VGR V-889

Contents

VGR Hair Trimmer & Clipper User Manual

Model: V-889 Series

Introduction

Thank you for choosing the VGR V-889 series hair trimmers and clippers. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your device. Please read it thoroughly before first use and keep it for future reference.

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries.

Package Contents

The VGR V-889 series hair cutting kit typically includes the following items:

  • 1 x Hair Clipper
  • 1 x Hair Trimmer
  • 3 x Cutting Guide Combs (for trimmer)
  • 6 x Cutting Guide Combs (for clipper)
  • 1 x USB Charging Cable
  • 1 x Cleaning Brush
  • 1 x Protective Cap
  • 1 x Instruction Manual
VGR Hair Trimmer and Clipper Set with accessories
Image: VGR Hair Trimmer and Clipper Set with charging docks, guide combs, cleaning brush, and USB cable.

Product Overview

The VGR V-889 series offers high-performance hair cutting tools designed for precision and durability.

Key Features:

  • High-Speed Motor: Equipped with a powerful motor operating at 9000 RPM for efficient and swift cutting.
  • Advanced Blades: Hair clipper features ceramic and Metal Injection Molding (MIM) blades. The trimmer uses ceramic and Diamond-Like Carbon (DLC) coated blades for sharpness and durability.
  • LED Display: Provides clear information on battery level and speed settings.
  • Durable Construction: Robust metal body design ensures longevity and a comfortable grip.
  • USB Charging: Convenient USB-C charging for flexibility.
VGR High Speed Hair Clipper with 9000 RPM motor
Image: High-speed hair clipper (Model V-889 S2) highlighting the 9000 RPM motor.
VGR Clipper with Ceramic and Powder Metallurgic Blade
Image: Close-up of the VGR clipper blade, showing ceramic and powder metallurgic construction for fast and smooth cutting at 9000 RPM.
VGR Trimmer LED Display showing battery and RPM
Image: LED display on the VGR trimmer, indicating battery status ('POWER LEFT') and motor speed ('9000 rpm').

Specifications

FeatureSpecification
Product NameHair Clipper / Hair Trimmer
ModelV-889 Series (e.g., V-889C, V-889T, V-889 S2)
Battery2000 mAh / 2500 mAh Lithium battery (model dependent)
Rated Input5V 1A
Power7 W
Charging Time2.5 - 3 hours
Working Time (full charge)240 - 250 minutes
Motor TypeHigh Speed vibratory motor
Range of Speeds8000 / 9000 RPM / min
Blade MaterialStainless steel, Ceramic, MIM, DLC coating
Minimum Cutting LengthLess than 0.5mm (without comb)
Adjustable Cutting Length (without comb)0.8mm to 2mm (5-level unlimited adjustment)
Guide Comb Lengths1.5mm, 3mm, 4.5mm, 6mm, 10mm, 13mm (clipper); 1mm, 2mm, 3mm (trimmer)
Power TypeMains and battery operation
FunctionsWet haircut, dry haircut, washing blades under water, fast charging, charging indication
PurposeFor body, for the head
MaterialMetal housing
Certifications3C, CE, UL, GS, CCC
VGR Hair Clipper Product Specifications Table
Image: Detailed product specifications for the V-889C Hair Clipper.

Setup

Before First Use:

  1. Remove all protective films from the device.

Charging:

  1. Connect the provided USB cable to a certified 5V power adapter (not included).
  2. Plug the other end of the USB cable into the charging port on the device or its charging dock.
  3. The LED display will indicate the charging status. A full charge typically takes 2.5 to 3 hours.
VGR USB-C Charging and Battery Information
Image: Illustration of USB-C charging, showing compatibility with computer, laptop, USB charging adapter, and power bank. Also displays charging time (2.5/3 hours), working time (240/250 minutes), and lithium battery capacity (2000/2500 mAh).
VGR Trimmer USB Charging with Dock
Image: VGR trimmer in its charging dock, connected via USB cable, showing 2.5 hours charging for 240 minutes working time with a 2000 mAh lithium battery.

Operation

Turning On/Off and Mode Selection:

  1. To Turn On: Press and hold the power button for 3 seconds.
  2. To Change Modes/Speed: Short press the power button while the device is on.
  3. To Turn Off: Press and hold the power button for 3 seconds.

Adjusting Cutting Length:

The VGR V-889 series offers multiple ways to adjust cutting length:

  • Without Guide Comb: The built-in taper lever allows for 5-level unlimited adjustment, providing cutting lengths from 0.8mm to 2mm.
  • With Guide Combs: Attach the desired guide comb to achieve specific cutting lengths. The clipper typically includes 6 combs (1.5mm, 3mm, 4.5mm, 6mm, 10mm, 13mm), and the trimmer includes 3 combs (1mm, 2mm, 3mm).
VGR Clipper Guide Combs with Lengths
Image: VGR clipper showing various guide combs and their corresponding cutting lengths (1.5mm, 3mm, 4.5mm, 6mm, 10mm, 13mm).
VGR Clipper 5-Level Unlimited Cutting Guides
Image: Diagram illustrating the 5-level unlimited cutting guide adjustment on the VGR clipper, ranging from 0.8mm to 2mm without a guide comb.

Maintenance

Cleaning:

  • After each use, turn off the device and remove any attached guide combs.
  • Use the provided cleaning brush to remove hair clippings from the blades and housing.
  • The blades can be washed under water for thorough cleaning. Ensure the device is turned off and disconnected from power before washing.
  • Dry the blades completely before reassembling or storing the device.

Blade Care:

  • Due to airline regulations, lubricants are not included with the product. It is recommended to periodically oil the blades with a suitable clipper oil (not included) to maintain optimal performance and extend blade life.

Storage:

  • After use, turn off the device and store it in a dry place, away from children.
  • Use the protective cap to cover the blades when not in use.

Troubleshooting

If you encounter any issues with your VGR hair trimmer or clipper, please refer to the following common solutions:

  • Device not turning on: Ensure the device is fully charged. Connect it to the USB charging cable and a power source for at least 30 minutes before attempting to turn it on again.
  • Poor cutting performance: Clean the blades thoroughly to remove any trapped hair. Ensure the blades are properly oiled. Check if the guide comb is securely attached.
  • Unusual noise or vibration: Turn off the device immediately. Check for any foreign objects caught in the blades or motor area. If the issue persists, contact customer support.
  • Battery not holding charge: Ensure you are using a certified 5V power adapter. If the battery life has significantly decreased over time, it may indicate battery degradation.

User Tips

  • The device operates with a voltage lower than 20V, making it a compact charger suitable for use worldwide. This makes it convenient for travel.
  • For best results, always ensure the blades are clean and lightly oiled before each use.
  • When cutting hair, start with a longer guide comb and gradually reduce the length to avoid cutting too short.

Warranty & Support

All VGR products come with a 12-month warranty from the date of purchase.

If the item is damaged during shipping or if you experience any issues, please contact the seller or VGR customer support directly. Ensure the item remains in its original condition when reporting damage. They will review your situation and provide a solution accordingly.

Additional Resources

For a more detailed guide, you can view the official user manual in PDF format:

View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.