VGR V-035C

Contents

VGR Professional Hair Trimmer User Manual

Model: V-035C

1. Important Safety Information

Please read all instructions carefully before using the VGR Professional Hair Trimmer. Failure to follow these instructions may result in product damage or personal injury. Keep this manual for future reference.

  • Child Safety: Keep the device and its cord out of reach of children under 3 years old. Keep away from children unless supervised by an adult.
  • Intended Use: Do not use this product for purposes other than its intended use (hair trimming).
  • Inspection: Inspect the product before each use. Do not use if the device or any part of it is damaged.
  • Operation: Always follow installation and operation guidelines to avoid injury.
  • Water Exposure: Do not expose the device to water or moisture, except for the blades which are designed for washing under water. Ensure the main body is dry.
  • Handling: Handle the blades with care to avoid cuts or injuries.

2. Package Contents

Carefully unpack the box and ensure all items are present and in good condition. If any items are missing or damaged, please contact customer support.

V-035C Kit Includes:

  • 1 x Hair Clipper (V-035C)
  • 6 x Cutting Guide Combs (1.5mm, 3mm, 4.5mm, 6mm, 10mm, 13mm)
  • 1 x USB Charging Cable (Type-C)
  • 1 x Cleaning Brush
  • 1 x Protective Cap
  • 1 x Instruction Manual
  • 1 x Charging Base
  • 2 x Machine Housing (Extra Covers)
  • 1 x Screwdriver
VGR V-035C Hair Trimmer complete kit contents

Figure 1: VGR V-035C Hair Trimmer complete kit contents.

3. Product Overview

The VGR Professional Hair Trimmer V-035C is designed for precise and efficient hair cutting. It features a powerful vector motor, durable DLC-coated blades, and a convenient LED display.

VGR V-035C Hair Trimmer in black, teal, and pink

Figure 2: VGR V-035C Hair Trimmer models.

Key Features:

  • Vector Motor: High-speed motor (9000-11000 RPM for V-035C) that automatically adjusts power based on hair density for consistent cutting.
  • DLC Coated Blades: Diamond-Like Carbon coated blades for superior sharpness, durability, and smooth cutting.
  • LED Display: Shows battery percentage and charging status.
  • USB-C Charging: Convenient charging via USB Type-C cable or charging base.
  • Lithium Battery: Long-lasting 3000mAh battery for extended cordless operation.
  • Taper Lever: Adjustable lever for precise cutting length adjustments (0.8mm to 2.0mm).
  • Cord/Cordless Operation: Can be used with or without the cord.
  • Washable Blades: Blades can be rinsed under water for easy cleaning.
Internal view of VGR trimmer showing Vector Motor and DLC Blade

Figure 3: Vector Motor and DLC Coating Blade.

Diagram explaining Vector Motor operation

Figure 4: How the Vector Motor works.

4. Setup

4.1 First Use & Charging

  1. Before first use, remove all protective films from the device and blades.
  2. Connect the provided USB Type-C cable to the trimmer directly or to the charging base.
  3. Plug the other end of the USB cable into a certified 5V power adapter (not included).
  4. The LED display will show the charging status. A full charge takes approximately 3 hours for the V-035C model.
  5. For optimal battery life, fully charge the trimmer before its first use.

4.2 Attaching Guide Combs

Select the desired cutting length from the provided guide combs (1.5mm, 3mm, 4.5mm, 6mm, 10mm, 13mm).

  1. Ensure the trimmer is turned off.
  2. Align the guide comb with the trimmer blade.
  3. Push the comb firmly until it clicks into place.
  4. To remove, gently pull the comb away from the blade.
Guide combs for VGR hair trimmer

Figure 5: Attaching guide combs.

4.3 Replacing Housing Units (Extra Covers)

The VGR trimmer comes with two additional housing units, allowing you to customize its appearance.

  1. Ensure the trimmer is turned off.
  2. Using the provided screwdriver, carefully remove the screws holding the current housing unit in place.
  3. Gently detach the housing unit.
  4. Place the new housing unit onto the trimmer, aligning it correctly.
  5. Secure the new housing unit with the screws using the screwdriver.
Replaceable extra covers for VGR trimmer

Figure 6: Replacing housing units.

5. Operating Instructions

5.1 Power On/Off

  • To turn on the trimmer, press and hold the power button for approximately 3 seconds. The LED display will illuminate.
  • To turn off the trimmer, press and hold the power button again for approximately 3 seconds.

5.2 Adjusting Cutting Length

  • Guide Combs: For specific hair lengths, attach the appropriate guide comb as described in Section 4.2.
  • Taper Lever: Use the adjustable taper lever on the side of the trimmer for fine-tuning cutting lengths between 0.8mm and 2.0mm without a guide comb, or to blend hair. Move the lever up for a shorter cut and down for a longer cut.

5.3 Trimming Hair

  1. Ensure hair is clean and dry for best results.
  2. Select the desired guide comb and attach it securely.
  3. Turn on the trimmer.
  4. Start trimming from the bottom of the head, moving the trimmer against the direction of hair growth.
  5. Use slow, even strokes.
  6. For detailing or very short cuts, remove the guide comb and use the taper lever to adjust the blade length.

Video 1: VGR Hair Trimmer product showcase and usage demonstration.

6. Maintenance

6.1 Cleaning the Blades

  1. Ensure the trimmer is turned off and unplugged.
  2. Remove any attached guide comb.
  3. Use the provided cleaning brush to brush away loose hair from the blades.
  4. The blades can be rinsed under running water. Ensure the main body of the trimmer does not get wet.
  5. After rinsing, shake off excess water and allow the blades to air dry completely before reattaching or storing.

6.2 Lubrication

To maintain optimal performance and blade longevity, it is recommended to oil the blades regularly (after every few uses).

  • Apply a few drops of clipper oil (not included due to shipping regulations) to the teeth and sides of the blades.
  • Turn on the trimmer for a few seconds to distribute the oil evenly.
  • Wipe off any excess oil with a soft cloth.

6.3 Storage

  • Ensure the trimmer is clean, dry, and turned off before storing.
  • Store the trimmer in a cool, dry place, away from direct sunlight and moisture.
  • Keep the protective cap on the blades to prevent damage.
  • Store out of reach of children.

7. Troubleshooting

  • Trimmer not turning on: Ensure the battery is charged. Connect to the charger and check the LED display.
  • Poor cutting performance: Clean the blades thoroughly to remove any hair buildup. Lubricate the blades with clipper oil. Ensure the guide comb is properly attached.
  • Unusual noise: Clean and lubricate the blades. If the noise persists, contact customer support.

8. Specifications

VGR V-035C Product Specifications

Figure 7: V-035C Product Specifications.

VGR V-035T Product Specifications

Figure 8: V-035T Product Specifications.

FeatureV-035CV-035T
Product NameHair Clipper
Power SupplyUSB
Battery Capacity3000 mAh2000 mAh
Rated Input5V ⎓ 1A
Charging Time3 hours2.5 hours
Working Time (Full Charge)180 mins150 mins
Blade MaterialDLC Coating Blades (Carbon Steel)
Motor TypeVector Motor
Range of Speeds9000-11000 RPM8000-10000 RPM
Guide Combs1.5 / 3 / 4.5 / 6 / 10 / 13 mm1.5 / 3 / 6 mm
Taper Lever Adjustment0.8 - 2.0 mm
VoltageGlobal Universal (100-240V)
Power5W
Certification3C, CE, UL, GS, CCC

9. User Tips

  • Direct USB-C Charging: The clipper supports direct USB-C charging, offering flexibility if the charging base is not available.
  • Regular Oiling: Even though oil is not included, sourcing and applying clipper oil regularly will significantly extend the life and performance of your blades.
  • Full Charge for First Use: Always fully charge the trimmer before its initial use to help condition the battery for long-term performance.

10. Warranty and Support

All VGR products come with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use.

For warranty claims, technical support, or any inquiries regarding your VGR Professional Hair Trimmer, please contact your retailer or the manufacturer directly.

Manufacturer Information:

Ningbo Woji Electric Appliance Co., Ltd.
CN-CN-No. 656, Kaifa East Road, Zhouxiang Town, Cixi City, Ningbo, Zhejiang, China

Email: Tiger-Zhou@web.de

© 2023 VGR. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.