1. Introduction
Thank you for choosing QCY AilyBuds Pro+ Wireless Earbuds. These semi-in-ear earbuds feature Adaptive Active Noise Cancellation (ANC), Hi-Res Audio with LDAC support, Bluetooth 5.3 for stable connections, and multipoint connection capabilities. This manual provides detailed instructions to help you get the most out of your new earbuds.
2. Package Contents
The package includes the following items:
- User Manual
- Charging Case
- Charging Cable (Type-C)
3. Safety Information
Important Safety Precautions:
- Please carefully read and retain this user manual before using the product.
- If the product is not used for an extended period (more than 2 weeks), please recharge it.
- You must choose a charger produced by a legitimate manufacturer and certified by the national safety authority.
- Do not disassemble or modify the battery, insert foreign objects, expose it to high temperatures, or immerse it in water or other liquids to prevent battery leakage, overheating, ignition, or explosion. Battery replacement should only be done by the manufacturer.
- Do not drop, crush, or puncture the battery. Prevent external pressure that may lead to internal short circuits and overheating.
- Do not dismantle or modify the earbuds for any reason, as it may result in fire, electronic breakdown, or permanent damage to the product.
- Do not expose the product to extremely low or high temperatures (below 0°C or above 45°C).
- Do not point the product indicator light near the eyes of children or animals.
- Do not use the product during thunderstorms, as it may cause abnormal operation and increase the risk of electric shock.
- Do not use oil or other volatile liquids to clean the product.
- Avoid using this device for long periods at high volume, as there is a risk of hearing damage.
Product Harmful Substances Name and Content
| Part Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr(VI)) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Outer Casing | O | O | O | O | O | O |
| Circuit Board Assembly | X | O | O | O | O | O |
| Battery | O | O | O | O | O | O |
| Charging Cable | X | O | O | O | O | O |
| Accessories | O | O | O | O | O | O |
O: Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirements specified in GB/T 26572.
X: Indicates that the content of the hazardous substance in at least one homogeneous material of the part exceeds the limit requirements specified in GB/T 26572.
Environmental Protection Use Period: As stated in this manual, under normal use conditions, the environmental protection use period of this product is 10 years. During this period, the product will not leak any hazardous substances, and the product can be recycled in accordance with local regulations.
4. Getting Started
4.1 Familiarizing with Earbuds
- Sound Hole: Audio output.
- LED: Status indicator.
- Touch Panel: For controlling playback, calls, and ANC modes.
- Pogo Pins: Charging contacts for earbuds.
- Type-C Charging Port: For charging the case.
Before use, download and install the QCY APP client on your mobile phone for a more convenient earbud control experience.
4.2 Initial Pairing
- Take out both earbuds, peel off the isolation film from each, and place them back into the charging case. Close the lid to activate the new device.
- Retrieve both earbuds again.
- Refresh your phone's Bluetooth devices list, pair with "QCY AilyBuds Pro+" and complete the setup.
Note: Opening the charging case turns on the earbuds. If not, try again after charging.
4.3 Multi-Device Connection
To enable multi-device connection, activate it in the QCY APP settings.
- Power on the earbuds to initiate pairing. After connecting to Device A, turn off Bluetooth on the phone. The earbuds will enter pairing mode again.
- Enable Bluetooth on Device B and select "QCY AilyBuds Pro+" for pairing.
- On Device A, turn on Bluetooth and click the paired earbuds name. Successful pairing means the earbuds are now connected to both devices simultaneously.
Note: The one-drag-two function and LDAC audio decoding format cannot be enabled simultaneously.
4.4 One-Click Device Switching
To switch between paired devices (e.g., from Device A to Device B):
- Open the lid, keep both earbuds in the charging case, and press the case button for about 3 seconds. The earbuds will flash red once. Search for them on the device and click to connect.
4.5 Factory Reset
This method is used in case of connection issues:
- Place the earbuds in the charging case, open the lid, and press the charging case button for 10 seconds. The earbuds will flash red 5 times, indicating the reset is complete after the blinking stops.
After the factory reset, follow the initial pairing method to connect for normal usage.
5. Operation
5.1 Wearing Instructions
- Properly wear the earbuds on both the left and right sides. After wearing them, you can make slight adjustments by rotating to find a personally comfortable and secure position.
- Ensure the microphone opening is facing downward towards the mouth.
- Incorrect earbuds placement may affect both calls and hearing to varying degrees. If the fit is not snug enough, the ANC noise cancellation effectiveness may decrease. Try adjusting the wearing angle and direction before reactivating the adaptive noise cancellation mode.
5.2 Controls (Touch Panel Functions)
- Power On: Open the charging case (earbuds inside) or, if the earbuds are outside the case, long-press the touch panel for 1.5 seconds.
- Power Off: Place the earbuds into the charging case and close the lid.
- Answer/End Call: Double-tap the touch panel.
- Reject Call: Long-press the touch panel for 1.5 seconds.
- Play/Pause: Double-tap the touch panel.
- Next Track: Triple-tap the right ear touch panel.
- Voice Assistant: Triple-tap the left ear touch panel.
- Low Latency: Long-press the left ear touch panel.
- ANC Mode: Long-press the right ear touch panel to toggle the Adaptive ANC switch.
5.3 Charging
- Earbuds Charging: While charging, the red light stays on and turns off when fully charged.
- Charging Case Charging: During charging, the red light stays on. Fully charged, the white light stays on.
- Charging Case Battery Status:
- Sufficient battery: When the charging case is opened, the white light will stay on for 5 seconds before turning off.
- Low battery: When the charging case is opened, the red light will stay on for 5 seconds before turning off.
- Insufficient battery: When the charging case has insufficient battery, the red light will quickly flash three times before turning off.
6. Maintenance
- Clean the earbuds and charging case regularly with a soft, dry cloth.
- Avoid exposing the earbuds to extreme temperatures, direct sunlight, or liquids.
- Do not use harsh chemicals or abrasive cleaners.
- Store the earbuds in their charging case when not in use to protect them from dust and damage.
7. Troubleshooting (FAQ)
- Q: Only one earbud has sound, what should I do?
A: Place both earbuds back into the charging case and close the lid. Then take them out again to check if both earbuds have sound. If only one earbud still has sound, perform a factory reset on both earbuds. - Q: My phone cannot find the earbuds, what should I do?
A: Delete the pairing record on your phone, then search and pair again. - Q: No sound during music playback/calls, what should I do?
A: For Android phones, click the settings icon next to the Bluetooth connection name, turn off "phone audio" and "media audio", then turn them back on. If there is still no sound, re-pair the earbuds with your phone. - Q: Why is there a delay in video/games?
A: Due to factors such as the usage environment, network, and phone codec, there may be varying degrees of delay when the phone transmits audio data to the earbuds. - Q: Why is the sound stuttering/intermittent?
A: If there are many Wi-Fi, 5G/4G signals, high-power electrical appliances, etc., in the surrounding environment during use, it may cause stuttering or intermittent sound. Try changing the environment or re-pairing.
8. Specifications
| Feature | Detail |
|---|---|
| Material | PVC, ABS |
| Weight | 36.8g |
| Battery Capacity | 350mAh |
| Battery Life (up to) | 28 Hours |
| Voice Assistant Built-in | Yes |
| Maximum Wireless Range | 10m-20m |
| NFC Technology | No |
| Sound Isolating | Yes |
| Category | Earphones & Headphones |
| Earcups Type | Semi-open |
| Number Of Drivers | 6 |
| Charging Method | Cable |
| Headphone Pads Material | Other |
| Driver Diameter | 13mm |
| Impedance Range | up to 32 Ω |
| Bluetooth Version | 5.3 |
| Features | Waterproof, Active Noise Cancelling, Dual Connection |
| Codecs | LDAC |
| With Microphone | Yes |
| Is Wireless | Yes |
| Support APP | Yes |
| Waterproof | Yes |
| Line Length | 0m |
| Plug Type | None |
| Function | For Internet Bar, for Video Game, Common Headphone, For Mobile Phone, Sport, For Outdoor, For Office, For Study |
| Active Noise-Cancellation | Yes |
| Volume Control | Yes |
| Control Button | Yes |
| Vocalism Principle | Dynamic |
| Wireless Type | Bluetooth |
| Connectors | Type C |
| Communication | Wireless |
| Style | Tws in-ear headphones |
| Certification | CE, FCC, RoHS, BQB |
| Origin | Mainland China |
| Support Memory Card | No |
9. User Tips
- Secure Fit: Users have noted that the earbuds provide a secure fit, even during activities like cycling, preventing them from falling out.
- Optimal Audio: For the best sound experience, adjust the audio settings using the QCY app.
- Comfort: The semi-in-ear design is designed for comfort, making them suitable for long periods of use.
10. Warranty & Support
10.1 Manufacturer Warranty
Your QCY product purchase is covered by a one-year limited manufacturer warranty from the date of delivery. Please ensure you retain your purchase receipt. If any defects occur due to quality issues within the warranty period, kindly bring both the warranty card and the purchase receipt to the authorized dealer for complimentary replacement services.
Warranty Exclusions (but not limited to):
- Improper or inadequate maintenance or modification.
- Accident, misuse, abuse, contamination, or other external causes.
- The use of unspecified adapter and accessories.
- Malfunctions or damages resulting from natural disasters, earthquakes, lightning, abnormal voltage, or environmental factors.
- Damages that occur as a result of one's failure to follow the instructions.
10.2 Contact Information
For after-sales service, please contact customer service:
- Phone: 4008-306-708
- Website: www.qcy.com
- Manufacturer: Dongguan Hele Electronics Co., Ltd.
- Address: No. 325 Yuehui Rd., Daojiao Town, Dongguan City, Guangdong Province, China
11. Product Media
11.1 Product Features Video
11.2 Key Features Visuals