Manhot mh01/mh02/mh03/mh04

Contents

Manhot Matter WiFi Smart Wall Light Switch User Manual

Models: mh01, mh02, mh03, mh04

1. Introduction

Thank you for choosing the Manhot Matter WiFi Smart Wall Light Switch. This smart switch allows you to control your lighting with physical buttons, through a smartphone app, or via voice commands using smart home platforms like Apple HomeKit, Google Home, and Amazon Alexa. It is available in 1, 2, 3, and 4 gang configurations and supports both neutral wire and no-neutral wire installations.

Manhot Matter WiFi Smart Switch overview showing 1, 2, 3, and 4 gang switches with logos for Apple HomeKit, Siri Voice, Google Home, and Amazon Alexa.

Figure 1: Manhot Matter WiFi Smart Switch product overview.

2. Safety Information

  • Always turn off power at the circuit breaker before installation, maintenance, or removal of the switch.
  • Installation should be performed by a qualified electrician or in accordance with local electrical codes.
  • Do not install with wet hands.
  • This product is designed for Wi-Fi networks and is not compatible with Zigbee.
  • Ensure the correct wiring configuration (with or without neutral wire) is used as per the product model.
  • Use only with compatible lighting loads.

3. Package Contents

The package typically includes:

  • Manhot Matter WiFi Smart Wall Light Switch (1, 2, 3, or 4 gang)
  • Mounting Screws
  • Iron Mounting Plate
  • Capacitor (for no-neutral wire versions, to prevent flickering)
  • User Manual (this document)

4. Specifications

Attribute Value
Model Numbers mh01, mh02, mh03, mh04
Voltage 220V (Please check product label for specific voltage. Some models may support 110V, but 220V is standard.)
Origin Mainland China
Certification CE
Connectivity Matter WiFi + Bluetooth
Gang Options 1-gang, 2-gang, 3-gang, 4-gang
Wiring No Neutral Wire Required / Neutral Wire Required (version dependent)
Product Dimensions (Faceplate) 85mm x 85mm
Product size diagram showing dimensions of the smart switch faceplate as 85mm by 85mm.

Figure 2: Product Size Diagram.

5. Installation

Important: Before starting, ensure the power is turned OFF at the circuit breaker for the light switch you are replacing. Verify the power is off by flipping your existing switch a few times.

  1. Unpack the Switch: Open the package and carefully remove the smart switch and its iron mounting plate.

    Installation step 1: Unpacking the smart switch and its separate iron mounting plate.

    Figure 3: Unpacking the switch and mounting plate.

  2. Secure the Iron Plate: Attach the iron mounting plate to the wall mounting box using the provided screws. Ensure it is firmly in place.

    Installation step 2: Securing the iron mounting plate to the electrical box in the wall.

    Figure 4: Securing the iron plate.

  3. Wiring: Connect the electrical wires to the terminals on the back of the smart switch. Refer to the appropriate circuit connection diagram below based on your wiring type (with or without neutral wire). Ensure all connections are secure.

    Circuit Connection Diagrams:

    Wiring diagram for a smart switch without a neutral wire, showing connections for Live In, Live Out, and the capacitor.

    Figure 5: No Neutral Wire Connection

    Wiring diagram for a smart switch with a neutral wire, showing connections for Live In, Live Out, and Neutral.

    Figure 6: With Neutral Wire Connection

  4. Mount the Switch: Carefully snap the smart switch into the secured iron plate. Ensure it clicks into place and is flush with the wall.

    Installation step 3: Snapping the smart switch module into the iron mounting plate.

    Figure 7: Snapping the switch into the plate.

    Installation step 4: Final view of the smart switch securely installed on the wall.

    Figure 8: Final switch installation.

Once installed, restore power at the circuit breaker.

6. Setup and App Pairing

The Manhot Smart Switch uses the "Smart Life" app for initial setup and control.

  1. Install the "Smart Life" App: Download the "Smart Life" app from your smartphone's app store (iOS or Android) or scan the QR code below.

    QR code for downloading the Smart Life App.

    Figure 9: Smart Life App QR Code.

  2. Enter Pairing Mode: After restoring power, the indicator light on the switch should blink rapidly. If not, press and hold the ON/OFF button for 5 seconds to reset and enter pairing mode.

  3. Add Device in App: Open the Smart Life app, register or log in, and follow the on-screen instructions to add a new device. Select the light switch category. The app will guide you through connecting the switch to your Wi-Fi network.

    Screenshot of the Smart Life App interface introduction.

    Figure 10: Smart Life App Interface Introduction.

    Screenshot of the Smart Life App operation interface functions.

    Figure 11: Smart Life App Operation Interface Functions.

  4. Integrate with Smart Home Platforms:

    • Apple HomeKit: Once paired with the Smart Life app, you can add the switch to Apple HomeKit. Open the Apple Home app, tap '+', and select 'Add Accessory'. Scan the Matter QR code on your device or packaging, or manually enter the setup code. The switch will then be controllable via the Home app and Siri.

      Screenshot showing Apple Home remote control setup with an iPhone controlling a smart switch.

      Figure 12: Apple Home Remote Control Setup.

    • Google Home/Amazon Alexa: Link your Smart Life account within the Google Home or Amazon Alexa app. Once linked, your Manhot smart switches will appear and can be controlled via voice commands or the respective apps. For Google Nest Hub, you can often register directly using the QR code.

7. Operating Instructions

Physical Control:

The switch features physical push buttons for direct control of your lights. The buttons provide a tactile feedback similar to a mouse click.

App Control:

Use the Smart Life app to control your lights remotely, set schedules, and configure various settings.

  • Indicator Light Status: You can define the behavior of the indicator light (e.g., Off, On/Off Status, Switch Position) through the app settings.

    Screenshot of the app showing options for Indicator Light Status: Off, On/Off Status, Switch Position.

    Figure 13: Indicator Light Status Settings.

  • Timing Control: Schedule your lights to turn on or off at specific times or after a countdown using the timing function in the Smart Life app.

    Screenshot of the app showing timing control options for scheduling lights to turn on or off.

    Figure 14: Timing Control Setup.

  • Restart Status Definition Function: Configure the switch's behavior after a power outage. You can set it to resume its last status, turn off, or turn on.

    Screenshot of the app showing Restart Status options: Power-off, Power-on, Restart Memory.

    Figure 15: Restart Status Definition.

8. User Tips

  • Flickering Prevention: If you experience flickering with LED lights, especially with no-neutral wire installations, ensure the included capacitor is installed correctly at the light fixture. This is particularly effective for lower wattage lights (e.g., below 60W LED).
  • SmartThings Integration: For SmartThings users, if direct integration is challenging, try creating a button in the Smart Life app's 'One-Click Execution' feature, then re-sync SmartThings to discover the new control.
  • Installation Fit: The switch is designed to fit standard apartment switch box sizes, making replacement straightforward.
  • Wiring Space: When installing, ensure wires are trimmed to an appropriate length to avoid tightness within the wall box.

9. Troubleshooting

  • Switch Not Responding:

    • Check if the circuit breaker is ON.
    • Ensure wiring connections are secure and correct according to the diagrams.
    • Verify the switch is receiving power.
  • Flickering Lights:

    • For no-neutral wire installations, ensure the capacitor is installed at the light fixture.
    • This issue is more common with low-wattage LED bulbs. Consider using higher wattage LED bulbs (e.g., 60W LED) if flickering persists.
  • Cannot Connect to Wi-Fi/App:

    • Ensure your Wi-Fi network is 2.4GHz. The switch may not support 5GHz networks.
    • Confirm the switch is in rapid blinking pairing mode. If not, reset it by holding the ON/OFF button for 5 seconds.
    • Check your Wi-Fi password and network stability.
    • Ensure your phone is connected to the same 2.4GHz Wi-Fi network during pairing.
  • Voltage Compatibility: The standard voltage is 220V. If your region uses 110V, please verify the specific model you purchased supports 110V. Using an incorrect voltage can damage the device and pose a safety risk.

  • Not 3-Way Compatible: This smart switch is designed for single-pole applications and is not explicitly stated to be 3-way compatible. Refer to the wiring diagrams for supported configurations.

10. Maintenance

  • Clean the switch surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Ensure the switch is kept dry and away from excessive moisture.
  • Periodically check for firmware updates through the Smart Life app to ensure optimal performance and security.

11. Warranty and Support

For detailed warranty information and technical support, please refer to the official Manhot website or contact your retailer. You may also find additional resources and FAQs within the Smart Life app.

A comprehensive user manual in PDF format is available for download: View User Manual (PDF)

12. Product Overview Video

Watch this video for a visual overview of the Manhot Matter WiFi Smart Wall Light Switch:

Video: A 360-degree view of the Manhot Matter WiFi Smart Wall Light Switches in various gang configurations.

13. Applicable Scenarios

The Manhot Matter WiFi Smart Wall Light Switch is versatile and suitable for various environments, enhancing convenience and smart control in:

  • Bedrooms
  • Living Rooms
  • Bathrooms
  • Kitchens
  • Offices
  • Shopping Malls
  • And more...
Collage of images showing the smart switch installed in various settings like a bedroom, living room, bathroom, kitchen, office, and shopping mall.

Figure 16: Smart Switch in various application scenarios.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.