Product Overview
The DSPIAE ES-A Reciprocating Sander is an electric grinding pen engineered for model enthusiasts and DIY crafters. It features a speedy yet smooth reciprocating action, quick-release sanding heads, and multiple speed settings to deliver precise and efficient sanding results. The device is designed for ease of use, with a one-touch start-up and clear indicators for power level and gear.

Setup
Sanding Head Selection and Installation
- Choose a suitable sanding head: The kit includes various shapes such as rectangular, right angle, triangular, slim, arc, spherical, and sledge sanding heads to accommodate different contours and details.
- Select proper sanding paper grit: Sandpapers are available in various grits (e.g., 180#, 280#, 400#, 600#, 800#, 1000#) for different stages of sanding. Peel off a pre-cut self-adhesive sandpaper and securely stick it onto the chosen sanding head.
- Fit sanding head onto the sander: Ensure the head is fully inserted into the reciprocating sander for secure operation. The quick-release design allows for fast and easy installation and replacement.


Operating Instructions
Power On/Off and Speed Adjustment
The sander features a one-touch start-up for easy operation and three gear adjustments for speed control.
- To Power On: While the sander is off, click the function key once. The sander will start at the first gear sanding speed (2800 cyc./min).
- To Adjust Speed: Within 3 seconds of starting or changing gear, click the function key again to switch to the second gear (3100 cyc./min). Click again within 3 seconds to reach the third gear (3600 cyc./min).
- To Power Off: If the sander has been running in its current gear for more than three seconds, a single click on the function key will turn the sander off.

Lighting Control
The sander includes customized lighting effects for each gear, providing a direct display for real-time RPM.
- Turning Lights On/Off (Power Off State): The default setting for the lighting system is 'off' when the sander is powered off. Double-click the function key to turn it on.
- Turning Lights On/Off (Operating State): The default setting for the lighting system is 'on' when the sander is operating in 1st, 2nd, or 3rd gear. Double-click the function key to turn it off.
Lighting Effect Setup
You can define your own lighting effect for 'power off', '1st gear', '2nd gear', and '3rd gear' conditions.
- While the lighting is on (in any gear), press and hold the function key until the white light blinks twice. This indicates you have entered the lighting setup mode.
- Single-click the function key to cycle through the ten available lighting modes.
- To save the current mode, press and hold the function key again, or simply wait for 6 seconds without any further action. The white light will blink twice, confirming the setting has been saved and you have exited the setup mode.
- Note that the lighting setting is only effective for the specific gear you were using when you set up the effect.

Application Scenarios
The reciprocating sander is ideal for various detailed sanding tasks on model parts.

Maintenance
Charging Instructions
The sander features quick charging capabilities, taking approximately 20 minutes for a full charge, providing up to 100 minutes of duration time with empty loading.
- When the charging cord is connected, the sander will automatically stop working, and the function key will temporarily be unresponsive.
- During charging, the lights will illuminate in a pulse mode. As the battery charges, the light color will transition from red to green.
- Once charging is complete, the green light will remain constantly lit.
- After disconnecting the charging cord, the electric grinding pen will resume its previous working state.

Battery Care and Storage
- If you plan to store the sander for a long period, ensure it is properly charged every six months to prevent damage to the Lithium battery due to over-discharge.
Troubleshooting
Overload Protection
- The sander is equipped with an intelligent IC chip for overload protection. If excessive pressure is detected on the sanding head, the sander will automatically shut off to protect the motor and prolong its service life.
- Avoid applying brutal force on the working sanding head, as the motor is likely to stall when overloaded.
Specifications

| Attribute | Value |
|---|---|
| Product Name | "Illusive Shadows" Reciprocating Sander |
| Model | ES-A |
| Speed | 2800/3100/3600 cyc./min |
| Dimensions | 178(L)*21(W)*18(H)mm |
| Net Weight | 54.5 ± 1g |
| Shell Material | ABS (outer shell) |
| Sanding Head Material | Nylon (sanding heads), POM (pinions) |
| Reciprocating Travel Distance | 2.5 ± 0.1mm |
| Reciprocating Horizontal Deviation | ±0.1mm |
| Oscillating Deviation (Left/Right) | ±0.1mm |
| Battery Capacity | 280mAh |
| Input Voltage | 5V |
| Input Current | 1A |
| Output Voltage | 3.7V |
| Output Current (with load) | 750mA max |
| Output Current (without load) | 250mA max |
| Rated Power | 2.8W |
| Charging Time | 20 ± min |
| Work Duration (without load) | 100 ± min |
| Max. Pressure (1st Gear) | 320g |
| Max. Pressure (2nd Gear) | 360g |
| Max. Pressure (3rd Gear) | 430g |
Note: Data may slightly vary with fluctuation of voltage and current.
Safety Precautions
- Do not use this sander when the ambient temperature is above 40°C.
- Keep out of reach of children under 14 years of age to avoid injury.
- Avoid tapping or dropping this product, which may cause damage or malfunction.
- Do not cover or block this sander while it is under working condition to ensure proper heat dissipation.
- This sander is designed for use with compact parts for precision sanding/polishing. Do not use it on large objects.
Warranty and Support
For detailed warranty information and customer support, please refer to the official product documentation or contact the seller directly. A user manual in PDF format is available for download:
User manual (PDF): View User Manual PDF