Ownice F3

Contents

Ownice F3 Car Android Radio Frame Instruction Manual

For BMW 1 Series (2017-2023) - 12.3 / 10.25 Inch Display Compatibility

1. Introduction

This manual provides detailed instructions for the installation and initial setup of the Ownice F3 Car Android Radio Frame, designed for BMW 1 Series vehicles manufactured between 2017 and 2023. This kit includes the frame, necessary wiring harness, and a CANbus box to facilitate the integration of an aftermarket Android head unit into your vehicle's dashboard.

Note: This product includes only the frame, wiring harness, and CANbus box. The Android head unit (screen) is not included and must be purchased separately.

Ownice F3 Car Android Radio Frame for BMW 1 Series

Image: Front view of the Ownice F3 Car Android Radio Frame, compatible with 12.3 / 10.25 inch displays.

2. Specifications

Feature Detail
Product Type Car Android Radio Frame (Fascia, Stereo Panel, Harness, Canbus Box)
Compatibility BMW 1 Series (2017 - 2023)
Screen Size Support 12.3 inch / 10.25 inch
Material Environment-friendly ABS plastic
Wiring Harness 16-pin connector, plug-and-play design
Package Dimensions 32 cm (L) x 12 cm (W) x 13 cm (H)
Package Weight 0.38 kg

3. Setup and Installation

The installation process involves connecting the wiring harness, integrating the CANbus box, and securing the frame in your vehicle's dashboard. This kit is designed for a plug-and-play installation without cutting original wires.

3.1. Pre-Installation Check

  • Ensure your aftermarket Android head unit uses a standard 16-pin connector for compatibility with the provided wiring harness.
  • Verify that your vehicle is a BMW 1 Series model from 2017 to 2023.
  • Confirm the screen size of your Android head unit is either 12.3 inches or 10.25 inches to fit the frame.

3.2. Wiring Harness Connection

The provided 16-pin wiring harness connects your Android head unit to the vehicle's electrical system. This harness is designed to match the standard pin definition for car audio and navigation solutions.

16-pin wiring harness diagram for Android head unit

Image: Diagram illustrating the 16-pin connector and its pin assignments (B+, GND, ILL, KEY2, ACC, REVERSE, ANT, KEY1, FUSE, RL-, RL+, FR-, FR+, RR-, RR+, FL-, FL+).

3.3. CANbus Box Integration and Settings

The CANbus box ensures proper communication between your Android head unit and the vehicle's systems, such as steering wheel controls and vehicle information display.

  1. Connect the CANbus Plug: Plug the 8-pin CAN plug into the designated socket on the wiring harness or Android head unit, as shown in the diagram below.
  2. Access Factory Settings: On your Android head unit, navigate to the "Settings" menu, then find "Factory Settings".
  3. Enter Password: You may be prompted for a password. Common passwords are "1260" or "123456". If these do not work, consult your Android head unit's manual or contact the seller for the correct password.
  4. Select CANbus Model: Within Factory Settings, select "Models" and then choose the correct CANbus Brand and the specific Car Model Year Version for your BMW 1 Series (2017-2023).
  5. Save and Reboot: Save your settings and reboot the Android head unit for the changes to take effect. It is recommended to update to the latest MCU (Microcontroller Unit) firmware if available.
Before and after installation of the Android radio frame in a BMW 1 Series dashboard, showing NBT and EVO systems, and CANbus connection point with Android settings menu.

Image: Visual guide showing the original BMW 1 Series dashboard (NBT and EVO systems), the CANbus plug connection, and the Android head unit's settings interface for CANbus configuration.

3.4. Frame Installation

Once the wiring and CANbus are connected, carefully install the frame into the dashboard opening. The frame is designed for a 1:1 fit with the original car radio installation part, ensuring a seamless integration.

Rear view of the Ownice F3 Car Android Radio Frame, showing mounting points

Image: Rear view of the Ownice F3 Car Android Radio Frame, highlighting its structure and mounting points for installation.

4. Operating Instructions

This product is an installation kit (frame, harness, CANbus) for an aftermarket Android head unit. Therefore, specific operating instructions for the Android system itself will be provided with your Android head unit. This kit ensures that the Android head unit functions correctly within your BMW 1 Series vehicle, enabling features like steering wheel controls and proper display integration.

5. Maintenance

The Ownice F3 Car Android Radio Frame is made from durable ABS plastic and requires minimal maintenance. To ensure longevity:

  • Keep the frame clean by wiping it with a soft, dry cloth.
  • Avoid using harsh chemicals or abrasive cleaners, which can damage the plastic finish.
  • Ensure all connections remain secure over time. If you experience any issues, recheck the wiring and CANbus connections.

6. Troubleshooting

If you encounter issues after installation, consider the following:

  • Android Head Unit Not Powering On:
    • Check all 16-pin wiring harness connections to ensure they are secure.
    • Verify the vehicle's fuse for the radio/multimedia system.
  • Steering Wheel Controls Not Working / CANbus Issues:
    • Recheck the 8-pin CANbus plug connection.
    • Ensure the correct CANbus Brand and Car Model Year Version are selected in the Android head unit's Factory Settings (refer to Section 3.3).
    • Consider updating the Android head unit's MCU firmware if available.
  • Incorrect Display or Functionality:
    • Confirm that your Android head unit is compatible with the provided wiring harness (16-pin connector).
    • Ensure the screen size (12.3 or 10.25 inches) matches the frame.
  • General Compatibility Concerns:

    While designed for specific models, minor variations can occur. If you experience persistent compatibility problems, please contact the seller for assistance.

7. User Tips

  • Always double-check the compatibility of your Android head unit's connector (must be 16-pin) and screen size (12.3 or 10.25 inches) before purchasing and installing.
  • When configuring CANbus settings, carefully select the exact model and year of your BMW 1 Series to ensure all vehicle functions integrate correctly.
  • If you are unsure about any step of the installation, it is advisable to seek professional assistance to avoid damage to your vehicle or the product.

8. Warranty and Support

For any installation difficulties or product-related inquiries, please contact the seller directly. They specialize in these systems and are equipped to provide support.

For detailed warranty information, please refer to the terms provided by your seller at the time of purchase. A user manual in PDF format is also available for download from the product page or by contacting the seller.

Reference PDF: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.