1. Introduction
The Tuya WIFI Smart Garden Watering Timer system allows you to control your garden irrigation remotely via a smartphone application. The system consists of an RF Water Timer and a Sub-GHz Gateway, enabling convenient and efficient watering management from anywhere with internet access.
Figure 1: System Components - Water Timer, Smartphone App, and Sub-GHz Gateway.
Video 1: Demonstration of App Connection and Watering Functions.
2. Product Overview
2.1 Sub-GHz Gateway
The Gateway acts as a bridge between your RF Water Timer and your home WiFi network, enabling remote control via the app.
- RF Indicator: Blue LED flashes for adding RF devices, solid blue for working mode.
- WIFI Indicator: Orange LED flashes for pairing mode, solid orange for offline/lost connection, off for connected.
- Gateway Button: Hold for 5 seconds to reset, press for 1 second to add RF devices.
- Plug: For power connection (110-240V AC).
Figure 2: Sub-GHz Gateway and RF Water Timer with dimensions and feature callouts.
2.2 RF Water Timer
The Water Timer connects directly to your water faucet and controls the water flow based on your programmed settings.
- Water Inlet: 3/4" Internal Thread with a built-in filter.
- Light: Indicator light for status.
- Button: Functions as a Reset Button and Manual Button.
- Water Outlet: 3/4" External Thread.
- Battery Compartment: Requires 2x 1.5V AA alkaline batteries.
3. Setup Guide
3.1 Download the Application
The system operates with either the Tuya Smart APP or Smart Life APP. Both are compatible.
- Search for "Tuya Smart" or "Smart Life" in your device's App Store (iOS) or Google Play Store (Android).
- Alternatively, scan the QR code provided in the original manual (page 2) to directly download the app.
- Register an account within the chosen application.
3.2 Add the Sub-GHz Gateway to the App
- Plug the Sub-GHz Gateway into a power source close to your 2.4 GHz WiFi router. Proximity to the router improves connection stability.
- Upon powering on, the RF indicator light will turn blue, and the WiFi indicator light will flash orange slowly. This indicates the Gateway is in pairing mode.
- Enable Bluetooth on your smartphone and open the Tuya Smart / Smart Life app.
- Follow the in-app prompts to complete the Gateway setup process. If connection issues occur, hold the Gateway button for 5 seconds until the WiFi light blinks slowly, then re-attempt. Ensure your WiFi password is correct.
- Once successfully connected, the Gateway will appear on the app's Home screen and automatically navigate to the Sub-GHz Gateway screen.
- The RF indicator light on the Gateway will then flash blue slowly, signifying it is ready to pair with RF devices.
- Turn off your phone's Bluetooth after the Gateway is added.
3.3 Add the RF Water Timer to the Gateway
- Insert two 1.5V AA alkaline batteries into the RF Water Timer's battery compartment.
- The Water Timer's light will turn white and flash quickly, indicating it is waiting for a network connection.
- In the Tuya Smart / Smart Life app, tap on the "Sub-GHz Gateway" icon on the Home screen to enter its dedicated screen.
- The RF Water Timer should be automatically added within a few seconds. If not, follow the in-app prompts for manual pairing. Ensure the Gateway's RF indicator is flashing blue slowly (press Gateway button for 1 second if not) and the Water Timer's light is flashing white quickly (hold Water Timer button for 5 seconds if not).
- After successful connection, the RF Water Timer will be listed on both the Home screen device list and the Sub-GHz Gateway screen.
4. Operating Instructions in App
To access the RF Water Timer controls, tap "RF Water Timer" on the Home screen device list or the Sub-GHz Gateway screen.
Figure 3: Remote control of the water timer via the mobile app.
4.1 App Interface Overview
The RF Water Timer screen provides the following controls and information:
- Information Icon: Tap for additional details about the RF Water Timer.
- RF Signal: Displays signal strength. If weak, consider moving the Gateway closer to the Water Timer.
- Battery Power: Indicates battery level. Replace batteries if low.
- Weather Delay: Access settings for delaying watering based on weather conditions.
- Image Display Area: Shows relevant images or status.
- Next Schedule: Displays information about the upcoming watering schedule.
- Manual Watering Button: Initiates or stops manual watering.
- Manual Watering Duration: Shows the current manual watering duration.
- Navigation Bar: Contains options for Record, Schedule, and Spray.
- Spray Function: Configures spray watering patterns.
- Record: Views past watering records.
4.2 Weather Delay
This feature helps prevent overwatering by delaying schedules based on weather.
- Tap "Weather Delay" on the main RF Water Timer screen.
- Select a delay duration (1-7 days), cancel the delay, or enable "Smart Weather" for automatic delays.
- Tap "<" to return to the previous screen.
Figure 4: Rain delay mode in the app to prevent overwatering.
4.3 Manual Watering
To manually control watering:
- Tap the central "Manual watering" button on the main RF Water Timer screen.
- Use the wheels to set the desired hour, minute, and second for watering.
- Tap "Save" to confirm your setting.
- Tap "<" to go back.
- Tap the central button again to start the manual watering. Manual watering can be stopped or started at any time using this button.
4.4 Schedule
Program automatic watering schedules:
- Tap "Schedule" in the navigation bar and then tap "Add".
- Set the start time, run time, and choose between a loop (recurring days) or single time watering.
- Tap "Save" in the top right corner.
- Tap "<" to return to the "Add" page. The on-off button for the new schedule will be green, indicating it's active.
Up to 5 watering plans can be added.
Figure 5: Two watering modes available: Conventional irrigation and Spray pattern.
4.5 Spray
Configure specific spray patterns:
- Tap "Spray" in the navigation bar.
- Set the start time, end time, spray duration, interval duration, and choose between a loop or single time.
- Tap the "Enable" button to activate the spray schedule.
- Tap "<" to go back.
4.6 Record
To view past watering activities:
- Tap "Record" in the navigation bar. You can view watering records for the past 7 days.
5. Maintenance
- App Updates: Due to app version updates, display interfaces may differ. Always follow the instructions in the current app version. Regularly upgrade the app and clear its cache for optimal performance.
- Water Inlet Filter: The water inlet must be equipped with a filter to prevent impurities from blocking the valve, which can lead to valve failure or water leakage. Clean or replace the filter regularly.
- Water Pressure: The timer itself does not generate pressure. It requires tap water pressure or a pressurized water source to function correctly.
- Working Temperature: The optimal working temperature range is 3°C to 45°C.
- Winterization/Storage: If temperatures drop to freezing or the timer will not be used for an extended period, remove it from the faucet, take out the batteries, empty any water from the valve tube, and store it in a dry indoor location.
6. Troubleshooting
- Gateway Connection Timeout/Failure: If the app prompts for a connection timeout or failure during Gateway setup, hold the Gateway button for 5 seconds until the WiFi light blinks slowly, then retry. Verify your WiFi password.
- Weak RF Signal: If the app indicates a weak RF signal for the Water Timer, try moving the Sub-GHz Gateway closer to the Water Timer to improve communication.
- Water Timer Not Pairing: Ensure 2x AA alkaline batteries are correctly installed. If the Water Timer's light is not flashing white quickly, hold its button for 5 seconds to enter pairing mode.
- No Water Flow: Check the water inlet filter for blockages and clean or replace it if necessary. Ensure adequate water pressure from your faucet.
- App Display Issues: If the app interface differs from this manual, refer to the latest in-app instructions. Clear the app cache or update the app if issues persist.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | HCT-633-HCG-003 |
| Material | Plastic |
| Timer Type | Ac Pro (Garden Water Timers) |
| Water Inlet | 3/4" Internal Thread with filter |
| Water Outlet | 3/4" External Thread |
| Power Supply (Water Timer) | 2x 1.5V AA alkaline batteries |
| Power Supply (Gateway) | 110-240V AC |
| Working Temperature (Water Timer) | 3°C - 45°C |
| Working Pressure | 0.05 - 0.8 Mpa |
| RF Range | Up to 500m (without obstacles) |
| Wireless Connectivity | WiFi (2.4 GHz only), RF 433MHz |
| App Compatibility | Tuya Smart / Smart Life, Alexa, Google Home |
Figure 6: Illustration of the system's long-distance stable connection (up to 1640 FT).
8. User Tips
- Optimal Gateway Placement: Place the Sub-GHz Gateway in a central location within your home, ensuring it's close to your WiFi router and has a clear line of sight to the outdoor RF Water Timer for best signal strength.
- Battery Life: Use high-quality alkaline batteries for the RF Water Timer to ensure consistent performance and longer battery life. Check battery status regularly via the app.
- Smart Weather Integration: Utilize the "Smart Weather" feature in the app to automatically adjust watering schedules based on local weather forecasts, preventing overwatering during rain.
- Regular Filter Checks: Periodically inspect and clean the water inlet filter on the RF Water Timer to prevent debris buildup and ensure uninterrupted water flow.
- Test Schedules: After setting up new schedules, perform a manual test run to confirm that the watering duration and frequency are as expected.
9. Warranty and Support
9.1 After-Sales Service
- A 1-year warranty is included for device performance failures, excluding accessories.
- The warranty does not cover damages resulting from unauthorized maintenance, misuse, collision, negligence, abuse, accident, modification, incorrect use of the device or its parts, or force majeure.
- For quality problems, please contact local distributors or special repair stations with your device invoice and warranty card.
For further assistance, you may refer to the official user manual PDF: View User Manual (PDF)
9.2 Manufacturer Information
Manufacturer: Ningbo Hanci Electrical Co., LTD.
Address: No.127-129, Dexing Road, Ninghai County, Ningbo City, China. 315600
Country of Origin: Made in China
10. Declaration on Hazardous Substances in Electronic Products
This declaration is compiled in accordance with the requirements of SJ / T11364.
| Parts | Pb | Hg | Cd | Cr(VI) | PBB | PBDE |
|---|---|---|---|---|---|---|
| Plastic | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
| PCBA | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
| Accessories | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
☐ Indicates that the concentration of the hazardous substance contained in all the homogeneous materials of this part is below the limit requirement of the GB/T26572 standard.
☑ Indicates that the concentration of the hazardous substance contained in all the homogeneous materials of this part is above the requirement of the GB/T26572 standard.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.