1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your original Apple MacBook Pro 13-inch A1706 Logic Board. This component is compatible with MacBook Pro models from late 2016 and mid-2017, featuring various configurations of Intel Core i5 or i7 processors, 8GB or 16GB RAM, and 256GB, 512GB, or 1TB SSD storage.
2. Safety & Warnings
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
- Handle with care to avoid cuts or injuries.
- Always use appropriate anti-static precautions (e.g., anti-static wrist strap) when handling the logic board to prevent damage from electrostatic discharge.
3. Product Overview
The A1706 Logic Board is the main circuit board of your MacBook Pro, integrating the CPU, RAM, and SSD. It also supports Touch ID for fingerprint unlocking.

Figure 1: MacBook Pro A1706 Logic Board (2016/2017 Models)

Figure 2: Top view of the A1706 Logic Board

Figure 3: Touch ID component, supporting fingerprint unlocking
Video 1: Overview of the A1706 Logic Board, showing various angles and components.
4. Setup & Installation Instructions
Replacing a logic board requires technical expertise. If you are not comfortable performing this procedure, seek assistance from a qualified technician.
- Before Installing: Disconnect the battery and the charger from your MacBook Pro. Ensure the device is completely powered off and discharged.
- Installation: Carefully remove the old logic board. Clean your computer's internal components, especially the CPU and GPU heatsink areas. Apply a small amount of high-quality thermal grease to the CPU and GPU on the new logic board before installation. Install the new logic board, ensuring all connectors (display, keyboard, trackpad, etc.) are securely attached.
- Initial Operation: After finishing the installation, connect the battery and the charger. Then, press the power button. The computer should turn on.
- Compatibility Note: Late 2016 and Mid 2017 A1706 Motherboards are compatible with each other.
For detailed disassembly and reassembly steps, it is recommended to consult a service manual specific to your MacBook Pro A1706 model. A user manual in PDF format may also be available for further reference.
5. Operating Instructions
Once the logic board is correctly installed and the computer powers on, your MacBook Pro should function as expected. Operating instructions for macOS and its applications can be found in Apple's official user guides and support documentation.
6. Maintenance
- Storage: When not in use, store the logic board in a dry, anti-static environment, away from direct sunlight and extreme temperatures.
- Cleaning: If necessary, gently clean the logic board with a soft, lint-free cloth and isopropyl alcohol. Avoid using excessive liquid or abrasive materials.
- Handling: Always handle the logic board by its edges to avoid touching sensitive components and connectors.
7. Troubleshooting
- Computer Does Not Turn On: Double-check all internal connections, especially the battery, power button flex cable, and charger. Ensure the battery is charged.
- No Display: Verify that the display cable (LVDS cable) is securely connected to both the logic board and the display assembly.
- System Instability/Overheating: Confirm that thermal paste was applied correctly to the CPU and GPU, and that the heatsink is properly seated and secured. Check for any loose connections.
- Operating System Issues: If the computer boots but macOS does not load or prompts for a password you don't have, you may need to perform a clean installation of macOS. This typically involves booting into macOS Recovery mode.
8. Specifications
| Feature | Specification |
|---|---|
| Product Type | Motherboard / Logic Board |
| Model Number | A1706 |
| Compatible Brand | APPLE |
| Series | MacBook Pro |
| Compatible Model | For MacBook Pro 13-inch A1706 |
| Compatible Years | 2016, 2017 |
| Part Numbers | 820-00239-A (2016), 820-00923-A (2017) |
| CPU Options | Intel Core i5 / i7 (Integrated) |
| RAM Options | 8GB / 16GB (Integrated) |
| SSD Options | 256GB / 512GB / 1TB (Integrated) |
| Memory Type | DDR3 (Integrated) |
| Graphics Card Type | Integrated |
| Conditions | Original Used |
| Tested | Working 100% |
9. User Tips
- Operating System Installation: Be prepared to install macOS from scratch after replacing the logic board. The board may not come with an operating system pre-installed, or it might be locked to a previous user's account. You will need a bootable macOS installer or access to macOS Recovery.
- Anti-Static Precautions: Always use an anti-static wrist strap and work on an anti-static mat when handling sensitive electronic components like a logic board to prevent damage from electrostatic discharge.
- Thermal Paste: Ensure you have fresh thermal paste on hand for the CPU and GPU before installation to ensure proper heat dissipation.
10. Warranty & Support
This logic board comes with a 3-month warranty from the date of purchase. For any warranty claims, technical support, or further inquiries, please contact your seller directly. Ensure you retain your proof of purchase for warranty purposes.