Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Hippcron 7-inch Portable Car Multimedia Player. Please read this manual thoroughly before using the product to ensure proper functionality and safety.
Figure 1: Hippcron 7-inch Portable Car Multimedia Player with CarPlay interface displayed.
Important Safety Information
Please carefully read the following instructions to ensure safe and optimal use of your device.
- Always plan the optimal location for fixing the device to avoid obstructing your view or interfering with vehicle controls.
- When connecting a camera, ensure it corresponds to the body identification for correct functionality.
- Regularly clean up the storage space for efficient and secure file storage.
- Product structure and parameters may be improved over time. Graphics and text in this manual are for reference only. Refer to the actual product display if there are discrepancies.
FCC Compliance and Interference
- If this device causes harmful interference to radio or television reception, try the following measures:
- Adjust or reposition the receiving antenna.
- Increase the distance between the device and the receiver.
- Connect the device to an outlet on a different circuit from the receiver.
- Consult a dealer or experienced radio/TV technician for assistance.
- Any changes or modifications not explicitly approved by the manufacturer could void your authority to operate this device.
- The device must accept any received interference, including interference that may cause unexpected operations.
- This device complies with FCC radiation exposure limits for uncontrolled environments. Maintain a distance of at least 20cm between the device and your body during installation and operation.
Disclaimer
- Android Auto and Google Play are trademarks of Google Inc. Apple, Apple CarPlay, and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
- Use of the Apple CarPlay logo indicates that the vehicle user interface meets Apple performance standards. Apple is not responsible for the operation of this vehicle or its compliance with safety and regulatory standards.
Specifications
| Feature | Description |
|---|---|
| Display Size | 7" |
| Resolution | 1024*600 |
| Operating System | Linux |
| Is Touch Screen | Yes |
| Din | Double Din |
| Voltage | 12 V (Power supply voltage: 12V~30V DC) |
| Item Weight | 0.6kg |
| Max External Memory | 64G (for TF/Micro SD Slot) |
| TF/Micro SD Slot | 1 |
| Interface | Cigarette lighter power cord |
| Special Features | Built-In Speaker/Microphone, CarPlay, Android Auto, Reversing Input |
| Digital Media Format | Mp3, MP4, WMA, JPEG (Audio/video support formats: AVI, MKV, QT, MPG, ASF, FLV, RMVB, MP3, WMA, ACC, WAVE, FLAC, APE, OGG. Image supported formats: BMP/GIF/JPG/PNG) |
| OSD Language | Chinese (Simplified), French, Korean, Dutch, Japanese, Spanish, English |
| Output Type | Colored |
| For Vehicle Brands/Model | Universal |
| Certification | CE, FCC |
| Package Weight | 0.801kg |
| Package Dimensions | 25cm (L) x 23cm (W) x 12cm (H) |
Ports and Controls
The device features various ports and controls for connectivity and operation.
Figure 2: Side view of the device illustrating the various input/output ports and control buttons.
| Port/Control | Function |
|---|---|
| AV IN (CAM IN) | Video input interface for reversing camera (2.5mm plug to RCA cable). |
| USB Port | Connect USB devices for music, video, pictures. Supports Mirrorlink, CarPlay, Android Auto. (Some models may not include a USB interface or may support Type-C). |
| TF Card Slot | Insert TF card for music, video, and pictures (supported by some models). |
| AUX Out | Output audio to other equipment via 3.5mm AUX cable (supported by some models). |
| IR | Remote control signal receiver (only some models have remote control). |
| DC IN | 3.5mm power cord plug (some models are Type-C power plug). |
| MIC IN | 3.5mm microphone jack for external lavalier microphone (supported by some models). |
| V-OUT | Output video signal to other monitor devices via 3.5mm AUX cable (supported by some models). |
| POWER Button | Power on/off (supported by some models). |
Note: The availability and style of interfaces and accessories may vary by model. Refer to your specific product for exact details.
Setup and Installation
Mounting the Device
The device comes with different mounting brackets. The actual bracket received will determine the installation method.
Installation Method 1: Glass Suction Cup Type Suspension Installation
This method uses a suction cup bracket to mount the device, typically on the windshield or dashboard. The bracket connects to the host unit, allowing for adjustable positioning.
Installation Method 2: Desktop Horizontal Installation
This method uses a fixed bracket for horizontal placement on a flat surface, such as the dashboard. The bracket connects to the host unit, providing a stable base.
The bracket style is subject to the actual product style. The images in the original manual are for reference only.
Power Connection: Cigarette Lighter Power Plug
This device is powered via the cigarette lighter power plug. After installation, insert the power plug into your vehicle's cigarette lighter socket to power on the device.
- Power Supply Voltage: 12V~30V DC. The actual voltage range may vary by product model.
- Important Note: Use the standard cigarette lighter charger. If using a non-original charger, ensure it is a high-quality charger that meets safety standards. Failure to do so may damage the device or cause hazards due to insufficient voltage, overheating, or improper FM transmission.
Figure 3: Device powered via cigarette lighter, showing a dedicated USB port for phone quick charge.
Reversing Camera Connection (CCD)
The reversing video input connects via an RCA adapter cable. When a signal is detected, the LCD automatically switches to the camera view. (Camera is purchased separately).
- Connect the yellow line (extension line of the rearview camera) from the camera to the portable car player.
- The red short line at the end of the extension line is the reversing trigger line. Connect this to the power line of the reversing light. When reversing, the rearview camera will be triggered.
Safety Warning: When driving normally, avoid turning on the rearview camera to prevent distraction.
Operating Instructions
Product Demonstration Video
Video 1: A comprehensive demonstration of the product's user interface, including navigation, wired and wireless CarPlay, Mirror Link, Bluetooth calling, U-disk playback, and reverse image display.
Bluetooth (BT) Pairing Connection
To use BT music or BT calls, you must first pair your device via Bluetooth.
- Click the settings icon to enter the settings page, then click the BT icon to enter the BT connection page.
- Search for the device's BT name. Your phone will display a matching code. Click and confirm to match and connect. Common PIN numbers: "0000", "1234", "123456", or "88888888" (if required).
- If the car is not paired, go to Phone > Settings > BT > Search for Device. Find the BT name "CAR***" of the host to connect. Your phone will prompt for a PIN code (use the one from the settings interface) or confirm directly. A "Phone Device Name" message will indicate successful connection.
BT Music Playback Function
Once connected, you can use the BT music playback interface to play songs from your phone. Ensure music is playing on your phone first.
- Controls: Playback/pause, skip forward/backward.
Call Function
- Dialing: Input the phone number on the interface. Use the delete button if incorrect. Press the call button to dial.
- Ending Call: Press the end call button to terminate the current call.
- Telephone Directory: Enter the phone book interface. Click the [Sync Contact] button to synchronize contacts. Search for contacts by entering English letters in the search box.
Audio Output Methods
The device offers three ways to output audio:
Figure 4: Visual representation of the three audio output methods available on the device.
- Built-in Speaker: The device has a built-in speaker for audio output. If you wish for louder sound, you can transfer the audio to your car's speakers using other methods.
- FM Transmit:
- Select FM transmission mode. Tune the device to an unoccupied FM frequency (e.g., FM106.0MHz).
- Adjust your original car radio to the same FM frequency. All audio from the device will then be transmitted to your car speakers via FM.
- Note: For optimal sound, use an unoccupied frequency band. Some models may have an "ON" button for FM Transmission; ensure it's enabled. Volume control must be done via the car's system when using FM transmit.
- AUX Output: Connect an AUX cable (3.5mm) from the device to your car's original player (supported by some models).
Mirror Link Function
Mirror Link allows you to display your phone's screen on the device. Compatibility may vary by phone model and connection type.
1. Wired Mirror Link (Supported by some models)
- Connect your mobile phone to the device using its original cable.
- When prompted on your phone, select "trust" to allow the full HD display of video or images.
- Connect via Bluetooth for successful sound transmission. Some models may require mobile app installation and authorization.
Figure 5: Wired Mirror Link connection for both iPhone and Android devices, enabling screen casting.
2. Wireless Mirror Link (Supported by some models)
- Use your mobile phone to wirelessly search for and connect to the device.
- For Android: Download the prompted APP, grant necessary authorizations, then select the wireless search device and connect.
- For iPhone: Wirelessly connect your phone and select 'Car - AirPlay' from 'Screen Mirroring'.
Apple CarPlay (Wired & Wireless)
CarPlay allows seamless integration of your iPhone with the car player. Refer to your specific model's specifications as some models may not support wireless connections.
Figure 6: Wired and Wireless connection methods for CarPlay and Android Auto.
1. Wired Connection
- Connect your iPhone to the USB port using an original or certified Apple cable.
2. Wireless Connection
- First, enable Bluetooth and Wi-Fi on your mobile phone, then connect via Bluetooth. The device will automatically enter the CarPlay interface.
- Note: The signal is transmitted via Wi-Fi. If Wi-Fi is turned off, CarPlay will disconnect.
Android Auto (Wired & Wireless)
Android Auto integrates your Android phone with the car player. This feature may not be supported in all countries, and Google Play services must be available locally. A mobile phone with Android 10.0 or higher is required.
1. Wired Connection
- Connect your Android phone to the USB port using a valid data cable. The device will automatically enter the Android Auto interface.
2. Wireless Connection
- First, enable Bluetooth and Wi-Fi on your mobile phone, then connect via Bluetooth. The device will automatically enter the Android Auto interface.
- Note: The signal is transmitted via Wi-Fi. If Wi-Fi is turned off, Android Auto will disconnect.
TF Card Playback
Insert a TF card into the TF Card Slot to play audio and video files. Supported formats include AVI, MKV, QT, MPG, ASF, FLV, RMVB, MP3, WMA, ACC, WAVE, FLAC, APE, OGG for audio/video, and BMP, GIF, JPG, PNG for images.
- Capacity: Use 8G or 16G TF cards. Some large-capacity storage devices may not be supported.
- Formatting: Format the storage device using the FAT32 file system. Some formats may not be compatible; use common formats.
Settings
Factory Set
This section is for professional maintenance only and not intended for end-users. It includes password protection.
Sound Setup
You can adjust the sound effect parameters to suit your preferences.
Language Setting
Multiple languages are available. You can freely change the language. The default language is English.
Time Setup
Linking your iPhone will automatically synchronize the time. Android Auto does not support time synchronization, so you can set the time manually, and the system will record it.
Troubleshooting
1. Poor FM Transmitter Signal / High Noise Interference
If the FM transmission signal is weak or noisy, ensure the car radio is functioning correctly, the antenna is properly inserted, and the wiring harness is organized to avoid interference within the frequency band.
2. Wireless CarPlay Disconnects or Fails
When using CarPlay, ensure your phone is not connected to other wireless networks to prevent disconnections.
3. Unstable Bracket / Suction Cup Adhesion
When attaching the bracket, ensure the pasting area is clean and dry to prevent bubbles and unstable adhesion, especially in high temperatures.
4. Bluetooth Not Synchronized / No Sound / Noise During Calls
Ensure the microphone position is not blocked by foreign objects. If Bluetooth is not synchronizing, delete the paired device on your mobile phone and re-search for the BT device. After successful pairing, it should function normally.
5. MirrorLink Connection Issues
Before connecting, select the "PhoneLink" function on the device, then choose "Mirror" mode. Connect your mobile phone with a data cable and authorize the connection on your phone.
6. No Sound from Car Speakers
- The device's built-in speaker can emit sound; you can turn it off in system settings if desired.
- To transmit sound to the car radio via FM: Select an FM frequency (e.g., 86.3MHz) on the device, play USB music, then tune your car radio to the same frequency. Some models may require enabling an "ON" switch for FM transmitting.
- Transmit audio to the car player via the AUX OUT (3.5MM) interface (if available on your model).
7. Cannot Automatically Connect with CarPlay or Android Auto
- Wired Connection: Set CarPlay or Android Auto as the default connection mode in the Phonelink settings. It will then automatically jump to the respective interface when USB is connected.
- Wireless Connection: Ensure Wi-Fi is enabled on your mobile phone. Once Bluetooth is connected, it should automatically jump to the CarPlay or Android Auto interface.
8. Low Music Playback or Call Volume
Press and hold your finger on the top of the screen and slide down to pull down the status bar. Adjust the playback volume. During a call, return to the main interface and pull down the status bar to adjust the call volume.
9. Time and Date Not Remembered
The machine does not have a built-in battery to remember time and date. After connecting to a mobile phone, the time and date will be automatically updated.
User Tips
- For the best audio experience, always try to use the AUX output if your car supports it, as FM transmission can sometimes be prone to interference.
- When using wireless CarPlay or Android Auto, ensure your phone's Wi-Fi is active for a stable connection, even if the initial connection is via Bluetooth.
- If you experience any lag or unresponsiveness, try restarting the device and your connected phone.
Warranty and Support
Thank you for choosing our product. If you have further questions or require assistance, please contact customer service.
Product UI and functions may be modified and upgraded periodically without prior notice. Any discrepancies in this manual are normal due to ongoing product improvements.
For additional information and detailed guides, you may refer to the official user manual PDF available at: User Manual (PDF).