Ritesdepot QJ-L032

Contents

User Manual

Remote Controlled 32W Dual-Head RGBW Fiber Optic Light Engine

Model: QJ-L032 | Brand: Ritesdepot

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Ritesdepot QJ-L032 32W Dual-Head RGBW Fiber Optic Light Engine. This versatile lighting system is designed for creating stunning starlight effects in car ceilings or various home DIY projects. Please read this manual thoroughly before use to ensure safe and optimal performance.

2. Package Contents

Please check the package for the following items:

  • 1x 32W Dual-Head RGBW Light Engine (Model: QJ-L032)
  • 1x 28-Key RF Remote Controller
  • 1x Home Power Adapter (AC85-265V input)
  • 1x Car Use Plug (DC12V input)
  • 2x Fiber Optic Cable Connectors (Waterproof)
  • (Optional) 0.75mm End Glow PMMA Fiber Optic Strands (quantity and length vary by kit)
Contents of the 32W Dual-Head RGBW Fiber Optic Light Engine kit, including the light engine, remote, app interface, power adapters, and connectors.
Figure 1: Package Contents Overview. The image shows the light engine, remote controller, smartphone app interface, power adapters, and fiber optic connectors.

3. Specifications

FeatureDetail
ModelQJ-L032
Power32W
LED TypeTwo RGBW LEDs
Input VoltageAC85-265V / DC12V
Light ColorRGBW (Red, Green, Blue, White, and mixed colors)
Fiber Head Inner Diameter20mm x 2
Light Engine Dimensions (L x W x H)132mm x 97mm x 39mm
Light Body MaterialAluminum
Control MethodsRF Remote / Bluetooth APP Control
Lifetime (Light Engine)50,000 hours
Lifetime (Fiber Optic Bundle)10 Years
Net Weight339g
CertificationCE
Diagram showing the dimensions of the LED light engine: 132mm length, 97mm width, and 39mm height.
Figure 2: Light Engine Dimensions.

4. Setup

4.1 Fiber Optic Cable Connection

  1. Align all the fiber optic cable ends. Fasten them together securely with high-temperature resistant tape (over 130°C).
  2. Pass the bundled fiber through the connector. Use the rotary tensioner to fasten it, ensuring the fiber bunch does not move and all fibers are on the same plane.
  3. Cut the fiber bunch to a flat surface using a heat-knife or blade for a clean finish.
  4. Ensure the fiber bunch head is smooth and clean. This ensures each fiber's light will be evenly distributed.
  5. Insert the entire fiber connector into the fix ring of the LED engine. Fasten the screw on top of the fix ring to secure it.
Detailed diagram showing how to connect fiber optic cables to the LED light engine, including bundling, securing, cutting, and attaching the connector.
Figure 3: Fiber Optic Connection Method. This diagram illustrates the steps for preparing and connecting the fiber optic bundle to the light engine.

4.2 Power Connection

  • For home use, connect the AC85-265V power adapter to the light engine and plug it into a standard wall outlet.
  • For car use, connect the DC12V car plug to the light engine and plug it into your vehicle's cigarette lighter socket.
  • Ensure the input voltage is correct for the chosen power source.

4.3 APP Control Setup (My Smart LED)

  1. Download APP:
    • Scan the QR code provided in the manual or on the product packaging with your smartphone.
    • For Android phones, download "My smart LED" from Google Play.
    • For Apple phones, download "My smart LED" from the Apple App Store.
  2. Connect Bluetooth Device:
    • Open Bluetooth on your mobile phone. (For Android phones, mobile positioning must also be turned on).
    • Power on the light engine.
    • Open the "My smart LED" APP. The app will automatically connect to the Bluetooth light fixture.
    • Important: Do NOT manually connect to this device via your phone's Bluetooth settings. The connection is managed solely by the APP.
    • Note: One mobile phone can connect and control multiple devices, but one device can only be connected and controlled by one mobile phone at a time.

5. Operating Instructions

The light engine can be controlled simultaneously by both the remote control and the APP.

5.1 Remote Control Functions (28-Key RF Remote)

Diagram of the 28-key remote controller with labels for each button's function, including ON/OFF, static colors, dynamic modes, music activation, and independent head control.
Figure 4: Remote Controller Layout and Functions.
  • ON/OFF: Power on/off the light engine.
  • W: Pure white light.
  • R, G, B: Red, Green, Blue static colors.
  • Color Buttons (other): Various static colors.
  • Dynamic Mode Speed / Static Color Brightness / Sound Sensitivity (+/-): Adjust these parameters.
  • JUMP1 / JUMP3 / JUMP7: Colorful jump modes (1, 3, or 7 colors).
  • FADE1 / FADE3 / FADE7: Colorful fade modes (1, 3, or 7 colors).
  • BREATH / FLASH: Colorful breath/flash modes.
  • MUSIC ON / MUSIC OFF: Activate/deactivate music-activated mode.
  • ALL / 1 / 2: Select which light head(s) to control.
    • ALL: Control both heads simultaneously.
    • 1: Control Head 1 independently.
    • 2: Control Head 2 independently.

5.2 Dual-Head Independent Control Application Description

Note: Two heads cannot be selected separately for dynamic mode.

  1. Control both heads at the same time: First, press the "ALL" button. Second, select the desired mode (static or dynamic).
  2. Independent control of each head static color: First, press button "1". Second, choose a static color. Third, press button "2". Fourth, choose a static color.
  3. One head static color, one head dynamic change: (You must select static color first and then dynamic color). First, press button "1". Second, choose a static color. Third, press button "2". Fourth, choose a dynamic color.

5.3 APP Control Functions

The "My smart LED" APP offers advanced control features:

  • 16 Million Colors: Full RGB color palette selection.
  • Brightness Adjustment: Fine-tune the light intensity.
  • Dynamic Modes: 20 pre-set dynamic modes for various effects.
  • Shooting Star Modes: Special effects to simulate shooting stars.
  • Music Mode: Light changes with the rhythm of music/sound (adjustable sensitivity).
  • Customization: Create and save your own custom color sequences and effects.
Screenshots of the My Smart LED app showing static, dynamic, sound control, twinkle, and meteor modes, along with Bluetooth connection settings.
Figure 5: APP Control Modes and Bluetooth Settings.

6. Maintenance

  • Environment: Keep the LED light engine in a dry area. It is prohibited to place it in rain or moist conditions.
  • Ventilation: The LED engine requires good ventilation. Do not place it in a sealed space or cover it with debris, as this can cause poor heat dissipation and damage the unit.
  • Cleaning: Gently wipe the exterior of the light engine with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Fiber Optic Cables: The fiber optic cables are waterproof, but the light engine itself is not.
  • Professional Service: Do not open the LED engine for inspection or attempt to change the electronic circuits yourself unless you are a qualified professional.

7. Troubleshooting

7.1 APP Connection Issues ("The device can't be connected, how to solve?")

  1. Check if the light engine has normal power supply and if your phone's Bluetooth is turned on.
  2. If other mobile phones are already connected to the light engine, disconnect them. Bluetooth 4.0 supports one-to-many connections but not many-to-many control.
  3. Verify if the device is connected in your phone's Bluetooth settings. If it is, exit the APP, reopen it, and the APP should automatically connect.
  4. If normal operation or connection still fails, close the APP from the background and reopen it.

7.2 Remote Control Not Working ("The remote control board can't control the device. What should I do?")

  1. Check if the remote control board has power. Press any button on the remote; if the indicator light does not flash, the CR2025 battery needs to be replaced.
  2. If the remote control board is working (indicator flashes), check if the green indicator on the light engine is blinking. If not, restart the light engine and test again. If the issue persists, the device may be faulty.

7.3 General Light Issues

  • Uneven Light: Ensure the fiber bunch head is smooth and clean, and all fibers are on the same plane within the connector.
  • No Light: Check power connections, ensure the light engine is turned on, and verify fiber optic cables are correctly inserted.
  • Overheating: Ensure the light engine has adequate ventilation and is not placed in a sealed area or covered.

8. User Tips

  • When installing in a car, plan your fiber optic layout carefully before securing the headliner to achieve the desired star pattern.
  • For a denser star field, consider using more fiber optic strands per square foot.
  • Experiment with both the remote and APP controls to discover all available color combinations and dynamic effects.
  • Utilize the music-activated mode for an immersive experience, especially in car interiors.

9. Warranty and Support

This Ritesdepot Fiber Optic Light Engine comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

For warranty claims or technical support, please contact your retailer or the manufacturer with your purchase details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.