1. Important Safety Information
General Safety Notices
Read all instructions thoroughly before installation and operation. It is highly recommended that this unit be installed by a certified car audio professional.
- This machine is designed for 12V vehicle power supply systems only. Ensure the ground wire is properly grounded. Do not install this unit in a 24V vehicle, as it will cause damage.
- Do not attempt to repair the power fuse without professional guidance. Improper fuse use can damage the unit and pose a fire hazard.
- For safety, drivers must not watch videos or operate the machine in a way that distracts from driving.
- Avoid placing this product in humid environments or near water to prevent electric shock or other damage.
Installation Warnings
To prevent damage or malfunction:
- Carefully check speaker lines before installation. Grounding or touching speaker wires incorrectly can damage the unit.
- Ensure positive and negative terminals of the power supply do not touch or short circuit.
- Speaker wires must not touch each other or the power supply wires.
Reading the Manual
Keep this manual for future reference. Clean the unit only with a dry cloth. Follow all instructions and do not defeat any safety features.
Note: To prevent burning the machine, do not turn on the power until the power cord is properly connected!
2. Product Overview & Specifications
Key Features
- HD Touch Screen Display
- Built-in Bluetooth (BT) for hands-free calling and audio streaming
- FM Radio Tuner
- USB 2.0 Port for media playback and phone charging
- Supports Audio Playback Formats: MP3/WMA/WAV/FLAC/OGG/APE
- Supports Video Playback Formats: RM/RMVB/DVD(VOB)/VCD(DAT)/MP1/MP2/DIVX/XV1D/MP4/H263/H264/FLV/3GP/SWF/AVI/ASF/MJPEG
- Remote Control included
- Power-off with auto-memory store function (radio or USB mode)
- Clock Function, Mute Function
- Bass & Treble, L&R channel stabilizer
- Rear view camera function support
- Video input Function
- Phone link (MirrorLink, CarPlay, Android Auto)
Technical Specifications
| Out Power | 45W*4 |
| Item Weight | 0.78 kg |
| Item Size | 7 inch |
| Resolution | 1024*800 |
| Voltage | 12 V |
| Display Size | 7" |
| FM Range | 87.5 MHZ - 108.00 MHz (Europe) |
| Certification | CE |
Product Dimensions
Refer to the diagram below for detailed product measurements.

Description: The diagram shows the dimensions of the car stereo unit. Front view: 180mm (7.08inch) width, 105mm (4.14inch) height, and 60mm (2.36inch) depth for the screen bezel. Side view: 180mm (7.08inch) total length, 82mm (3.23inch) depth for the main body, 50mm (1.97inch) height for the main body, and 52mm height for the rear connectors.
3. Installation Guide
Pre-Installation Test
Perform these tests before full installation to ensure the unit is functioning correctly.
Test Car Stereo
- Combine the red and yellow wires of the car stereo and connect them to the positive pole of the vehicle battery (+12V).
- Connect the black wire to the negative pole of the vehicle battery (GND).
- After 2 seconds, check if the car stereo screen lights up. If it does, the unit is functioning properly.
Test Rear View Camera (if applicable)
- Maintain the car stereo test connections.
- Connect the pink wire from the car stereo to the top red wire of the rear view camera.
- Combine the middle red wire and bottom red wire of the rear view camera and connect them to the positive pole of the battery (+12V).
- Connect the black wire of the rear view camera to the negative pole of the battery (GND).
- If the camera lights up and the car stereo displays the reverse image, the rear view camera is functioning correctly.
Wiring Connections
Refer to the following diagrams for detailed wiring instructions. The specific wiring may vary slightly, always refer to the actual product and its included wiring harness.
Wiring Diagram Reference - Example 1

Description: This diagram illustrates the wiring connections for the car stereo. Key connections include:
- Power: Red (ACC Ignition Switch +12V), Black (GND Ground wire B-), Yellow (B+ Power Supply +12V).
- Antenna: Blue (ANT Auto Antenna Power).
- Illumination: Green (ILL Headlight control line).
- Steering Wheel Controls: Brown (KEY1).
- Parking: Orange (Parking single check), Pink (Parking Sensor Control Wires).
- Speakers: Green/Green-Black (Rear Left Speaker +/-), White/White-Black (Front Left Speaker +/-), Gray/Gray-Black (Front Right Speaker +/-), Purple/Purple-Black (Rear Right Speaker +/-).
- Inputs/Outputs: External display, External video source, Rear view camera, FM radio antenna, USB DVR (optional), Microphone input.
Wiring Diagram Reference - Example 2

Description: This diagram provides an alternative wiring configuration. Key connections include:
- Power: Red (+12V Ignition switch), Yellow (+12V Constant Power Supply B+), Black (Ground Wire B-).
- Steering Wheel Controls: Orange/Black (Steering Wheel Control 2), Orange/Black (Steering Wheel Control 1).
- Rear Camera: Pink (Reversing Camera Wires).
- Illumination: Orange (ILL Illuminate Backlight).
- Brake Detect: Brown.
- Auto Antenna: Blue.
- Speakers: Green/Green-Black (Rear Left Speaker +/-), White/White-Black (Front Left Speaker +/-), Gray/Gray-Black (Front Right Speaker +/-), Purple/Purple-Black (Rear Right Speaker +/-).
- Inputs/Outputs: External display, Rear view camera, Left speaker, FM radio, Microphone, USB DVR (optional), Right speaker, External video source.
Mounting the Unit
The car stereo is universal in size and suitable for most cars. If the unit does not fit your car directly, you may need aftermarket accessories (double DIN dash kit, wire harness, antenna adapter) or modifications to your car's original frame.
Here are common installation methods:

Description: The image illustrates three common installation methods for the car stereo:
- 1. Screw Fixed Installation: The unit is secured into the dash opening using screws through mounting brackets.
- 2. Card Position Fixed Installation: The unit slides into a mounting cage or frame that is then secured in the dash.
- 3. Special Frame Fixed Installation: The unit is installed within a custom fascia or trim panel designed for specific vehicle models.
4. Basic Operation
Front Panel Controls & Icons
The front panel features various buttons and a rotary knob for control. Due to different versions, icon functions may vary slightly.
Video and Music Function Buttons
| 🏠 | HOME button | ⏭️ | The next song |
| 🔀 | Random pattern | 🔁 | Single/list loop |
| ⏮️ | Fast backward function | EQ | Sound shortcut key |
| ⏸️ | Pause/Play | ↩️ | Return key |
Machine Host Controls
| 1 | ⏮️ | Last song |
| 2 | ⏻/M | Long press to turn on/off. Short press to enter Switch mode. |
| 3 | ⏭️ | Next Song |
| 4 | ⊞+ | VOL+ |
| 5 | ⊟- | VOL- |
| 6 | MIC | Built-in microphone hole |
| 7 | RES | Reset (press with a sharp object) |
| 8 | AUX | External audio input jack |
| 9 | ▲ | Screen pop-up/screen stow (electrically retractable) |
| 10 | ◪ | Screen angle adjustment (electrically retractable) |
| 11 | 🏠 | Return to the main interface |
| 12 | ↩️ | Return to the previous interface |
5. Advanced Features
Radio Tuner Operation
From the main menu, select the "FM/Radio icon" to enter radio mode.
- Band Selection: Press "FM" to cycle through FM1/2/3 bands.
- Browse/Auto Memory: Press "AS/PS" to browse and save stations. The unit will scan for 10 seconds per station. Hold "AS/PS" for 3 seconds to automatically store strong signal stations.
- Manual Search: Use the ◀ or ▶ buttons to manually adjust frequency.
- Auto Search: Hold ◀ or ▶ to automatically search for the next station.
USB/TF Media Playback
Insert a USB flash drive or TF card into the designated slot to play videos and music. The USB interface also supports charging for mobile phones.
Audio/Video Input
Click the application icon to enter the interface for audio and video playback. Select files to play. Supported formats include AVI, MKV, QT, MPG, ASF, FLV, RMVB, MP3, WMA, ACC, WAVE, FLAC, APE, OGG, MP4 for audio/video, and BMP/GIF/JPG/PNG for images.
Bluetooth (BT) Connectivity
- Enter BT Settings: Click the settings icon, then the BT icon.
- Pairing: Search for the device name (e.g., "CAR***") on your phone. Confirm the matching code (PIN: 0000, 1234, or 88888888).
- Call Function: Use the dial pad on the screen to input numbers. Press the green phone icon to dial, red to end.
- Telephone Directory: Enter the phone book interface and click "Sync Contact" to import contacts. Search contacts by entering English letters.
- BT Music Playback: Connect a BT phone to stream music. Control playback (play/pause/skip) from the unit.
Steering Wheel Control Learning
- Press any button on your steering wheel. The interface will prompt you to long-press the steering wheel button.
- On the screen, select the desired function to learn.
- Press the corresponding function button on your steering wheel. Repeat for all desired controls.
- This function requires an original steering wheel (non-bus control) with voltage input control.
MirrorLink (Android & iPhone)
From the menu, select the "Mirrorlink Icon" to enter Phone link.
- Ensure your phone's display mode is set to "landscape" for full-screen display on the car stereo.
- Bluetooth must be connected to synchronize audio.
- If the phone screen turns off, the car stereo display will also turn off.
For Android Mirror Link
Connect via USB data cable. You may be prompted to install an APP. After installation, reconnect the cable to enter screen mirroring mode. You can operate from both the player and phone screens. Audio requires Bluetooth connection.
For iPhone Mirror Link
Connect via USB data cable and confirm authorization. Note: Some high-configuration iPhones may not be compatible. Wireless mirror link is also supported on some models; search for the device wirelessly.
Apple CarPlay (Wired & Wireless)
- Wired Connection: Connect your iPhone via USB data cable. CarPlay will automatically launch.
- Wireless Connection: Turn on Bluetooth and Wi-Fi on your iPhone, then connect via Bluetooth. CarPlay will automatically launch. The signal is transmitted via Wi-Fi.
Android Auto (Wired & Wireless)
This feature may require Google Play services and may not be supported in all regions.
- Requirements: Download and install "Android Auto" app from Google Play. Android 6.0 or higher is required. Use a valid data cable.
- Wired Connection: Connect your Android phone via USB data cable. Android Auto will automatically launch.
- Wireless Connection: Turn on Bluetooth and Wi-Fi on your Android phone, then connect via Bluetooth. Android Auto will automatically launch. The signal is transmitted via Wi-Fi.
Rear View Camera System
The reversing video input connects via an RCA adapter cable. When a signal is detected, the LCD automatically switches to the camera image (camera purchased separately).
- Refer to the "Rear View Camera Wiring" section for connection details.
- If no camera is installed, it will display "No Signal".
- Trigger the rear view display by selecting the "Rearview Cam" icon or by engaging reverse gear.
Safety Warning: Do not turn on the rearview camera while driving normally to avoid distraction.
6. Maintenance
Cleaning Instructions
To clean the unit, gently wipe the screen and body with a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray directly onto the unit.
7. Troubleshooting
This guide helps resolve common issues. If problems persist, contact customer support.
| Problem | Cause and Resolve |
|---|---|
| Power off | Check/replace power fuse. Reconnect DC wires if loose. |
| Fail in keying | Program disorder. Press reset button or restart unit. |
| Fail in getting stations | Antenna not inserted/connected correctly. Insert or connect antenna. |
| Poor radio reception | Antenna length/condition (broken, too short). Weak radio signal. Antenna not grounded correctly. |
| "STEREO" flashing | Radio frequency not tuned accurately. Radio signal too weak (press ST button to turn off stereo). |
| Noise, image jumping, no color | Disc damaged/blurry. Color system setup incorrect (set to PAL or NTSC). |
| Remote unavailable | Remote control battery low/dead. Remote control window unable to receive signal (aim at receiver). |
| USB no reading | Connection incorrect. Card unsupported. USB flash disk/SD/TF card capacity (max 32GB). |
| No sound / Sound cuts out | Speaker negative wires improperly grounded. Amplifier IC burned out. Speaker cables short-circuited or not insulated. |
| Bluetooth not working / disconnects | Forget device on phone, re-pair. Reset unit (use reset hole or unhook power). |
| Microphone not working | Check BT volume settings. Dashboard too low (mic too far). |
| Reversing camera not working | Pink cable not wired correctly with camera's controlling cable. |
| Cannot save time/radio settings | Yellow cable not wired to car's battery 12V+ (constant positive). |
| Car radio noise | Interference, especially with amplifiers. Ensure all cables are well-wrapped. |
| Screen Mirroring Failure | Device compatibility. Enable car's Wi-Fi/BT, activate phone's screen mirroring, select "CAR-MP5". Restart both devices. |
8. User Tips
- Audio Volume: If music is too quiet even at max volume, check the audio settings, equalizer, and the volume level of the source device (e.g., phone connected via Bluetooth).
- CarPlay Setup: For CarPlay, ensure your iPhone is connected via USB or wirelessly as described in the "Apple CarPlay" section. Follow on-screen prompts for initial setup.
- Included Cables: The unit typically comes with the necessary wiring harness for connection. Refer to the wiring diagrams for specific cable identification.
- Vehicle Compatibility: While universal, always check the dimensions and wiring requirements against your specific vehicle model before installation.
9. Support & Further Information
Customer Service
Thank you for choosing our product. If you have any further questions, require assistance, or encounter issues not covered in this manual, please contact our customer service staff for support.
Product UI or functions may be modified and upgraded over time without notice. Any discrepancies in the manual are normal.
PDF Manual Reference
A detailed user manual in PDF format is available for download, which may contain additional diagrams and information: View User Manual (PDF)