VGR V-015, V-994, V-334

Contents

VGR Professional Hair Trimmers and Clippers User Manual

Models: V-015, V-994, V-334

1. Introduction

Thank you for choosing VGR Professional Hair Trimmers and Clippers. This manual provides important information regarding the safe operation, maintenance, and specifications of your device. Please read it thoroughly before first use and keep it for future reference.

VGR Professional Hair Clippers and Trimmers V-105, V-994, V-334

Image: VGR Professional Hair Clippers and Trimmers (Models V-105, V-994, V-334)

2. Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.

3. Package Contents

The contents of your package may vary depending on the specific model purchased. Please refer to the list below for typical inclusions:

V-994 Blade (Replacement)

  • 1 * Blade For (V-994)

V-334 (Beard Trimmer/Shaver)

  • 1 * Beard Trimmer
  • 1 * USB charging cable
  • 1 * Cleaning brush
  • 1 * Protective cap
  • 1 * Storage bag
  • 1 * Charging base

V-994 (Hair Trimmer)

  • 1 * Hair Trimmer
  • 3 * Cutting Guide Comb (1.5-3-6mm)
  • 1 * USB Charging Cable
  • 1 * Cleaning Brush
  • 1 * Protective Cap
  • 1 * Charging Base

V-015 (Hair Clipper)

  • 1 * Hair Clipper
  • 6 * Cutting Guide Comb (1.5-3-4.5-6-10-13mm)
  • 1 * USB Charging Cable
  • 1 * Cleaning Brush
  • 1 * Protective Cap
  • 1 * Charging Base
  • 1 * Black Machine Housing

V-994 with Blade (Bundle)

  • 1 * Hair Trimmer
  • 1 * Blade For (V-994)
  • 3 * Cutting Guide Comb (1.5-3-6mm)
  • 1 * USB Charging Cable
  • 1 * Cleaning Brush
  • 1 * Protective Cap
  • 1 * Charging Base
VGR V-015 Hair Clipper with accessories in a case

Image: V-015 Hair Clipper and accessories in a protective case.

VGR V-994 Hair Trimmer with accessories in a case

Image: V-994 Hair Trimmer and accessories in a protective case.

VGR V-334 Beard Trimmer with accessories

Image: V-334 Beard Trimmer with charging base, USB cable, cleaning brush, and protective cap.

4. Specifications

FeatureV-015 Hair ClipperV-994 Hair TrimmerV-334 Beard Trimmer
Product NameHair ClipperHair TrimmerBeard Trimmer
ModelV-015V-994V-334
Battery Capacity2500 mAh2000 mAhLithium Battery
Rated Input5V ⎓ 1A5V ⎓ 1A5V ⎓ 1A
Guide Combs1.5 / 3 / 4.5 / 6 / 10 / 13 mm1.5 / 3 / 6 mmN/A (Shaver)
Taper Lever0.8 - 2.0 mmN/AN/A
Charging Time3.0 Hours2.5 Hours3.0 Hours
Working Time (Full Charge)120 minutes150 minutes150 minutes
Motor TypeVector motorVector motorVector motor
Range of Speeds9000-11000 RPM / min8000-10000 RPM / min8000-10000 RPM / min
Blade MaterialStainless Steel Blade, DLC BladeStainless Steel Blade, DLC BladeDouble Titanium Coated Foils
VoltageGlobal Universal (100-240V)
Rated Power5W
Product MaterialMetal
VGR V-015 Hair Clipper Specifications

Image: V-015 Hair Clipper Specifications.

VGR V-994 Hair Trimmer Specifications

Image: V-994 Hair Trimmer Specifications.

Package Dimensions

  • Length: 25 cm
  • Width: 15 cm
  • Height: 10 cm
  • Weight: 1.685 kg

5. Setup

  1. Unboxing: Carefully remove all components from the packaging. Inspect for any damage.
  2. Before First Use: Remove all protective films from the device.
  3. Charging: Connect the provided USB cable to the charging base, then connect the charging base to a certified 5V power adapter. Place the trimmer/clipper onto the charging base. The LED indicator light will show the charging status. Ensure the device is fully charged before its first use for optimal battery life.

Video: Overview of VGR Hair Clippers and Trimmers, including unboxing and components.

6. Operation

  1. Power On/Off: Press and hold the power button for 3 seconds to turn on the device. Short press the button to change modes (if applicable).
  2. Attaching Guide Combs (V-015, V-994): Select the desired cutting guide comb (e.g., 1.5mm, 3mm, 6mm, 10mm, 13mm) and securely attach it to the blade. Ensure it clicks into place.
  3. Adjusting Taper Lever (V-015): Use the taper lever on the side of the clipper to adjust the cutting length between 0.8mm and 2.0mm for precise fading and blending.
  4. Cutting: Start with a longer guide comb if you are unsure of the desired length. Move the clipper/trimmer against the direction of hair growth for an even cut.
  5. Indicator Light: The LED indicator light shows the current status and remaining battery life of your device.
VGR Hair Clipper with guide combs and taper lever adjustment

Image: Guide combs and taper lever adjustment mechanism on a VGR hair clipper.

Man getting a haircut with VGR hair clipper

Image: Illustrative use of a VGR hair clipper for head hair.

Man shaving beard with VGR V-334 beard trimmer

Image: Illustrative use of the VGR V-334 beard trimmer.

7. Maintenance

  1. After Use: Turn off the device and store it in a dry place.
  2. Cleaning: Use the provided cleaning brush to remove hair clippings from the blades and body of the device after each use. For shavers (V-334), ensure foils are clean.
  3. Lubrication: Regularly oil the blades to maintain optimal cutting performance and prevent overheating. (Note: Due to airline regulations, lubricants are not included in the product package.)
  4. Blade Replacement (V-994): If the V-994 blade becomes dull or damaged, it can be replaced. Refer to the specific instructions for blade replacement for your model.
VGR V-994 replaceable blade

Image: V-994 replaceable blade with screws.

VGR V-994 blades

Image: Multiple V-994 replacement blades in packaging.

8. Troubleshooting

  • Device not turning on: Ensure the device is fully charged. Check the charging cable and adapter for damage.
  • Poor cutting performance / Snagging: Clean the blades thoroughly to remove any hair buildup. Apply a few drops of clipper oil to the blades. Ensure the blades are not dull or damaged; replace if necessary.
  • Blades getting too hot: This can be caused by lack of lubrication or excessive hair buildup. Clean and oil the blades. If the issue persists, allow the device to cool down before continuing use.
  • Unusual noise: Turn off the device immediately. Check for any obstructions in the blade area. If the noise persists after cleaning, contact customer support.

9. User Tips

  • Many users find these clippers very powerful and effective for trimming beards without snagging.
  • Regular cleaning and oiling of the blades are crucial for maintaining optimal performance and preventing the blades from getting too hot.
  • The VGR clippers are often praised for their excellent quality and robust build.

10. Manufacturer & Compliance Information

Manufacturer Information

Manufacturer: Ningbo Woji Electric Appliance Co., Ltd.
Address: CN-CN-CN-No. 656, Kaifa East Road, Zhouxiang Town, Cixi City, Ningbo, Zhejiang, 49-21312066043

EU Authorized Representative

Representative: Jorge Wilson
Address: CASTELLANA 9144, 28046 Madrid
Contact: compliance.gavimosa@outlook.com, 34-688185858

Compliance Information

For Electrical or Electronic Products: relating to electrical safety, electromagnetic compatibility, or environmental compliance, conformity marking (e.g., CE) and related documentation may be required.

Certifications: UL, GS, CE, CCC

A user manual (PDF) is available for download at: VGR User Manual (PDF)

11. Warranty & Support

All VGR products come with a 12-month warranty from the date of purchase.

If you encounter any issues or have questions regarding your product, please contact the seller or manufacturer directly for support. Ensure the item remains in its original condition if reporting damage during shipping.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.