VGR V-889 S2

Contents

VGR V-889 S2 Professional Hair Clipper and Trimmer Set User Manual

Model: V-889 S2

1. Introduction

Thank you for choosing the VGR V-889 S2 Professional Hair Clipper and Trimmer Set. This versatile grooming kit is designed for efficient and precise hair cutting, featuring a high-speed motor and advanced blade technology. This manual provides essential information for the safe and effective use, maintenance, and care of your device.

VGR V-889 S2 High Speed Hair Clipper with charging base
The VGR V-889 S2 set, featuring a high-speed hair clipper and trimmer with charging bases.

2. Safety & Warnings

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries.

For Electrical or Electronic Products: relating to electrical safety, electromagnetic compatibility, or environmental compliance, conformity marking (e.g., CE) and related documentation may be required.

3. Package Contents

Ensure all items are present upon unboxing:

  • 1 x Hair Clipper
  • 1 x Hair Trimmer
  • 3 x Cutting Guide Combs (for trimmer)
  • 6 x Cutting Guide Combs (for clipper)
  • 1 x USB Charging Cable
  • 1 x Cleaning Brush
  • 1 x Protective Cap
  • 1 x Instruction Manual
VGR V-889T model with accessories and packaging
Example of V-889T model with included accessories and packaging.

4. Product Overview

4.1. High-Speed Motor (9000 RPM)

Both the clipper and trimmer are equipped with a powerful 9000 RPM motor, ensuring efficient, swift, and smooth cutting performance with low noise and a long service life.

Diagram of a high-speed motor
Internal diagram of the high-speed motor, designed for low noise and long service life.

4.2. Advanced Blades

  • Hair Clipper: Features ceramic and Metal Injection Molding (MIM) blades for sharpness, durability, and resistance to wear.
  • Hair Trimmer: Equipped with ceramic and Diamond-Like Carbon (DLC) coated blades, providing a sharp, precise, and smooth trimming experience with reduced friction.
Close-up of ceramic and DLC coating blade
Detail of the ceramic and DLC coating blade, designed for fast and smooth cutting.
Close-up of ceramic and MIM blades
Detail of the ceramic and MIM blades, also designed for fast and smooth cutting.

4.3. LED Display

An integrated LED display provides real-time information on battery level, motor RPM, and charging status, enhancing user convenience and ensuring optimal performance.

LED display showing power left and RPM
The LED display shows the device's running status, remaining power, and motor speed (9000 RPM).

4.4. Metal Body Construction

Both devices feature a robust metal body, offering durability, resistance to impacts and scratches, and a comfortable, secure grip for precise control.

5. Setup

5.1. Before First Use

  1. Remove all protective films from the device.
  2. Ensure the device is fully charged before initial use.

5.2. Charging

Connect the provided USB cable to the charging port on the device or its charging base, and then to a certified 5V power adapter (not included). The LED display will indicate the charging status. A full charge typically takes 2.5 to 3 hours, providing 240 to 250 minutes of working time.

USB charging setup for VGR clipper
Illustration of USB charging for the VGR clipper, showing the charging base and cable connection.
USB-C charging options for VGR clipper
The device supports USB-C charging, compatible with computers, laptops, and power banks.

5.3. Attaching Guide Combs

Select the desired guide comb for your preferred cutting length. Align the comb with the blade and snap it securely into place. The length of the cut is indicated on each guide comb.

VGR guide combs with lengths
Available guide combs for the clipper, ranging from 1.5mm to 13mm.

6. Operating Instructions

6.1. Power On/Off

Press and hold the power button for 3 seconds to turn the device on or off.

6.2. Adjusting Cutting Length

  • With Guide Combs: Attach the desired guide comb as described in Section 5.3.
  • Without Guide Comb (Clipper): The clipper features a 5-level adjustment lever, allowing cutting lengths from 0.8mm to 2mm. Short press the power button to change modes or adjust settings.
Cutting guides diagram for 5-level adjustment
Diagram illustrating the 5-level cutting length adjustment from 0.8mm to 2mm without a guide comb.

6.3. Wet/Dry Use

The VGR V-889 S2 supports both wet and dry haircutting. Ensure proper cleaning after wet use.

6.4. After Use

Turn off the device and store it in a dry place, out of reach of children.

7. Maintenance

7.1. Cleaning

After each use, turn off the device and use the provided cleaning brush to remove any hair clippings from the blades and housing. For thorough cleaning, the blades can be rinsed under running water, ensuring the main body of the device is not submerged.

7.2. Lubrication

Due to airline regulations, lubricants are not included with the product. It is recommended to apply a few drops of clipper oil to the blades regularly to maintain optimal performance and extend blade life. Apply oil while the device is running to distribute it evenly.

8. Troubleshooting

  • Device not turning on: Ensure the device is fully charged. Check the power button for proper function.
  • Reduced cutting performance: Clean the blades thoroughly. Apply clipper oil to the blades. Ensure the blades are not damaged.
  • Unusual noise: Clean and lubricate the blades. If the noise persists, contact customer support.

9. Specifications

Feature Specification
Brand Name VGR
Model V-889 S2 (Variants: V-889 C, V-889 T)
Motor Speed 9000 RPM
Voltage <20V
Power Type Mains and battery operation
Battery Type Lithium Battery (2000 mAh for V-889T, 2500 mAh for V-889C)
Battery Charging Time 2.5 - 3 hours
Battery Life 240 - 250 minutes (over 90 minutes)
Blade Material (Clipper) Ceramic and MIM Blades
Blade Material (Trimmer) Ceramic and DLC Coating Blade
Minimum Cutting Length 0.8 - 1 mm
Maximum Cutting Length 13 mm (with guide combs)
Length Adjustment Method Change of nozzles (guide combs) and 5-level lever adjustment
Number of Nozzles 9 (total guide combs)
Function Wet haircut, Dry haircut, Fast Charging, Charging indication
Material Metal
Certification UL, GS, CE, CCC

10. Warranty & Support

10.1. Warranty Information

All VGR products come with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects under normal use. Damage due to misuse, accident, or unauthorized modification is not covered.

10.2. After-Sale Service

If the item is damaged during shipping or you encounter any issues, please contact customer service immediately. Ensure the item remains in its original condition when reporting damage. We will review your situation and provide a solution accordingly.

For a comprehensive guide, you can refer to the original user manual PDF: View User Manual (PDF)

11. User Tips

  • Professional Performance: Users have noted the high performance of these clippers, suitable for professional barbers due to their speed and precision.
  • Excellent Battery Life: The devices offer good battery life (240-250 minutes working time) and are easy to charge via USB.
  • Charging Bases Included: Both the V-889C and V-889T models come with their respective charging bases, providing convenient storage and charging.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.