QCY Melobuds N50

Contents

QCY Melobuds N50 ANC Wireless Earphone User Manual

Model: Melobuds N50 | Brand: QCY

1. Introduction

Thank you for choosing the QCY Melobuds N50 ANC Wireless Earphones. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your device. Please read it carefully before use and keep it for future reference.

For an enhanced experience and access to more features, please download and install the official QCY mobile APP.

2. Package Contents

The package typically includes the following items:

  • QCY Melobuds N50 Earbuds (Left and Right)
  • Charging Case
  • Eartips (various sizes, typically S, M, L)
  • Type-C Charging Cable
  • User Manual
QCY Melobuds N50 Earbuds and Charging Case
QCY Melobuds N50 Earbuds and Charging Case
Diagram of earbud components: LED, Touch panel, Pogo pins, Charging metal contacts, Mic, Type-C cable, Eartips
Earbud Components and Package Contents

3. Setup

3.1 Choosing Eartips

The medium-sized eartips are suitable for most users. It is recommended to start with the medium eartips and adjust to a size that provides a comfortable and secure fit for optimal sound quality and noise cancellation.

3.2 First-Time Connection (Pairing)

  1. Pick up both earbuds from the charging case. Remove their isolation films (if present) and place them back into the case. Close the lid to activate them.
  2. Open the charging case again and take out both earbuds.
  3. On your phone, open Bluetooth settings, search for 'QCY MeloBuds N50' in the list of available devices, and tap to connect.

3.3 Multi-Point Connection

The QCY Melobuds N50 supports connecting to two devices simultaneously. Follow these steps:

  1. Ensure the earbuds are powered on and in pairing mode. Connect them to Device A (e.g., your primary phone).
  2. After successful connection to Device A, turn off Bluetooth on Device A. The earbuds will re-enter pairing mode.
  3. On Device B (e.g., a tablet or secondary phone), search for 'QCY MeloBuds N50' and tap to connect.
  4. On Device A, turn on Bluetooth and tap 'QCY MeloBuds N50' in the paired devices list to complete the multi-point connection. The earbuds are now connected to both devices.
Diagram illustrating multi-point connection between earbuds, a smartphone (Device A), and a tablet (Device B)
Multi-Point Connection Diagram

3.4 How to Wear

  1. Gently insert the earbuds into your ears and rotate them to find a comfortable and secure fit.
  2. Ensure the microphone is pointing towards your mouth for optimal call quality.

Improper wear may lead to a suboptimal audio experience or call quality.

Diagram showing the correct way to wear earbuds for optimal fit and microphone positioning
Correct Earbud Wearing Method

4. Operating Instructions

4.1 Power On/Off

  • Power On: Open the charging case lid and take out the earbuds. Alternatively, if earbuds are outside the case, touch and hold the touch panel for approximately 2 seconds.
  • Power Off: Place the earbuds back into the charging case and close the lid.

4.2 Touch Panel Controls

  • Answer/End Call: Double-touch either earbud's touch panel.
  • Ignore Call: Touch and hold either earbud's touch panel for approximately 1.5 seconds.
  • Play/Pause Music: Double-touch either earbud's touch panel.
  • Skip Track Forward: Triple-touch the right earbud's touch panel.
  • Voice Assistant: Triple-touch the left earbud's touch panel.
  • Low Latency Mode: Touch and hold the left earbud's touch panel.
  • Switch ANC Mode: Touch and hold the right earbud's touch panel to cycle between ANC On, ANC Off, and Transparency Mode.

4.3 Charging

  • Earbuds: Place the earbuds into the charging case. The earbud LEDs will glow solid red during charging and turn white for 10 seconds when fully charged.
  • Charging Case: Connect the Type-C charging cable to the case and a power source. The case's LED will blink white during charging and turn solid white when fully charged.

4.4 LED Indicators

  • Earbuds Charging: Solid red (charging), Solid white for 10s (fully charged).
  • Case Charging: Blinking white (charging), Solid white (fully charged).
  • Case Battery Level: If the case has sufficient power, the LED will turn white for 4 seconds when earbuds are placed in. If the power is low, the LED will blink white for 4 seconds when earbuds are placed in.

4.5 Smart Noise Cancelling (ANC)

The QCY Melobuds N50 features adaptive ANC noise cancelling that detects external noises and automatically selects a suitable level of noise cancellation for your surroundings, achieving up to -45dB noise reduction.

Diagram illustrating Smart Noise Cancelling with -45dB noise reduction
Smart Noise Cancelling Feature

4.6 Transparent Mode

This mode allows you to enjoy your music while remaining aware of your surroundings, including voices and important notifications, ensuring safety on-the-go. It often includes a 'Vocal Enhance' mode.

Image of a person wearing earbuds, demonstrating Transparent Mode with 'Vocal Enhance mode'
Transparent Mode in Use

4.7 Crystal-clear Calls

The earbuds adopt a true 6-microphone system with AI technology and an anti-wind noise design to pick up voices clearly while significantly reducing background noise.

Diagram showing the internal microphone setup (Feedback Mic, Feedforward Mic, Talk Mic) for Crystal-clear Calls
6-Mic System for Clear Calls

4.8 Immersive Audio Experience

Equipped with 12mm bio-diaphragm dynamic drivers, the earbuds deliver powerful and detailed sound, allowing you to enjoy music as the artist intended.

Exploded view diagram of the 12mm bio-diaphragm dynamic driver
12mm Bio-Diaphragm Dynamic Driver

4.9 Bluetooth 5.4

The earbuds utilize Bluetooth 5.4 technology for stable and efficient wireless connectivity.

5. Maintenance

  • Cleaning: Do not use oil or other volatile liquids to clean the product. Use a soft, dry cloth to wipe the earbuds and charging case.
  • Storage: If the product is not used for an extended period (more than 2 weeks), please recharge it to maintain battery health. Store in a cool, dry place away from direct sunlight and extreme temperatures.

6. Troubleshooting

6.1 Common Issues and Solutions

  • Only one earbud has sound: Place both earbuds back into the charging case, close the lid, then take them out again. If the issue persists, perform a factory reset.
  • Phone prompts 'unable to connect': Delete the pairing record for 'QCY MeloBuds N50' on your phone, then search and pair again.
  • No sound during music/calls: For Android phones, check Bluetooth settings for 'QCY MeloBuds N50'. Click the settings icon, turn off and then re-enable phone audio and media audio. If still no sound, re-pair the earbuds with the phone.
  • Audio delay in video/games: Audio delay can be affected by the usage environment, network conditions, and phone codec. Try changing your environment or re-pairing.
  • Sound stuttering/disconnection: This can occur due to interference from strong Wi-Fi, 5G/4G signals, or high-power electrical appliances in the vicinity. Try moving to a different environment or re-pairing the earbuds.

6.2 Factory Reset

If you experience persistent connection issues, you can perform a factory reset:

  1. Ensure both earbuds are outside the charging case and disconnected from all devices.
  2. Tap both earbuds' touch panels 5 times simultaneously. The earbud LEDs will blink white 5 times to indicate a successful reset.
  3. After the reset, refer to the 'First-Time Connection' section to pair the earbuds with your device again.

7. Specifications

AttributeValue
Brand NameQCY
ModelMelobuds N50
MaterialPVC, ABS
Battery Capacity (Earbuds)380mA (Charging Case capacity, typical for earbuds is smaller)
Battery Life (up to)28 hours (total with charging case)
Voice Assistant Built-inYes
Maximum Wireless Range10m-20m
NFC TechnologyNo
Sound IsolatingYes
Earcups TypeSealed
Number Of Drivers6 (This likely refers to the 6-mic system, not audio drivers)
Charging MethodCharging case
Driver Diameter12mm
Bluetooth VersionOther (Likely 5.4 as per product title)
FeaturesWaterproof, Active Noise Cancelling, Dual Connection
CodecsSBC
With MicrophoneYes
Is wirelessYes
Support APPYes
WaterproofYes
Functionfor Video Game, Common Headphone, For Mobile Phone, Sport, For Office, For Study
Active Noise-CancellationYes
Volume ControlYes
Control ButtonYes
Vocalism PrincipleDynamic
Wireless TypeBluetooth
ConnectorsType-C
CommunicationTrue wireless
StyleWired in-ear headphones (This is likely a misclassification, as it's a TWS product)
CertificationCE, FCC, RoHS, BQB
OriginMainland China
Support Memory CardNo

8. User Tips

  • Multipoint Connection: Take advantage of the multipoint connection feature to seamlessly switch between two connected devices, such as your phone and tablet.
  • QCY App: Download the official QCY app for additional features and customization options to enhance your listening experience.
  • Sound Quality: Users often praise the Melobuds N50 for their excellent bass and overall sound quality, especially considering their affordable price.
  • Noise Cancellation: The active noise cancellation (ANC) feature is reported to work effectively, providing a good level of noise reduction for an immersive experience.

9. Safety Precautions

To ensure safe and proper use of your QCY Melobuds N50, please observe the following precautions:

  • Always read and retain this user manual before using the product.
  • Recharge the product if it has not been used for an extended period (more than 2 weeks).
  • Use only chargers produced by legitimate manufacturers and certified by national safety authorities.
  • Do not disassemble or modify the battery, insert foreign objects, expose it to high temperatures, or immerse it in water or other liquids. Battery replacement should only be performed by the manufacturer.
  • Avoid dropping, crushing, or puncturing the battery to prevent internal short circuits and overheating.
  • Do not dismantle or modify the earbuds for any reason, as this may lead to fire, electronic breakdown, or permanent damage.
  • Avoid exposing the product to extremely low (below 0°C) or high (above 45°C) temperatures.
  • Do not direct the product's indicator light near the eyes of children or animals.
  • Avoid using the product during thunderstorms, as it may cause abnormal operation and increase the risk of electric shock.
  • Do not use oil or other volatile liquids to clean the product.
  • Avoid using this device for long periods at high volume to prevent hearing damage.

10. Warranty and Support

10.1 Warranty Information

Your QCY product purchase is covered by a one-year limited manufacturer warranty from the date of delivery. Please retain your purchase receipt as proof of purchase. For any defects due to quality issues within the warranty period, kindly present both the warranty card and the purchase receipt to an authorized dealer for complimentary replacement services.

Warranty Void Conditions:

The manufacturer's warranty is void under, but not limited to, the following circumstances:

  • Improper or inadequate maintenance or modification.
  • Accident, misuse, abuse, contamination, or other external causes.
  • Use of unspecified adapters and accessories.
  • Malfunctions or damages resulting from natural disasters, earthquakes, lightning, abnormal voltage, or environmental factors.
  • Damages occurring as a result of failure to follow the instructions in this manual.

10.2 Contact Support

For after-sales service or support, please contact customer service at: 4008-306-708.

Manufacturer: Dongguan Hete Electronics Co., Ltd.
Address: No. 325 Yuehui Rd., Daojian Town, Dongguan City, Guangdong Province, China.

11. Environmental Information

11.1 Product Hazardous Substances and Content

This table is prepared in accordance with the provisions of SJ/T 11364.

Part NameHazardous Substances
Lead (Pb)Mercury (Hg)Cadmium (Cd)Hexavalent Chromium (Cr(VI))Polybrominated Biphenyls (PBB)Polybrominated Diphenyl Ethers (PBDE)
ShellOOOOOO
Circuit Board AssemblyXOOOOO
BatteryOOOOOO
Charging CableXOOOOO
AccessoriesOOOOOO

Legend:
O: Indicates that the hazardous substance content in all homogeneous materials of this part is below the limit requirements specified in GB/T 26572.
X: Indicates that the hazardous substance content in at least one homogeneous material of this part exceeds the limit requirements specified in GB/T 26572.

11.2 Environmental Use Period

Under normal operating conditions, the environmental use period for this product is 10 years. During this period, the product will not leak any hazardous substances and can be recycled in accordance with local regulations.

© QCY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.