QCY Crossky C30S

Contents

QCY Crossky C30S Clip-On Wireless Earphones User Manual

Model: Crossky C30S

Introduction

Thank you for choosing the QCY Crossky C30S Clip-On Wireless Earphones. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your new earphones. For a more convenient control experience, please download and install the QCY mobile APP client.

QCY Crossky C30S Earphones and Charging Case
QCY Crossky C30S Earphones and Charging Case

Package Contents

The package includes the following items:

  • User Manual
  • Charging case
  • Charging Cable (Type-C)

Product Overview

Familiarize yourself with the components of your QCY Crossky C30S earphones and charging case.

Earbud Components

Diagram of QCY Crossky C30S earbud components
Diagram of the QCY Crossky C30S earbud components, including the LED indicator, touch panel, sound hole, and charging contacts.
  • LED Indicator: Shows status (pairing, charging, etc.).
  • Touch Panel: For controlling playback, calls, and voice assistant.
  • Sound Hole: Where audio is emitted.
  • Charging Contacts: For charging the earbuds in the case.

Charging Case Components

Diagram of QCY Crossky C30S charging case components
Diagram of the QCY Crossky C30S charging case components, including the LED indicator and Type-C charging port.
  • LED Indicator: Shows charging status of the case.
  • Type-C Charging Port: For charging the case.

Setup: First-Time Pairing

Follow these steps for initial pairing with your device:

  1. Take out both earbuds from the charging case. Remove the isolation films from the earbuds, then place both earbuds back into the charging case. This step activates new earbuds.
  2. Take out both earbuds again.
  3. On your phone, refresh the Bluetooth device list and tap on "QCY Crossky C30S" to complete the pairing.
Visual guide for initial earbud pairing
Visual guide for initial earbud pairing, showing removal of isolation film and placing back in case.

Operating Instructions

Basic Functions

  • Power On: Open the charging case lid and take out the earbuds. Alternatively, long press either earbud's touch panel for 1.5 seconds (if earbuds are outside the charging case).
  • Power Off: Place the earbuds back into the charging case.
  • Answer/End Call: Double tap either earbud's touch panel.
  • Ignore Call: Long press either earbud's touch panel for 1.5 seconds.
  • Play/Pause: Double tap either earbud's touch panel.
  • Next Track: Triple tap the right earbud's touch panel.
  • Voice Assistant: Triple tap the left earbud's touch panel.

Note: Other functions like previous track, game mode, and spatial audio can be customized within the QCY APP. LDAC is disabled by default; enable it via the QCY APP if desired.

Multi-Point Connection

Your QCY Crossky C30S earphones support connecting to two devices simultaneously.

  1. Power on the earbuds. They will automatically enter pairing mode. Connect them to Device A. Then, turn off Bluetooth on Device A. The earbuds will re-enter pairing mode.
  2. On Device B, search for "QCY Crossky C30S" and tap to connect.
  3. On Device A, turn on Bluetooth and click on the already paired earbud name "QCY Crossky C30S". Pairing will be successful, and the earbuds will now be connected to both Device A and Device B simultaneously.
Diagram illustrating multi-point connection setup
Diagram illustrating multi-point connection setup for QCY Crossky C30S with two devices.

Wearing Instructions

To ensure optimal sound quality and comfort, follow these steps for wearing your earbuds:

  1. Insert the earbud from the ear wall, moving it down to the middle-lower position. Fine-tune the position until it feels comfortable.
  2. Adjust the earbud angle, aligning the sound hole vertically with your ear canal for the best wearing experience.
  3. Incorrect wearing may lead to varying degrees of impact on call quality and listening experience.
Visual instructions for correctly wearing the QCY Crossky C30S earbuds
Visual instructions for correctly wearing the QCY Crossky C30S earbuds.
Comfort Fit, IPX5 Waterproof, Z Shape Stable Wear
The QCY Crossky C30S features a Z-shape stable wear design for comfort and is IPX5 waterproof, making it suitable for sports.

Factory Reset

If you experience connection issues, you can perform a factory reset to clear pairing records:

  1. Ensure the earbuds are not connected to any device.
  2. Take both earbuds out of the charging case.
  3. Within 30 seconds, tap either earbud's touch panel 5 times.
  4. The earbud's white LED indicator will flash 5 times, then stop flashing, indicating the reset is complete.

After a factory reset, use the first-time pairing method to connect the earbuds for normal use.

Maintenance: Charging

Charging the Earbuds

  • Place the earbuds into the charging case.
  • During charging, the earbud's red LED indicator will stay on.
  • Once fully charged, the red LED indicator will turn off.

Charging the Charging Case

  • Connect the charging case to a power source using the provided Type-C charging cable.
  • During charging, the case's white LED indicator will flash.
  • Once fully charged, the white LED indicator will stay on.
Infographic detailing the battery life of QCY Crossky C30S earphones and charging case
The QCY Crossky C30S offers up to 6 hours of single playtime and 40 hours with the charging case. A 10-minute charge provides 1 hour of listening.

Troubleshooting (FAQ)

Q: Only one earbud has sound, how to solve it?
A: Put both earbuds back into the charging case, close the lid, then take them out again to check if both earbuds have sound. If only one earbud still has sound, please factory reset both earbuds.
Q: The phone prompts "cannot connect", how to solve it?
A: Delete the pairing record on the phone, then search and pair again.
Q: No sound during music/calls, how to solve it?
A: On Android phones, there is a settings icon to the right of the Bluetooth connection name. Click to enter, turn off phone audio and media audio, then turn them on again. If there is still no sound, please re-pair the earbuds with the phone.
Q: Why is there a delay in video/games?
A: Due to factors such as usage environment, network, and phone codecs, there may be varying degrees of delay when the phone transmits audio data to the earbuds.
Q: How to solve sound stuttering/interruption?
A: If there is a lot of interference from Wi-Fi, 5G/4G signals, high-power electrical appliances, etc. in the surrounding environment during use, it may cause stuttering or interruption. Changing the environment or re-pairing can solve the problem.

Specifications

Attribute Value
Brand NameQCY
ModelCrossky C30S
MaterialPC, ABS
Weight (single earbud)5g
Battery Capacity (Charging Case)460 mAh
Battery life up to40 hours (with charging case)
Maximum wireless range10m-20m
NFC TechnologyNo
CategoryEarphones & Headphones
Charging MethodCharging case
Driver Diameter10.8mm
Bluetooth VersionOther (Bluetooth 6.0 mentioned in title)
FeaturesWaterproof, Dual Connection, Playback Control
Codecssbc, LDAC
With MicrophoneYes
Is wirelessYes
Support APPYes
Waterproof RatingIPX5
Functionfor Video Game, Common Headphone, For Mobile Phone, Sport, For Office, For Study
Active Noise-CancellationNo
Volume ControlYes
Control ButtonNo (Touch Panel)
Vocalism PrincipleDynamic
Wireless TypeBluetooth
ConnectorsType-C
CommunicationWireless
StyleOWS ear clip headphones
CertificationFCC, BQB, CB, CE, RoHS
OriginMainland China
Wireless Frequency2.402~2.480GHz
RF Power of Transmission<4dBm

Audio Technology

Cross-section diagram of the 10.8mm dual-magnet driver
The QCY Crossky C30S features a 10.8mm Dual-magnet Driver for rich and detailed sound.
Diagram showing the Bass Enhance Algorithm and Bluetooth V6.0 chip
The earphones incorporate a Bass Enhance Algorithm and Bluetooth V6.0 technology.
Image showing the advanced directional audio technology
Advanced Directional Audio ensures sound is transmitted precisely into your ear canal, preventing up to 99.5% sound leakage.

Hazardous Substances Table

The following table indicates the names and content of hazardous substances in the product, compiled according to SJ/T 11364 regulations:

Component Name Pb (Lead) Hg (Mercury) Cd (Cadmium) Cr(VI) (Hexavalent Chromium) PBB (Polybrominated Biphenyls) PBDE (Polybrominated Diphenyl Ethers)
ShellOOOOOO
Circuit Board AssemblyXOOOOO
BatteryOOOOOO
Charging CableOOOOOO
AccessoriesOOOOOO

O: Indicates that the content of this hazardous substance in all homogeneous materials of this component is below the limit requirements of GB/T 26572.
X: Indicates that the content of this hazardous substance in at least one homogeneous material of this component exceeds the limit requirements of GB/T 26572.

Environmental Protection Service Life: Under normal use conditions, the environmental protection service life of this product is 10 years. During this period, the product will not leak any hazardous substances and can be recycled according to local regulations.

Safety Precautions

  • Please read this user manual carefully before using the product and keep it properly for future reference.
  • Fully charge the product before first use.
  • If the product is not used for an extended period (more than 2 weeks), please recharge it.
  • You must choose a charger produced by a legitimate manufacturer and certified by national safety authorities (e.g., CCC).
  • If your phone cannot detect the Bluetooth earbuds, re-enter pairing mode or perform a factory reset on the Bluetooth earbuds. If there is a phone program error, close and reopen Bluetooth on the phone or restart the phone.
  • Do not disassemble or modify the battery, insert foreign objects, expose it to high temperatures, or immerse it in water or other liquids to prevent battery leakage, overheating, fire, or explosion. Battery replacement should only be done by the manufacturer.
  • Do not drop, crush, or puncture the battery. Prevent external pressure that may lead to internal short circuits and overheating.
  • Do not disassemble or modify the earbuds for any reason, as it may result in fire, electronic breakdown, or permanent damage to the product.
  • Do not expose the product to extremely low or high temperatures (below 0°C or above 45°C).
  • Avoid using the product's indicator light near the eyes of children or animals.
  • Do not use this product during thunderstorms, as it may cause abnormal operation and increase the risk of electric shock.
  • Do not wipe this product with oil or other volatile liquids.
  • Prolonged use of headphones at high volume may cause hearing damage. Please arrange usage time reasonably.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Warranty and Support

Your QCY product purchase is covered by a one-year limited manufacturer warranty from the date of delivery. Please ensure you retain your purchase receipt. If any defects occur due to quality issues within the warranty period, kindly bring both the warranty card and the purchase receipt to the authorized dealer for complimentary replacement services.

Warranty Coverage

  • Within 7 days of purchase: If the product malfunctions due to a quality issue, you are eligible for repair, replacement, or return services.
  • Within 15 days of purchase: If the product malfunctions due to a quality issue, you are eligible for repair or replacement services.
  • Within 12 months of purchase: If the product malfunctions due to a quality issue, you are eligible for repair services.

The manufacturer's warranty is void under the following circumstances (but not limited to):

  • Improper or inadequate maintenance or modification.
  • Accident, misuse, abuse, contamination, or other external causes.
  • The use of unspecified adapter and accessories.
  • Malfunctions or damages resulting from natural disasters, earthquakes, lightning, abnormal voltage, or environmental factors.
  • Damages that occur as a result of one's failure to follow the instructions in this manual.

For detailed warranty terms and conditions, please refer to the official QCY website or the user manual PDF: QCY Crossky C30S User Manual (PDF).

Contact Information

Manufacturer: Dongguan Hele Electronics Co., Ltd.

Address: No. 325 Yuehui Rd. Daojiao Town Dongguan City Guangdong Province China

Website: www.qcy.com

Customer Service Phone: 4008-306-708

User Tips

  • Regular Cleaning: Gently wipe the earbuds and charging case with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials.
  • Optimal Fit: Experiment with the earbud's angle and position to find the most comfortable and secure fit for your ear, which can significantly improve sound quality and prevent sound leakage.
  • App Customization: Download the QCY app to unlock additional features and customize settings like EQ, game mode, and spatial audio to enhance your listening experience.
  • Firmware Updates: Check the QCY app periodically for firmware updates, which can improve performance, stability, and add new features.
  • Storage: Always store the earbuds in their charging case when not in use to protect them from damage and keep them charged.

© 2024 QCY. All rights reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.