1. Introduction
Thank you for choosing the Baseus Inspire XH1 ANC Wireless Headphones. These headphones are designed to provide an immersive audio experience with advanced features such as -48dB Adaptive Active Noise Cancellation (ANC), Hi-Res Audio support with LDAC codec, Dolby Audio for 360° Sound Reality, and an impressive 100-hour battery life. Enjoy crystal-clear calls with 5-Mic AI ENC technology and superior comfort with Velvet-Like CloudComfort earcups.

2. Package Contents
Please check the package for the following items:
- Baseus Inspire XH1 Headphones x 1
- Charging Cable (USB-C) x 1
- 3.5mm AUX Cable x 1
- Quick Start Guide x 1
- Safety Instructions x 1
- Carrying Case x 1

3. Setup
3.1. Powering On/Off
- Press and hold the power button for 2 seconds.
- The indicator light will illuminate blue for 2 seconds, and the headphones will power on or off accordingly.
- When powered on, the headphones automatically enter pairing mode (indicated by a fast flashing blue light).
3.2. Wearing the Headphones
- Adjust the headband to fit comfortably over your head.
- Position the earcups over your ears, ensuring a secure and comfortable fit. The earcups are designed with Velvet-Like CloudComfort for extended wear.
3.3. Bluetooth Pairing
- Ensure the headphones are powered on and in pairing mode (blue light flashing quickly).
- On your mobile device, enable Bluetooth.
- Search for "Baseus Inspire XH1" in the list of available devices and select it to connect.
- The headphones will remember the last connected devices and automatically reconnect when powered on.
3.4. Multipoint Pairing
The Baseus Inspire XH1 headphones support multipoint connection, allowing you to connect to two devices simultaneously.
- Connect the headphones to Device A. Then, turn off Bluetooth on Device A.
- Connect the headphones to Device B.
- Turn on Bluetooth on Device A, and select "Baseus Inspire XH1" from the device list to connect. Your multipoint connection is now ready.

3.5. App Control
Enhance your experience by downloading the Baseus App. The app allows you to customize touch controls, manage sound modes, and access additional features.
- Scan the QR code below to download the Baseus App.
- Follow the in-app instructions to link your headphones and access custom settings.
- Ensure your headphones are near your device and the app is up to date for optimal performance.

4. Operating Instructions
4.1. Music & Call Controls
The headphones feature intuitive controls for managing your audio and calls:
| Action | Function |
|---|---|
| Single press (MFB) | Play/Pause music, Answer/End call |
| Press and hold (MFB) for 2s | Reject call |
| Single press (+) | Volume Up |
| Single press (-) | Volume Down |
| Press and hold (+) for 2s | Next Track |
| Press and hold (-) for 2s | Previous Track |
4.2. Sound Mode Controls
The headphones offer various sound modes for different listening environments:
| Button | Action | Function |
|---|---|---|
| ANC Button (x1) | Single press | Toggle Noise Cancelling Mode (ANC On / Transparency / ANC Off) |
| MFB Button (x2) | Double press | Toggle Dolby Spatial Sound (Off / On) |
| MFB Button (x3) | Triple press | Activate Voice Assistant |
Note: You can customize touch controls in the Baseus App.

4.3. Wired Mode
For a wired connection, use the included 3.5mm AUX cable.
- Connect one end of the 3.5mm AUX cable to the headphone's AUX port.
- Connect the other end to your playback device's audio output.
Note: Noise cancelling and on-headphone volume controls remain available in wired mode.
5. Charging Your Headphones
To charge your Baseus Inspire XH1 headphones, use the provided USB-C charging cable.
- Connect the USB-C end of the charging cable to the charging port on the headphones.
- Connect the USB-A end of the charging cable to a compatible power source (e.g., a USB wall adapter, computer USB port).
- The indicator light will pulse blue while charging.
- Once fully charged, the indicator light will turn solid blue.
For optimal charging speed, the power delivered by the charger should be between a minimum of 5 Watts and a maximum of 7.5 Watts.

6. Maintenance
To ensure the longevity and optimal performance of your headphones, follow these maintenance tips:
- Clean the earcups and headband regularly with a soft, dry cloth.
- Avoid exposing the headphones to extreme temperatures, humidity, or direct sunlight.
- Store the headphones in the provided carrying case when not in use to protect them from dust and scratches.
- Do not use abrasive cleaners or solvents on the headphones.
- Avoid dropping or subjecting the headphones to strong impacts.
7. Troubleshooting
7.1. Factory Reset
If you experience persistent issues with your headphones, a factory reset may resolve the problem:
- Ensure the headphones are powered on.
- Press and hold the "+" and "-" buttons simultaneously for approximately 5 seconds.
- The red light will flash three times, indicating that the headphones have been reset.
- This action will restore the headphones to their default settings and clear any custom settings in the Baseus App.
7.2. Common Issues
- Headphones not turning on: Ensure the headphones are fully charged.
- Cannot pair with device: Make sure Bluetooth is enabled on your device and the headphones are in pairing mode (fast flashing blue light). Try moving closer to your device.
- No sound or poor sound quality: Check the volume levels on both the headphones and your connected device. If using wired mode, ensure the 3.5mm AUX cable is securely connected. For Bluetooth, ensure the LDAC codec is active if supported by your device for the best quality.
- ANC not working effectively: Ensure ANC mode is activated via the ANC button or the Baseus App.
8. Specifications
| Feature | Specification |
|---|---|
| Name | Baseus Wireless Noise Cancelling Headphones |
| Model | A02036 |
| Material | Metal, ABS, Plastic |
| Weight | 853g |
| Input | 5V ≈ 1.1A |
| Battery Capacity | 800mAh |
| Full Charge Time | ≈ 1.5 hours |
| Playtime (ANC off) | Up to 100 hours |
| Playtime (ANC on) | Up to 65 hours |
| Frequency Response Range | 20 Hz - 40 kHz |
| Sensitivity | 48dB |
| Driver Diameter | 35mm |
| Charging Port | USB-C |
| Bluetooth Version | 6.1 |
| Bluetooth Max Output Power | 14.05 dBm |
| Frequency Band | 2402 MHz - 2480 MHz |
| Maximum Wireless Range | <10m |
| Codecs | AAC, SBC, LDAC |
| Features | Active Noise Cancelling, Dual Connection, Sound Isolating, Support APP |
| Certifications | CE, FCC, RoHS, KC |
*The above data is provided by the Baseus Lab; actual use may vary depending on specific circumstances.
9. User Tips
- Comfort with Glasses: Several users have noted the comfortable fit, even when wearing glasses, without excessive pressure.
- Sound Quality: The sound quality, especially when utilizing the LDAC codec, is highly praised for its clarity and powerful bass. For even better audio fidelity, consider using the headphones in wired mode.
- App Customization: Leverage the Baseus App to personalize touch controls and fine-tune sound settings to your preference.
- Value for Money: These headphones are frequently highlighted for their exceptional performance relative to their price point, especially when purchased on sale.
10. Warranty & Support
Baseus provides comprehensive support for its products:
- Warranty: 24-Month Warranty
- Technical Support: Lifetime Tech Support
For FAQs, detailed manuals, and more information, please visit the Baseus Support Center:
https://www.baseus.com/pages/support-center
If you need further assistance, please contact us:
- Email: care@baseus.com
- Phone (US): +1 800 220 8056
11. Safety Information
Please follow the safety instructions below to prevent fire, electric shock, damage, or other injuries:
- Battery Safety:
- Replacement of a battery with an incorrect type can defeat its safeguard (e.g., for certain lithium battery types).
- Disposing of a battery in a fire or a hot oven, or physically crushing or cutting it, can lead to explosions.
- Leaving a battery in an environment with extremely high temperatures can cause explosions or the leakage of flammable liquid or gas.
- Using a battery in an environment with extremely low air pressure may result in explosions or flammable liquid or gas leakage.
- There is a risk of fire or explosion if the battery is replaced with an incorrect type.
- Environmental Conditions: Avoid using the battery in extremely high or low temperatures and low air pressure at high altitudes during use, storage, or transportation.
- Temperature Ranges:
- During use: maximum 40°C (104°F)
- Storage: -20°C to 45°C (-4°F to 113°F)
- Transportation: 5°C to 35°C (41°F to 95°F)
12. Compliance Information
Bluetooth®: The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Shenzhen Baseus Technology Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.
Dolby Audio: Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 2020-2023 Dolby Laboratories. All rights reserved.
Sound by Bose: Sound by Bose is a trademark of Bose corporation, used under license by Baseus.
FCC ID: 2A482-A02036
Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Address: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen
Website: www.baseus.com