1. Introduction
This manual provides comprehensive instructions for the installation and initial setup of the Ownice 9-inch Car Android Radio Frame, including the 2DIN fascia, 16PIN audio harness, and Canbus system. This kit is designed to facilitate the integration of an aftermarket Android head unit into Ford S-MAX S MAX 1 vehicles manufactured between 2006 and 2015, ensuring an OEM-like fit and seamless functionality.
The kit is suitable for users who already own an aftermarket Android head unit and wish to install it in a compatible Ford S-MAX, or for those upgrading their original car stereo to a larger screen Android unit. It also serves as a replacement for existing frames, cables, or Canbus components.
2. Safety Information
Always prioritize safety during installation. Disconnect the vehicle's battery before beginning any electrical work. If you are unsure about any step, consult a professional installer. Ensure all connections are secure to prevent electrical shorts or malfunctions.
3. Package Contents
Verify that all components are present in your package:
- 9-inch Car Android Radio Frame (Fascia)
- 16PIN Audio Harness Wire
- Canbus Box (RPS-FD-001)
- Antenna Adapter
- (Optional) Aftermarket Android Head Unit (not included in this kit)
4. Setup and Installation
This section guides you through the physical installation of the frame and the electrical connections, including the Canbus setup.
4.1. Physical Installation of the Frame
The fascia is designed for a 1:1 fit with the original car radio installation part. It accommodates a 9-inch Android head unit.
- Carefully remove the original car stereo and surrounding trim from your Ford S-MAX S MAX 1 (2006-2015). Refer to your vehicle's service manual for specific trim removal instructions.
- Insert your 9-inch aftermarket Android head unit into the new Ownice fascia frame.
- Align the assembled head unit and fascia with the dashboard opening.
- Secure the frame and head unit in place using the original mounting points and fasteners.
4.2. Wiring Connections (16PIN Audio Harness)
The provided 16PIN audio harness is designed for plug-and-play installation with most aftermarket Android head units. It ensures standard pin definition for car audio and navigation systems.
- Connect the 16PIN connector from the harness to the corresponding port on your Android head unit.
- Connect the other end of the harness to the vehicle's original wiring. The design allows for direct connection without cutting wires.
- Connect the antenna adapter to the head unit and the vehicle's antenna cable.
16PIN ISO Wiring Harness Pinout:
| Pin No. | Wire Color | Function |
|---|---|---|
| 1 | B+ (Yellow) | Battery Positive |
| 2 | GND (Black) | Ground |
| 3 | ILL | Illumination |
| 4 | KEY2 | Steering Wheel Control 2 |
| 5 | ACC (Red) | Accessory Power |
| 6 | ANT | Antenna Power |
| 7 | REVERSE | Reverse Signal |
| 8 | KEY1 | Steering Wheel Control 1 |
| 9 | RL+ (Green) | Rear Left Speaker Positive |
| 10 | RL- (Green/Black) | Rear Left Speaker Negative |
| 11 | FR+ (Grey) | Front Right Speaker Positive |
| 12 | FR- (Grey/Black) | Front Right Speaker Negative |
| 13 | FL+ (White) | Front Left Speaker Positive |
| 14 | FL- (White/Black) | Front Left Speaker Negative |
| 15 | RR+ (Purple) | Rear Right Speaker Positive |
| 16 | RR- (Purple/Black) | Rear Right Speaker Negative |
4.3. Canbus Configuration
The Canbus box (RPS-FD-001) enables communication between your Android head unit and the vehicle's systems (e.g., steering wheel controls, climate control data). Proper configuration is essential for full functionality.
- Plug the 8-pin CAN plug from the harness into the designated socket on your Android head unit. (Refer to Figure 4 for visual guidance).
- On your Android head unit, navigate to the settings menu.
- Find "Factory Settings" (or similar). You may need to enter a password (common passwords are 1260 or 123456, or check with your head unit seller).
- Within Factory Settings, locate "Select Models" or "Canbus Settings".
- Select the correct Canbus Brand and the specific Car Model Year Version for your Ford S-MAX S MAX 1 (2006-2015).
- Save the settings and reboot the head unit.
Note: Canbus functionality will only work correctly after these settings are applied. If you purchased an Ownice Head Unit, these settings may be pre-configured before shipment.
5. Operating Instructions
The Ownice radio frame and harness kit are passive components that integrate your aftermarket Android head unit into your vehicle. Once installed and configured, the operation of your car's multimedia system will be governed by the features and interface of your specific Android head unit. Refer to the user manual provided with your Android head unit for detailed operating instructions.
6. Maintenance
The radio frame and wiring harness require minimal maintenance. Keep the fascia clean by wiping it with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish. Ensure all connections remain secure over time. If any component becomes loose, re-secure it promptly.
7. Troubleshooting
- Head Unit Not Powering On:
- Check all wiring connections, especially the B+ (Battery Positive) and ACC (Accessory Power) wires, to ensure they are securely connected.
- Verify the vehicle's fuse box for any blown fuses related to the stereo system.
- Steering Wheel Controls Not Working:
- Ensure the 8-pin CAN plug is correctly inserted into the head unit.
- Re-check the Canbus configuration in the head unit's factory settings (Section 4.3). Confirm the correct Canbus Brand and Car Model Year Version are selected.
- Update the head unit's MCU if recommended by the head unit manufacturer.
- Sound Issues (No Sound, Distorted Sound):
- Verify all speaker wire connections (FL+, FL-, FR+, FR-, RL+, RL-, RR+, RR-) are correct and secure.
- Ensure the head unit's audio settings are properly configured.
- Frame Fit Issues (e.g., climate control panel tight):
- Double-check that all clips and mounting points are correctly aligned and seated.
- Ensure no wires are pinched or obstructing the frame's fit.
8. Specifications
| Feature | Detail |
|---|---|
| Product Type | Car Radio Fascia (2DIN) |
| Screen Compatibility | 9-inch Android Head Units |
| Vehicle Compatibility | Ford S-MAX S MAX 1 (2006 - 2015) |
| Material | Environment-friendly ABS Plastic |
| Wiring Harness | 16PIN Connector (ISO Standard) |
| Canbus Type | Simple (RPS-FD-001) |
| Package Length | 40 cm |
| Package Width | 29 cm |
| Package Height | 11 cm |
| Package Weight | 0.45 kg |
| External Testing Certification | ROHS |
9. User Tips
- Many users report a perfect fit, making the installed unit look like it came from the factory.
- While the frame generally fits well, some users noted that the climate control panel might feel a bit tight, and some buttons could be stiff initially. Gentle adjustments during installation may help.
- Ensure the Canbus settings are correctly configured in your Android head unit's factory settings for full functionality, especially for steering wheel controls.
- For a Ford Galaxy (2009 model), verify Canbus compatibility with the seller or head unit manufacturer, as specific models might require different Canbus versions.
10. Warranty and Support
For any issues or questions regarding the product, please contact the seller directly. For detailed information on your Android head unit's operation, refer to its specific user manual.
An additional user manual in PDF format is available for download: Ownice User Manual (PDF).