XOSS G+ Gen.3

Contents

XOSS G+ Gen.3 GPS Bike Computer User Manual

Model: G+ Gen.3 | Brand: XOSS

1. Introduction

The XOSS G+ Gen.3 is an advanced GPS bike computer designed to provide comprehensive cycling data. Featuring a larger, customizable display and enhanced connectivity, it helps cyclists track their performance with precision. This manual will guide you through the installation, setup, operation, and maintenance of your device.

XOSS G+ Gen.3 GPS Bike Computer compared to older model
XOSS G+ Gen.3 GPS Bike Computer (right) offers a larger display compared to the previous generation (left).

2. What's in the Box

Please check the package contents upon unboxing:

  • XOSS G+ Gen.3 Cycling Computer x 1
  • Cycling Computer Mount x 1
  • Type-C USB Cable x 1
  • Protection Rubber Pad x 1
  • Rubber Band x 2
  • User Manual x 1
Contents of the XOSS G+ Gen.3 package
Ensure all listed items are present in your package.

3. Installation

Follow these steps to securely install your XOSS G+ Gen.3 Bike Computer:

  1. Place the protection rubber pad on the back of the bike computer mount.
  2. Use the provided rubber bands to secure the mount to your bicycle's handlebar or stem.
  3. Align the tabs on the back of the G+ Gen.3 device with the grooves on the bike mount.
  4. Press down slightly and rotate the device 90 degrees until it locks firmly into place.
Diagram showing the installation steps for the XOSS G+ Gen.3 bike computer mount
Installation diagram for the bike computer mount.

4. Initial Setup

4.1 GPS Positioning

For accurate data recording, ensure proper GPS signal acquisition:

  1. Long press the right button to turn on the device.
  2. Short press the left button to start searching for GPS. The GPS icon will appear and flash.
  3. After startup, remain stationary for a few minutes to acquire a strong GPS signal.
  4. When the GPS icon stops flashing and you hear a BEEP prompt, the device is ready for use.

Note: When searching for a GPS signal, ensure your device is in an open, barrier-free area. The device only supports outdoor recording.

Diagram illustrating GPS positioning and button functions on the XOSS G+ Gen.3
GPS positioning and button layout.

4.2 Connecting to XOSS APP

The XOSS APP allows for ride data analysis, settings customization, and firmware updates.

  1. Search for "XOSS" in Google Play Store or Apple App Store, or scan the QR code provided in the manual to download the app.
  2. Turn on your XOSS G+ Gen.3 and ensure your phone's Bluetooth is enabled.
  3. Open the XOSS APP, navigate to Devices > Bike Computers > G/G+.
  4. Once connected, you can customize settings such as Backlight, Key Tone, Auto Pause, Speed Alert, Tire Circumference, Units, Time Zone, and more. Workout data will automatically sync to the XOSS APP.

Note: The App is designed for Bluetooth 4.0 or later versions. Long press the left button on the device to end recording before connecting to the app.

Screenshot of the XOSS App interface showing device connection and settings
Connect your device to the XOSS App for advanced features and data management.

5. Operation

5.1 Button Functions

  • Left Button:
    • Long Press: End recording.
    • Short Press: Start / Pause / Resume recording.
  • Right Button:
    • Long Press: Power on / Off.
    • Short Press: Switch data display pages.
  • Middle Button (X Button): This is a customizable function button. It can be used for:
    • Starting lap counting.
    • Controlling headlight and taillight switches.
    • Toggling between different light modes.
    More customization options are available in the XOSS app.
Diagram highlighting the customizable 'X' button on the XOSS G+ Gen.3
The 'X' button offers customizable functions for enhanced control.

5.2 Customizable Display

The XOSS G+ Gen.3 features a customizable display, allowing you to view up to 13 data items per page. You can configure which data fields are shown via the XOSS app under the 'Data Layout' settings. The device also supports multiple viewing modes, which can be easily switched with a short press of the right button.

Screenshots showing customizable data display layouts on the XOSS G+ Gen.3
The G+ Gen.3 allows for comprehensive data display with up to 13 items per page.

5.3 Lap Counting

The G+ Gen.3 supports four types of lap counting:

  • Time-Based: Automatically counts a lap when a set time interval is reached.
  • Distance-Based: Automatically counts a lap when a set distance is reached.
  • Location-Based: Press the middle button to mark a location. The computer will automatically count a lap each time it reaches the marked location.
  • Manual: Press the middle button once to complete a lap and start the next.

Note: All four lap counting modes require successful GPS positioning to start. Long press the left button to end laps.

5.4 Managing Workouts

To manage your recorded workouts:

  1. Connect your G+ Gen.3 to the XOSS APP.
  2. In the app, click Storage > Workout.
  3. Click Edit in the upper right corner to select and manage (delete or resync) your workouts.

6. ANT+ Sensor Connection

The XOSS G+ Gen.3 supports connection with various ANT+ sensors, including headlights, taillights, power meters, speed sensors, cadence sensors, and heart rate sensors.

Diagram showing XOSS G+ Gen.3 connected to various bike sensors like headlight, taillight, speed, cadence, and heart rate
Connect external sensors for comprehensive ride data.

To connect ANT+ sensors:

  1. Bring the G+ Gen.3 device within 3 meters of your sensors and keep it at least 10 meters away from other riders' sensors to avoid interference.
  2. Press both the left and right buttons simultaneously on the XOSS G+ Gen.3 until the ANT+ icon starts flashing. This indicates the device is searching for active sensors nearby.
  3. If the pairing is successful, the ANT+ icon will become static.
  4. Press the right button again to enter the "Tire Circumference" setting interface, if needed.
Steps for ANT+ sensor connection on the XOSS G+ Gen.3
Follow these steps to pair your ANT+ sensors.

7. Device Settings

You can adjust various settings directly on the device or through the XOSS APP.

7.1 Settings on Device

After connecting ANT+ sensors, you may enter the settings menu:

  • Tire Circumference Setting (P1):
    • Press the left button to set numbers.
    • Press the right button to switch position.
    • Long press the right button to proceed to the next step.
  • Metric/Imperial Unit Setting (P2):
    • Press the left button to switch units (e.g., km/h or mph).
    • Long press the right button to proceed to the next step.
  • Time Zone Setting (P3):
    • Press the left button to switch numbers.
    • Press the right button to switch position.
    • Long press the right button to end setting.
Screenshots showing device settings for tire circumference, metric/imperial units, and time zone
Adjust key settings directly on your G+ Gen.3 device.

7.2 Time Zone Setting in XOSS APP

For easier time zone management:

  1. Connect your G+ Gen.3 to the XOSS APP.
  2. Navigate to Settings > User Profile > Time Zone.
  3. The device will sync its time zone with your phone's time zone.

8. Firmware Upgrade

When new firmware is available, the XOSS APP will prompt you to update it. It is recommended to keep your device updated to the latest firmware for optimal performance and new features.

Troubleshooting Firmware Update: If you get stuck at "dFu" during the firmware upgrade, try toggling Bluetooth off and back on again in your phone's settings, then reconnect the XOSS APP to attempt the upgrade again.

Image showing a firmware upgrade screen on the XOSS G+ Gen.3
Keep your device updated for the best experience.

9. Specifications

FeatureDetail
Product NameXOSS G+ Smart GPS Cycling Computer
Model NumberG+ Gen.3
Display Size2.8 inches
Display ColorBlack and White
Dimensions55.6mm x 86.2mm x 18.4mm
Product Weight58.5g
Operating Temperature-10°C ~ 50°C
Endurance Time40 hours
Battery600mAh Rechargeable Lithium Ion
Charging InterfaceType-C USB
Waterproof LevelIPX7
ANT+ Sensor SupportSpeed Sensor, Heart Rate Monitor, Speed/Cadence Sensor, Power Meter
Data Display Types50 types (e.g., Speed, HR, Power, Cadence, Time, Distance, Elevation, Calories)
Automatic FeaturesAutomatic sleep, Auto-pause
Touch ScreenNo
NavigationNo
Graphic illustrating 40 hours of battery life for the XOSS G+ Gen.3
Enjoy extended rides with up to 40 hours of battery life.

10. Maintenance

To ensure the longevity and optimal performance of your XOSS G+ Gen.3:

  • Clean the device regularly with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
  • Ensure the Type-C charging port cover is properly sealed when not charging to maintain its IPX7 waterproof rating.
  • Store the device in a cool, dry place when not in use.
  • Charge the device fully before long periods of storage to preserve battery health.

11. Troubleshooting

  • GPS Signal Acquisition Issues: Ensure you are in an open, outdoor area. Remain stationary for a few minutes after turning on the device to allow it to acquire a signal. The app also has an option to refresh satellite data.
  • Device Not Turning On: Ensure the battery is charged. Connect the device to the Type-C USB cable and a power source.
  • ANT+ Sensor Connection Failure: Make sure sensors are active and within 3 meters of the bike computer. Keep away from other devices that might cause interference.
  • Firmware Update Stuck at 'dFu': Toggle your phone's Bluetooth off and on, then try reconnecting the XOSS APP and restarting the update.
  • Indoor Trainer Distance Not Recording: The device primarily uses GPS for distance. For indoor training on a roller, you will need external speed and/or cadence sensors connected via ANT+ to accurately track distance.
  • Screen Illumination for Night Riding: The device has a backlight for visibility in low light conditions. The customizable 'X' button can also be configured to control compatible external bike lights.

12. User Tips

  • Faster GPS Lock: Users report quicker satellite acquisition compared to previous models. The XOSS app also includes a feature to refresh satellite data, which can improve lock times.
  • Enhanced Visibility: The larger screen provides excellent readability, even with sunglasses.
  • Battery Life: The 40-hour battery life is a significant improvement, allowing for extended rides without frequent charging. Charging is conveniently done via USB-C.
  • App Integration: The XOSS app is highly functional, offering valuable training data analysis and seamless synchronization with platforms like Strava.
  • Safety First: It is highly recommended to use a safety cord with your bike computer, even when using a rigid mount, to prevent accidental drops.
  • Customization: Take advantage of the customizable display and the 'X' button functions through the XOSS app to tailor the device to your specific needs.

13. Warranty & Support

13.1 After-sales Service & Warranty

The XOSS G+ Gen.3 comes with a one-year free warranty from the date of purchase. Please contact your original dealer for warranty service.

The following conditions are not covered by the warranty:

  • Normal aging and loss of battery capacity.
  • Damage or loss of products due to improper installation.
  • Damage caused by abnormal use, such as exposure to high temperatures or water damage beyond its IPX7 rating.
  • Damage caused by unauthorized dismantling or maintenance by non-certified personnel.

13.2 Support

For more product information, support, and FAQs, please visit the official XOSS websites:

You can also refer to the official user manual PDF for detailed instructions: XOSS G+ Gen.3 User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.