VGR V-003, V-906, V-308

Contents

VGR Professional Barber Combo Instruction Manual

Models: V-003 (Hair Clipper), V-906 (Hair Trimmer), V-308 (Electric Shaver)

1. Product Overview

The VGR Professional Barber Combo offers a versatile grooming solution with three distinct tools: a hair clipper (V-003), a hair trimmer (V-906), and an electric shaver (V-308). Each device is designed for precision, durability, and ease of use, featuring powerful motors, advanced blade systems, and convenient USB charging.

VGR Professional Barber Combo showing a hair clipper, a hair trimmer, and an electric shaver.
Figure 1: VGR Professional Barber Combo (Clipper, Trimmer, Shaver)

For a detailed user manual in PDF format, please refer to the official document: VGR User Manual (PDF).

2. Safety & Warnings

Important Safety Information: Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture, unless specifically designed for wet use (e.g., wet haircut function).
  • Handle with care to avoid cuts or injuries.
  • Due to airline regulations, lubricants are not included with the product.

3. Setup

  1. **Unboxing**: Carefully remove all components from the packaging.
  2. **Initial Inspection**: Check all devices and accessories for any signs of damage. Do not use if damaged.
  3. **Remove Protective Films**: Before first use, remove any protective films from the device blades and body.
  4. **Initial Charge**: Connect the provided USB cable to the device and a certified 5V power adapter. Ensure the device is fully charged before its first use. The LED display will indicate charging status.
  5. **Attach Guide Combs**: For clippers and trimmers, select the desired cutting guide comb and securely attach it to the blade.
V-003 Hair Clipper and its accessories including guide combs and charging cable.
Figure 2: V-003 Hair Clipper and included accessories

4. Operating Instructions

4.1 General Operation

  • **Power On/Off**: Press and hold the power button for 3 seconds to turn the device on or off.
  • **Change Modes/Speeds**: Short press the power button to cycle through different speed modes (e.g., 7000 RPM, 8000 RPM, 9000 RPM Turbo). The LED display will show the current RPM and remaining battery.
Close-up of the VGR shaver's LED display showing RPM and battery percentage, with a finger pressing the power button.
Figure 3: LED Digital Display and Power Button

4.2 V-003 Hair Clipper

  • **Taper Lever**: Use the adjustable taper lever on the side of the clipper to fine-tune the cutting length without changing guide combs.
  • **Guide Combs**: Attach one of the 6 cutting guide combs (1.5mm, 3mm, 4.5mm, 6mm, 9mm, 12mm) for consistent hair lengths.
  • **Usage**: Suitable for both wet and dry haircuts.
VGR Hair Clipper highlighting the taper lever, sharper blades, longer work time, and LED display.
Figure 4: V-003 Hair Clipper Features
Diagram showing various guide comb sizes for the clipper (1.5mm, 3mm, 4.5mm, 6mm, 9mm, 12mm) and trimmer (1mm, 2mm, 3mm).
Figure 5: Guide Comb Lengths for Clipper and Trimmer

4.3 V-906 Hair Trimmer

  • **Guide Combs**: Use the 3 cutting guide combs (1mm, 2mm, 3mm) for precise trimming.
  • **Usage**: Ideal for detailing, edging, and shorter beard trims. Suitable for both wet and dry haircuts.
VGR Hair Trimmer highlighting ceramic blade, sharper blades, longer work time, and LED display.
Figure 6: V-906 Hair Trimmer Features
Close-up of VGR Hair Trimmer showing guide comb adjustment, on/off switch with turbo, and DLC coating blade.
Figure 7: V-906 Hair Trimmer Blade and Controls

4.4 V-308 Electric Shaver

  • **Precision Blades**: The double-layer black titanium foils are designed to fit facial contours for a clean shave.
  • **Usage**: For shaving the shortest stubble.
VGR Electric Shaver highlighting precision blades, LED display, longer work time, and on/off button.
Figure 8: V-308 Electric Shaver Features
Close-up of the VGR electric shaver's double black titanium foils.
Figure 9: Double Black Titanium Foils for Shaver

5. Maintenance

  • **Cleaning Blades**: After each use, turn off the device and remove any attached guide combs. Use the provided cleaning brush to remove hair clippings from the blades. For models supporting wet haircut, blades can be washed under running water. Ensure blades are dry before storage.
  • **Lubrication**: Regularly lubricate the blades with clipper oil (not included due to shipping regulations) to maintain optimal performance and extend blade life. Apply a few drops to the blades and run the device for a few seconds.
  • **Storage**: Store the devices in a dry place, away from direct sunlight and moisture. Use the protective caps to cover the blades when not in use.
  • **Battery Care**: To prolong battery life, avoid completely draining the battery frequently. Charge the device when the LED display indicates low power.

6. Troubleshooting

  • **Device Not Turning On**: Ensure the device is fully charged. If the battery is low, connect it to the USB charging cable and a power source.
  • **Poor Cutting Performance**: Clean the blades thoroughly to remove any trapped hair. Check if the blades are damaged or dull; if so, consider professional sharpening or replacement. Ensure guide combs are correctly attached.
  • **Excessive Noise/Vibration**: This could indicate a need for lubrication. Apply clipper oil to the blades. If the issue persists, inspect for loose parts or damage.
  • **Charging Issues**: Ensure the USB cable and power adapter are working correctly. Try a different cable or adapter if necessary. Check the charging port for debris.

7. Specifications

Feature Specification
Product Models V-003 (Hair Clipper), V-906 (Hair Trimmer), V-308 (Electric Shaver)
Motor Type ROTARY
RPM Up to 9000 RPM/min (with Turbo function)
Blade Material (V-003/V-308) Stainless Steel
Blade Material (V-906) Ceramic blades
Shaver Foils (V-308) Double Black Titanium
Minimum Haircut Length 0.5 - 1 mm
Length Adjustment Method Change of nozzles (guide combs) / Taper lever (V-003)
Usage Time (V-003) 250 Minutes
Charging Time (V-003) 3 Hours
Battery (V-003) 2500 mAh Li-ion
Usage Time (V-906) 240 Minutes
Charging Time (V-906) 2.5 Hours
Battery (V-906) 2000 mAh Li-ion
Usage Time (V-308) 150 Minutes
Charging Time (V-308) 2 Hours
Battery (V-308) 1200 mAh Li-ion
Input Voltage 5V
Power Type Rechargeable/Electric Both Work
Voltage Global Universal (100-240V)
Functions Wet haircut, Dry haircut, Washing knives under water, Fast Charging, Charging indication, Battery operation
Certifications CE, Dot, EAC, EPA, FCC, GMP, RoHS, TGA, UL, KC, pse, weee

8. Warranty & Support

All VGR products come with a 12-month warranty from the date of purchase.

If your item is damaged during shipping or you encounter any issues, please contact the seller directly. Ensure the item remains in its original condition when reporting damage. The seller will review your situation and provide an appropriate solution.

Manufacturer: Ningbo Woji Electric Appliance Co., Ltd.

EU Authorized Representative: Jorge Wilsone, CASTELLANA 9144, 28046 Madrid, 34-688185858

9. User Tips

  • **Professional Quality**: Users, including professional hairdressers, highly rate the quality and practicality of the VGR combo.
  • **Combo Value**: The complete combo set is noted for being very nice and practical for various grooming needs.
  • **Individual Purchase**: While offered as a combo, individual units (like the V-001, which is likely a typo for V-003) can also be purchased.
  • **Lubrication**: Remember that clipper oil is essential for blade maintenance but is not included in the package. Acquire suitable oil separately to ensure longevity and smooth operation.

© 2024 VGR. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.