VGR V-994 Professional Hair Trimmer User Manual

Introduction

This manual provides essential information for the safe and effective use of your VGR V-994 Professional Hair Trimmer. Please read all instructions carefully before operating the device and retain this manual for future reference.

Safety & Warnings

Important Safety Information:

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

• Keep the device and its cord out of reach of children under 3 years old.
• Keep away from children unless supervised by an adult.
• Do not use this product for purposes other than its intended use.
• Inspect the product before each use; do not use if damaged.
• Follow installation and operation guidelines to avoid injury.
• Do not expose to water or moisture.
• Handle with care to avoid cuts or injuries.

Package Contents

Your VGR V-994 Professional Hair Trimmer package includes the following items:

Image: Complete VGR V-994 Hair Trimmer kit including the trimmer, guide combs, charging base, brush, screwdriver, and USB cable.

• 1x VGR V-994 Hair Trimmer
• 3x Guide Combs (1.5 mm, 3 mm, 6 mm)
• 1x Extra Cover (interchangeable shell)
• 1x Cap
• 1x Charging Base
• 1x Cleaning Brush
• 1x Screwdriver
• 1x Type-C USB Charging Cable
• 3x Screws (for changing cover)

Specifications

Image: Detailed product specifications for the VGR V-994 Hair Trimmer.

Setup

1. Before First Use

• Remove all protective films from the device.

2. Charging the Trimmer

Before initial use, fully charge the trimmer. Ensure the trimmer is turned off during charging.

1. Connect the provided USB Type-C cable to the charging base.
2. Plug the other end of the USB cable into a certified 5V power adapter (not included).
3. Place the trimmer onto the charging base. The LED indicator on the trimmer will show charging status.
4. A full charge takes approximately 2.5 hours and provides up to 150 minutes of working time.

Image: The VGR V-994 trimmer placed on its charging base, connected via a Type-C USB cable.

3. Attaching Guide Combs

The VGR V-994 comes with three guide combs for different cutting lengths: 1.5 mm, 3 mm, and 6 mm.

1. Ensure the trimmer is turned off.
2. Select the desired guide comb.
3. Align the comb with the trimmer blade and push it firmly until it clicks into place.
4. To remove, gently pull the comb away from the blade.

Image: The VGR V-994 trimmer shown with its three guide combs for length adjustment.

4. Changing the Trimmer Cover (Optional)

The trimmer includes an extra cover and a screwdriver, allowing you to customize its appearance.

1. Ensure the trimmer is turned off.
2. Use the provided screwdriver to carefully remove the screws holding the current cover in place.
3. Gently detach the current cover.
4. Align the new cover and secure it with the screws. Do not overtighten.

Image: Two VGR V-994 trimmers (gold and black) demonstrating the interchangeable covers, alongside the screwdriver.

Operating Instructions

1. Power On/Off

• To turn on the device: Press and hold the power button for 3 seconds.
• To turn off the device: Press and hold the power button for 3 seconds.

2. Changing Modes/Speeds

The VGR V-994 features a high-speed vector motor with adjustable RPM.

• While the device is on, short press the power button to cycle through available speed modes (8000-10000 RPM).
• The LED indicator will show the current speed setting.

Image: Diagram illustrating the Vector Motor's intelligent speed change, which automatically increases speed when encountering resistance.

3. Hair Trimming

The VGR V-994 is suitable for both wet and dry haircuts.

1. Ensure hair is clean and detangled.
2. Attach the desired guide comb for your preferred hair length.
3. Turn on the trimmer and select the appropriate speed.
4. Hold the trimmer with the blade flat against the hair and move it slowly against the direction of hair growth.
5. For detailing or edging, remove the guide comb and use the bare blade carefully.

Image: A VGR V-994 hair trimmer being used to cut a man's hair.

Maintenance

1. Cleaning the Trimmer

Regular cleaning ensures optimal performance and extends the life of your trimmer. The blades can be washed under water.

1. Ensure the trimmer is turned off and disconnected from the charging base.
2. Remove any attached guide comb.
3. Use the provided cleaning brush to remove loose hairs from the blade and trimmer body.
4. The DLC-coated blade can be rinsed under running water. Ensure the trimmer body is not submerged unless specified as fully waterproof (refer to specifications for details).
5. Allow all parts to air dry completely before reassembling or storing.
6. Do not use corrosive or abrasive cleaners on the trimmer or its blades.

2. Blade Care

The DLC-coated blade is designed for durability and sharpness. While the product description mentions no lubricants due to airline regulations, for optimal long-term performance, it is generally recommended to apply a small drop of clipper oil to the blades after every few uses, especially after wet cleaning, to maintain sharpness and prevent rust. (Note: Lubricants are not included in the package.)

3. Storage

After use, turn off the device and store it in a dry place. Keep away from children.

Troubleshooting

Warranty & Support

All VGR products come with a 12-month warranty from the date of purchase.

If the item is damaged during shipping or you encounter any issues, please contact the seller directly. Ensure the item remains in its original condition when reporting damage.

For further assistance or inquiries, please refer to the official VGR support channels or contact your retailer.

Manufacturer: Ningbo Woji Electric Appliance Co., Ltd., CN-CN-No. 656, Kaifa East Road, Zhouxiang Town, Cixi City, Ningbo, Zhejiang.

EU Authorized Representative: Jorge Wilsone, CASTELLANA 9144, 28046 Madrid, 34-688185858

A user manual in PDF format is available for download: VGR V-994 User Manual (PDF)