1. Introduction
The Tuya Wifi Smart Automatic Water Timer with Gateway provides smart control over your garden irrigation system. The Sub-GHz Gateway enables smartphone access to the RF Water Timers from anywhere with internet access using the Tuya Smart APP or Smart Life APP. This system supports remote sprinkler programming and is compatible with smart assistants like Amazon Alexa and Google Assistant.
2. Product Components
3. Setup Guide
3.1. Download the App
Search for "Tuya Smart" or "Smart Life" in your device's App Store (iOS) or Google Play Store (Android), or scan one of the QR codes below. Either app is compatible.
Tuya Smart
Smart Life
After downloading, register an account in the app.
3.2. Sub-GHz Gateway Overview
- RF Indicator:
- Blue LED flashing: Add RF devices.
- Blue LED on: In working mode.
- WIFI Indicator:
- Orange LED flashing: In pairing mode.
- Orange LED on: Offline, lost internet connection.
- Orange LED off: Connected to internet.
- Gateway Button:
- Hold 5 seconds: Reset the gateway.
- Press 1 second: Add RF devices.
- Plug
3.3. RF Water Timer Overview
- Water Inlet: 3/4" Internal Thread, with built-in filter.
- Light
- Button: Reset Button / Manual Button.
- Water Outlet: 3/4" External Thread.
- Battery Compartment
3.4. Connect the Gateway to the App
- Plug the Sub-GHz Gateway into a power source near your 2.4 GHz WiFi router. Closer proximity is better for connection stability.
- The RF indicator light will turn blue, and the WiFi indicator light will flash orange slowly, indicating the gateway is in pairing mode.
- Turn on your phone's Bluetooth and open the Tuya Smart / Smart Life app.
- Follow the in-app prompts to complete the Sub-GHz Gateway setup process.
- After successful connection, the Sub-GHz Gateway will appear on the Home screen and automatically navigate to its dedicated screen.
- The RF indicator light will then flash slowly, indicating it's ready to pair with RF devices.
- Turn off your phone's Bluetooth after setup.
Video: Step-by-step guide on connecting the WiFi Water Timer and Gateway to the Smart Life App and setting up watering schedules.
3.5. Add the RF Water Timer to the Gateway
- Install two 1.5V AA alkaline batteries into the RF Water Timer.
- The timer's light will turn white and flash quickly, indicating it's waiting for network connection.
- In the Tuya Smart / Smart Life app, tap "Sub-GHz Gateway" on the Home screen.
- On the Sub-GHz Gateway screen, the RF Water Timer should be automatically added within a few seconds. Alternatively, follow the in-app prompts for the RF Water Timer pairing process.
- After successful connection, the RF Water Timer will be displayed on both the Home screen device list and the Sub-GHz Gateway screen.
4. Operating Instructions in App
Tap "RF Water Timer" on the Home screen device list or Sub-GHz Gateway screen to enter the RF Water Timer screen.
- Tap the top right icon for additional information.
- RF signal strength indicator.
- Battery power indicator.
- Weather Delay function.
- Image Display Area.
- Next Schedule information.
- Manual watering button.
- Manual watering duration display.
- Record button.
- Schedule button.
- Spray button.
4.1. Weather Delay
This feature allows the timer to automatically adjust watering based on local weather conditions.
- Tap "Weather Delay" on the main screen to access settings.
- Set a delay duration from 1 to 7 days, or enable/disable Smart Weather.
- Tap "<" on the top left corner to go back.
4.2. Manual Watering
To manually control watering:
- Tap the central manual watering button.
- Use the wheels to set the desired hour, minute, and second for watering.
- Tap "Save" to confirm your setting.
- Go back by tapping "<" on the top left corner.
- Tap the central button again to start manual watering.
Manual watering can be stopped or started at any time using the central button.
4.3. Schedule
To set up an automatic watering schedule:
- Tap "Schedule" on the main screen, then tap "Add".
- Set the start time, run time, and choose between a loop (specific days) or single time.
- Tap "Save" on the top right corner.
- Tap "<" to go back to the "Add" page. The on-off button for the new plan will be green, indicating it's active.
Up to 5 watering plans can be added.
4.4. Spray
To configure spray settings:
- Tap "Spray" on the main screen.
- Set the start time, end time, spray duration, interval duration, and loop (specific days) or single time.
- Tap the "Enable" button to turn it green.
- Tap "<" on the top left corner to go back.
4.5. Record
Tap "Record" to view the watering records for the past 7 days.
5. Maintenance and Precautions
- App Refresh: Due to communication delays, manually scroll down to refresh the app every time you open it for data updates.
- App Updates: App display interfaces may differ from this manual due to updates. Always follow the instructions in the current app version. Upgrade the app as prompted and regularly clear the cache for optimal performance.
- Filter Maintenance: The RF Water Timer's water inlet must be equipped with a filter to prevent impurities from blocking the valve, which can lead to valve switch failure or water leakage. Clean or replace the filter regularly.
- Water Pressure: The timer itself does not generate pressure. It requires tap water pressure or a pressurized water source to function correctly.
- Temperature & Storage: The working temperature range for the timer is 3°C to 45°C. If the temperature drops to freezing or if the timer will not be used for an extended period, remove it, take out the batteries, drain any water from the valve tube, and store it in a dry indoor location.
6. Troubleshooting
- Connection Timeout/Failed: If the app prompts for connection timeout or failure, hold the gateway button for 5 seconds until the WiFi light blinks slowly again. Double-check your WiFi router password, as an incorrect password will cause connection failure.
- Weak RF Signal: If the RF signal is weak, try moving the RF Water Timer closer to the Sub-GHz Gateway.
- Low Battery: If the battery power is low, replace the existing batteries with new AA alkaline batteries.
- App Data Not Updating: Manually scroll down to refresh the app screen to ensure you have the latest data.
- App Interface Differences: App interfaces may change with updates. Refer to the in-app instructions for the most current guidance.
- Device Malfunction: Ensure the app is updated and its cache is regularly cleaned. Check the water inlet filter for blockages.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | HCT-633-HCG-003 |
| Material | Plastic |
| Type | Garden Water Timers (Ac Pro) |
| Water Timer Power Supply | 2 × 1.5V 'AA' alkaline batteries |
| Gateway Power Supply | 110-240V AC |
| Working Temperature | 3°C - 45°C |
| Working Pressure | 0.05 - 0.8 MPa |
| Wireless Connectivity | WiFi (2.4 GHz only), RF433 |
| RF Range | Up to 500m (without obstacles) / 160ft (approx. 48m) |
| Water Inlet Thread | 3/4" Internal Thread |
| Water Outlet Thread | 3/4" External Thread |
| Package Dimensions (L x W x H) | 21 cm x 16 cm x 7 cm |
| Package Weight | 0.462 kg |
8. User Tips
- For optimal performance, ensure your gateway is centrally located within your garden to maximize the RF range to the water timer.
- Regularly check the battery level of your water timer through the app to avoid unexpected interruptions in watering schedules.
- Utilize the 'Weather Delay' function to conserve water and prevent overwatering during rainy periods.
- If you experience connectivity issues, try restarting both the gateway and your home router.
9. Warranty and Support
In case of device performance failures, a 1-year warranty is included (excluding accessories). The warranty does not cover damages caused by unauthorized maintenance, misuse, collision, negligence, abuse, accident, modification, incorrect use of the device or its parts, or force majeure.
For quality problems, you may contact local distributors or special repair stations with your device invoice and warranty card.
A detailed user manual in PDF format is available for download. You can access it via this link: User Manual (PDF).
10. Declaration on Hazardous Substances in Electronic Products
This form is compiled in accordance with the requirements of SJ / T11364.
| Parts | Pb | Hg | Cd | Cr(VI) | PBB | PBDE |
|---|---|---|---|---|---|---|
| Plastic | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
| PCBA | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
| Accessories | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
☐ Indicates that the concentration of the hazardous substance contained in all the homogeneous materials of this part is below the limit requirement of the GB/T26572 standard.
☑ Indicates that the concentration of the hazardous substance contained in all the homogeneous materials of this part is above the requirement of the GB/T26572 standard.
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
11. Manufacturer Information
Manufacturer: Ningbo Hanci Electrical Co., LTD.
Address: No.127-129, Dexing Road, Ninghai County, Ningbo City, China. 315600
Made in China