Never expose the device to strong sunlight or overly wet conditions.

The suitable operating temperature for the camera and accessories is -20°C to 50°C.

RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirements, use a product that maintains a 20cm distance between the device and the human body.

For Camera: Wi-Fi Operating Frequency Range: 2412~2472MHz; Wi-Fi Max Output Power: 17.13dBm (EIRP).

Environmental Protection:

This product is designed and manufactured with high-quality materials and components that can be recycled and reused.

The WEEE symbol indicates that this product must not be discarded as household waste. It should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you purchased this product.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.