1. Product Overview
The COOSPO BK805 is a versatile bicycle speed and cadence dual sensor designed to provide accurate real-time cycling data. It utilizes both Bluetooth 5.0 and ANT+ wireless technologies, allowing seamless connection to various GPS bike computers, smartphones, and sports watches. Its waterproof design ensures reliable performance in diverse weather conditions.

Image: COOSPO BK805 Bicycle Speed and Cadence Dual Sensor.
2. Standard Accessories
The package includes the following items:
- Main Device x 1 (CR2032 battery installed)
- Crank Magnet x 1
- Spoke Magnet x 1
- Rubber Band for Main Device x 1
- Rubber Pad for Main Device x 1
- Battery Cover Tool x 1
- Cable Ties x 6
- Screw Wrench x 1
- User Manual x 1

Image: Standard accessories included with the BK805 sensor.
3. Setup and Installation
3.1 Accessories Installation Diagram
The main device detects both cycling cadence and speed. The crank magnet assists in cadence detection, and the spoke magnet assists in speed detection. The main device transfers real-time data to your smart device via Bluetooth and ANT+.

Image: Overview of sensor and magnet placement on a bicycle.
3.2 Remove the Insulating Sheet
Before first use, the battery insulating sheet must be removed.
- Rotate the battery cover to the OPEN position using the provided battery cover tool, then carefully remove the battery cover.
- Remove the battery insulating sheet. Install the battery cover back by aligning it to the OPEN position and rotating it to the CLOSED position.

Image: Step 1 - Opening the battery cover.

Image: Step 2 - Removing the insulating sheet and closing the cover.
3.3 Accessories Installation
- Install the crank magnet on the crank arm and secure it with two cable ties. (Do not fully tighten the ties until the final position is determined.)
- Install the rubber pad onto the main sensor.
- Align the sensing position of the cadence sensor with the crank magnet. Install the main sensor as shown in the picture and fix it with cable ties.
- Attach the spoke magnet to a bicycle spoke. Align it with the sensing position of the speed sensor and tighten it.
- Check that the crank magnet and spoke magnet are aligned with the sensing positions of the sensor. The distance between them should be less than 12mm. Fix the tail of the sensor with the screw wrench. (Notice: When rotating the tail, do not force it beyond its rotation range to avoid damage.)
- Check if the installation is successful. Turn the crank and the back wheel of the bicycle. The speed LED should flash blue, and the cadence LED should flash green. After confirming successful installation, tighten the cable ties, cut off excess parts, and secure all accessories with the rubber band.

Image: Installation of the crank magnet.

Image: Attaching the rubber pad to the main sensor.

Image: Aligning the cadence sensor with the crank magnet.

Image: Attaching the spoke magnet.

Image: Checking sensor-magnet alignment and distance.

Image: Final installation check and securing accessories.
4. Operating Instructions
4.1 Testing Mode & LED Light
The BK805 features a testing mode to verify correct installation of the magnets and sensor. To enter testing mode, reinstall the battery (refer to Section 5.1 Battery Replacement).
It is recommended to run testing mode every time you install the BK805.
- If the speed sensor (spoke magnet) is installed correctly and the wheel rotates, the LED light will flash blue.
- If the cadence sensor (crank magnet) is installed correctly and the crank is turned, the LED light will flash green.
The testing mode will last for 15 minutes after the battery is installed.

Image: LED light indicator and magnet sensing positions.
4.2 Connectivity and Compatibility
The BK805 sensor supports both Bluetooth 5.0 and ANT+ protocols, allowing simultaneous connection to multiple devices. For example, you can connect to a smartphone via Bluetooth and a sports watch or bike computer via ANT+ at the same time.
Applicable Smart Phones:
- iOS 9.0 or above (iPhone 4s model or above)
- Android 4.3 or above with Bluetooth 5.0
Compatible Apps:
The BK805 works with most popular cycling applications that display speed and cadence data, including:
- CoospoRide
- Wahoo Fitness
- Zwift
- Openrider
- TrainerRoad
- RidewithGPS
- Rouvy
- Peloton
(Note: Please refer to your app's instructions for specific connection procedures.)

Image: Third-party app compatibility for cycling data.
5. Maintenance
5.1 Battery Replacement
If the device cannot be detected or functions improperly, consider replacing the battery.
- Rotate the battery cover to the OPEN direction to remove it.
- Remove the old battery. Properly dispose of used batteries according to local regulations.
- Install a new CR2032 battery, paying attention to the positive and negative poles. Use the battery cover tool to rotate the battery cover in the opposite direction of OPEN to secure it.

Image: Battery replacement procedure.
Battery Safety Statement:
- INGESTION HAZARD: This product contains a button cell or coin battery. DEATH or serious injury can occur if ingested. A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
- KEEP new and used batteries OUT OF REACH of CHILDREN.
- Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
- Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. DO NOT dispose of batteries in household trash or incinerate.
- Even used batteries may cause severe injury or death. Call a local poison control center for treatment information.
- Compatible battery type: CR2032. Nominal battery voltage: 3V.
- Do not force discharge, recharge, disassemble, heat above 45°C or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.
- Ensure the batteries are installed correctly according to polarity (+ and -).
- Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries.
- Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.
- Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.
5.2 General Product Care
- Do not open or modify the product.
- Do not disassemble or attempt to service this product.
- This product is safe under normal and reasonably foreseeable operating conditions.
- Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.
6. Troubleshooting
- If there is cadence or speed data missing, please check the position of the magnet and sensor installed. Adjust them until the data is normal. Ensure the distance between the sensor and magnets is less than 12mm.
- The Bluetooth 5.0 and ANT+ protocols of the bicycle speed/cadence sensor can work at the same time. If you want to connect to a smartphone and sports watch separately, ensure that the device you are connecting has Bluetooth 5.0 and ANT+.
- The device is compatible with a variety of popular fitness Apps. For specific connection instructions, please refer to the instructions within the respective App.
- If the product is operating improperly, contact COOSPO support. Product must be returned to the manufacturer for any service or repair.
7. User Tips
- Careful Setup: While setup is generally straightforward, take your time to ensure proper alignment of the sensor and magnets. This is crucial for accurate data.
- Magnet-Sensor Distance: Always verify that the distance between the sensor and both the crank and spoke magnets is less than 12mm for reliable detection.
- Versatile Use: The sensor can be adapted for use on stationary bikes or even elliptical trainers. For non-standard installations, you may need to adjust or remove protrusions for optimal fit and ensure correct wheel circumference settings in your app.
- Battery Check: Pay attention to the CR2032 battery. If you experience connectivity issues, a fresh battery is often the solution.
- Coospo Compatibility: The BK805 works seamlessly with Coospo speedometers and other Coospo devices.
8. Specifications
| Feature | Specification | Feature | Specification |
|---|---|---|---|
| Weight | 19.2 g | Battery Life | 500 hours |
| Wireless | Bluetooth 5.0 & ANT+ | Battery Type | CR2032 |
| Distance | Bluetooth 5.0: 25 m ANT+: 10 m | Waterproof | IP67 |
| Size | 102.4 x 44.7 x 22.1 mm | LED Light | Red, Blue, Green |
9. Frequently Asked Questions (FAQ)
- Q: Is the BK805 compatible with Black Bird cycling computers?
- A: The manual states compatibility with apps like Wahoo Fitness, Zwift, Openrider, TrainerRoad, RidewithGPS, Rouvy, Peloton, and other apps with speed and cadence display. For specific compatibility with 'Black Bird', please refer to the Black Bird device's specifications or contact their support.
- Q: Will this be compatible with the Bontrager Ridetime Elite cycling computer?
- A: The BK805 supports both Bluetooth 5.0 and ANT+ protocols. If the Bontrager Ridetime Elite cycling computer supports either of these standards for speed and cadence sensors, it should be compatible. Please check your Bontrager device's specifications.
- Q: What is the thickness of the sensor mounted to the bicycle crank?
- A: The overall dimensions of the main device are 102.4 x 44.7 x 22.1 mm. The thickness of the crank magnet itself is not specified, but the installation requires the sensor to be within 12mm of the magnet.
10. Disclaimer
- The information contained in this manual is for reference only. The product described above may be subject to alteration due to the manufacturer's continuing research and development plans, without prior announcement.
- We shall not bear any legal responsibility for any direct or indirect, accidental, and special damages, losses, and expenses arising from or in connection with the use of this manual and the product described herein.
11. FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
12. Additional Resources
For a downloadable PDF version of the user manual, please refer to the official documentation available at: COOSPO BK805 User Manual (PDF)