1. Introduction
The Redragon CA606 is a high-performance Mid Tower ATX computer chassis designed for gaming and high-end PC builds. It features a 270° full-view tempered glass panel, three pre-installed 120mm fans for optimal airflow, and a user-friendly design for tool-free installation and efficient cable management. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Redragon CA606 chassis.
2. Setup and Installation
The Redragon CA606 chassis is designed for straightforward assembly, featuring tool-free installation for many components. Please follow these guidelines for a smooth build process.
2.1 Component Compatibility
Ensure your components meet the following specifications for optimal fit:
- Motherboard Support: ATX, Micro ATX, Micro-ATX
- CPU Cooler Height: Maximum 165 mm
- GPU Length: Maximum 400 mm
- PSU Length: Maximum 200 mm (ATX Power Model)
2.2 Fan and Cooling System
The chassis comes with 3 x 120mm fans pre-installed to ensure advanced airflow and efficient cooling. These fans operate within a speed range of 500-1800RPM±10%.
Additional fan configurations are supported:
- Maximum 9 x 120mm fans
- Alternatively, 6 x 120mm fans + 2 x 140mm fans
2.3 Tool-Free Installation
The chassis features a design that simplifies the PC building process, allowing for easy removal and installation of components without requiring specialized tools.
3. Operating Instructions
Once your PC is assembled within the Redragon CA606 chassis, operating it is straightforward using the front I/O panel.
3.1 Front I/O Panel
The front panel provides convenient access to essential ports and controls:
- Power Button: Press to turn the system on or off.
- Restart Button: Press to restart the system.
- USB 3.0 Port: For high-speed data transfer with compatible devices.
- USB Ports: For connecting various USB devices.
- Headphone & Mic Combo Jack: For connecting headsets with a single 3.5mm TRRS connector.
3.2 RGB Lighting
The chassis supports fixed color RGB lighting, providing aesthetic illumination for your build. The pre-installed fans feature this lighting. Control of the RGB lighting is typically managed through your motherboard's software or a dedicated controller, if included with your specific fan setup.
4. Maintenance
Regular maintenance helps ensure optimal performance and longevity of your PC components.
4.1 Dust Management
The Redragon CA606 chassis features a full-coverage, high-density 0.8mm dust-proof mesh design to minimize dust accumulation inside the case. Regularly clean these filters to maintain efficient airflow.
- Cleaning Dust Filters: Gently remove the mesh filters (if removable) and clean them with compressed air or a soft brush. Reinstall them securely.
- Internal Cleaning: Periodically use compressed air to clear dust from internal components like fans, heatsinks, and graphics cards. Ensure the system is powered off and unplugged before cleaning.
4.2 Cable Management
The chassis is designed for easy cable management. Ensure cables are neatly routed and secured to avoid obstructing airflow or interfering with components. This also makes future maintenance easier.
5. Troubleshooting
This section addresses common issues you might encounter with your PC chassis. For issues related to specific internal components (CPU, GPU, Motherboard), please refer to their respective manuals.
5.1 Power Issues
- System not powering on:
- Ensure the power supply unit (PSU) is properly connected to the motherboard and all components.
- Verify the PSU switch is in the "ON" position.
- Check that the front panel power button cable is correctly connected to the motherboard's F_PANEL header.
5.2 Fan Issues
- Fans not spinning or making unusual noise:
- Ensure all fan cables are securely connected to the motherboard or fan controller.
- Check for any obstructions preventing fan blades from spinning.
- Clean dust from fan blades and housings.
5.3 Front I/O Port Issues
- USB ports or audio jack not working:
- Verify that the front panel USB and audio cables are correctly connected to the corresponding headers on your motherboard.
- Ensure motherboard drivers are installed and up to date.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | REDRAGON |
| Model Number | CA-606B-2F |
| Type | Mid Tower |
| Chassis Type | Desktops |
| Form Factor | ATX |
| Power Model | ATX |
| Material | IRON, Tempered glass |
| Side Panel Window | Yes |
| RGB Support | Fixed Color |
| Case Weight | 6.85 kg |
| Case Size (L*W*H) | 54.00 * 28.00 * 50.50 cm |
| Origin | Mainland China |
| Pre-installed Fans | 3 x 120mm |
| Fan Speed | 500-1800RPM±10% |
| Max CPU Cooler Height | ≤165 mm |
| Max GPU Length | ≤400 mm |
| Max PSU Length | ≤200 mm |
7. User Tips
Based on common user inquiries and experiences, here are some helpful tips:
- This is a PC Chassis, Not a Complete PC: The Redragon CA606 is an empty computer case. It requires you to install a motherboard, CPU, GPU, RAM, storage, and power supply unit to function as a complete computer.
- Verify Component Dimensions: Before purchasing or installing components, always double-check their dimensions against the chassis's maximum supported sizes for CPU cooler height, GPU length, and PSU length to ensure compatibility.
- Cable Management is Key: Utilize the chassis's cable management features to keep the interior tidy. This not only improves aesthetics but also enhances airflow and makes future upgrades or troubleshooting easier.
- Regular Dust Filter Cleaning: To maintain optimal cooling performance and prevent dust buildup on your components, regularly clean the dust filters.
8. Warranty and Support
For warranty information and technical support, please refer to the official Redragon website or contact their customer service directly. Keep your proof of purchase for any warranty claims.
The manufacturer is committed to product quality and offers support for any manufacturing defects. Please note that this manual covers the chassis itself; warranty and support for individual components installed within the chassis are provided by their respective manufacturers.
