QCY Crossky C30

Contents

QCY Crossky C30 Earclip Wireless Earphones User Manual

Model: Crossky C30 | Brand: QCY

1. Introduction

Thank you for choosing the QCY Crossky C30 Earclip Wireless Earphones. This manual provides detailed instructions on how to set up, operate, and maintain your earphones to ensure the best possible audio experience. Please read this manual carefully before use and keep it for future reference.

2. Package Contents

Please check the box for the following items:

  • QCY Crossky C30 Earclip Wireless Earphones
  • Charging Case
  • USB Type-C Charging Cable
  • User Manual (this document)

3. Product Overview

Familiarize yourself with the components and controls of your QCY Crossky C30 earphones.

Earbud Components

Diagram showing the components of the QCY Crossky C30 earbud, including indicator light, touch panel, sound hole, and charging contacts.
Diagram of QCY Crossky C30 Earbud Components: Indicator light, touch panel, sound hole, charging contacts.

Charging Case Components

Diagram showing the QCY Crossky C30 charging case with earbuds, highlighting the Type-C charging port and internal layout.
Diagram of QCY Crossky C30 Charging Case: Earbuds, charging contacts, Type-C charging port.

4. Setup

First-time Connection

  1. Remove both earbuds from the charging case. Peel off the isolation films from the charging contacts on both earbuds. Place them back into the charging case to activate them.
  2. Take both earbuds out of the charging case again.
  3. On your phone, search for "QCY Crossky C30" in the Bluetooth device list and tap to connect.
Image showing QCY Crossky C30 earbuds in their charging case with a hand removing the protective film from the earbud contacts.
Remove the protective film from the earbud contacts before first use.

Factory Reset

Use this method if you encounter connection issues.

  1. Ensure the earbuds are not connected to any device.
  2. Take the earbuds out of the charging case.
  3. Within 30 seconds of taking them out, tap the touch panel of each earbud 5 times. The white indicator light on the earbuds will flash 5 times, then stop, indicating a successful reset.
  4. After resetting, use the "First-time Connection" method to pair them again.

Multi-Device Connection

The QCY Crossky C30 supports connecting to two devices simultaneously.

  1. With the earbuds powered on and in pairing mode, connect them to Device A. Then, turn off Bluetooth on Device A. The earbuds will re-enter pairing mode.
  2. On Device B, search for "QCY Crossky C30" and tap to connect.
  3. On Device A, turn on Bluetooth and tap "QCY Crossky C30" to connect. The earbuds are now connected to both devices.
Diagram illustrating how to connect QCY Crossky C30 to two devices (Device A and Device B) simultaneously.
Multi-device connection diagram.

5. Wearing Instructions

For optimal comfort and sound quality, follow these steps to wear your earphones correctly:

  1. Gently hook the earbud over your earlobe, then slide it downwards to the middle-lower position of your ear. Adjust the position until it feels comfortable and secure.
  2. Adjust the angle of the earbud so that the sound hole is vertically aligned with your ear canal. This ensures the best listening experience.
  3. Incorrect wearing may affect call quality and listening experience.
Diagram showing the correct and incorrect ways to wear the QCY Crossky C30 earclip earphones.
Correct wearing position for QCY Crossky C30 earphones.
A man wearing a QCY Crossky C30 earbud, demonstrating comfortable and stable wear.
The C-shaped open-ear design ensures comfortable and stable wear.

6. Operating Instructions

Basic Controls

  • Power On: Open the charging case lid and take out the earbuds. Alternatively, long-press the touch panel for 1.5 seconds (when earbuds are outside the case).
  • Power Off: Place the earbuds back into the charging case.
  • Answer/End Call: Double-tap the touch panel on either earbud.
  • Reject Call: Long-press the touch panel for 1.5 seconds.
  • Play/Pause: Double-tap the touch panel on either earbud.
  • Skip Track Forward: Triple-tap the right earbud.
  • Voice Assistant: Triple-tap the left earbud.
  • Customizable Functions: Other functions like skipping track backward, gaming mode, and spatial sound can be set in the QCY APP.

Charging Earbuds

When the earbuds are charging, the red indicator light will be solid. The light will turn off once fully charged.

Charging Case

When the charging case is charging, the white indicator light will blink. The light will turn solid white once fully charged.

Image showing QCY Crossky C30 earbuds and charging case, highlighting the 25 hours battery life with the charging case.
The QCY Crossky C30 offers up to 5.5 hours of single charge battery life and 25 hours with the charging case.

7. Specifications

FeatureSpecification
Brand NameQCY
ModelCrossky C30
MaterialMetal, ABS
Battery Capacity400mAh (Charging Case)
Battery Life (Earbuds)Up to 5.5 hours (single charge)
Battery Life (with Case)Up to 25 hours
Voice Assistant Built-inYes
Maximum Wireless Range10m-20m
NFC TechnologyNo
Sound IsolatingYes
Earcups TypeOpen-back
Charging MethodCharging case
Driver Diameter10.8mm (dual-magnet driver)
Bluetooth Version5.4
FeaturesWaterproof (IPX4), Dual Connection
Codecssbc
With MicrophoneYes
WirelessYes
Support APPYes (QCY APP)
Active Noise-CancellationNo
Volume ControlYes
Control ButtonNo (Touch Control)
Vocalism PrincipleDynamic
Wireless TypeBluetooth
ConnectorsType-C
CommunicationWireless
StyleEarclip Wireless Earphones
CertificationCE, RoHS, BQB
OriginMainland China
Detailed diagram of the 10.8mm dual-magnet driver unit inside the QCY Crossky C30 earbud.
The 10.8mm dual-magnet high-sensitivity driver delivers vibrant and clear audio.
Image showing a woman wearing QCY Crossky C30 earphones with a frequency response curve graph, illustrating the Bass Enhance Algorithm.
The dynamic EQ algorithm enhances bass performance and reduces high-frequency distortion.
Image showing QCY Crossky C30 earphones connected to both a smartphone and a laptop, demonstrating Bluetooth 5.4 and multipoint connection.
Multipoint Connection & Bluetooth 5.4 allows seamless switching between two devices.

8. User Tips

  • Secure Fit: The earclip design provides a secure fit, making them suitable for activities where other earbuds might fall out.
  • Comfort: Users find the earphones comfortable, lightweight, and not too tight, even for extended wear.
  • Sound Quality: The audio quality is generally considered very good for the price point.
  • Open-Back Design Awareness: Due to the open-back design, sound leakage may occur at maximum volume. To maintain privacy, especially in quiet environments, consider keeping the volume at about half.
  • Noise Reduction: These earphones do not feature active noise cancellation. Any perceived noise reduction is primarily due to increased volume.

9. Troubleshooting (FAQ)

Q1: Only one earbud has sound. How to fix it?

A: For Android phones, check the Bluetooth settings for the earbud. There might be a settings icon next to the device name; click it and ensure both "Phone audio" and "Media audio" are enabled. If the issue persists, try unpairing and re-pairing the earbuds. If still only one earbud has sound, place both earbuds back into the charging case, close the lid, then take them out again to see if both have sound. If not, perform a factory reset.

Q2: My phone cannot find the earbuds. How to fix it?

A: Delete the pairing record on your phone, then search for and pair the earbuds again. If your phone still cannot find the earbuds, try putting the earbuds back into pairing mode or performing a factory reset. If your phone's Bluetooth is malfunctioning, try turning Bluetooth off and on, or restarting your phone.

Q3: No sound during music playback or calls. How to fix it?

A: If there is no sound, ensure the earbuds are properly connected and the volume is turned up. Check your phone's audio output settings to ensure the sound is directed to the earbuds.

Q4: Why is there audio lag/disconnection during video/gaming?

A: Audio lag or disconnections can be affected by factors such as the usage environment, network conditions, and phone codecs. Strong interference from Wi-Fi, 5G/4G signals, or high-power electrical appliances in the vicinity can also cause stuttering or disconnections. Try moving to a different environment or re-pairing the earbuds.

10. Maintenance

  • Cleaning: Do not use oil or other volatile liquids to clean the product. Use a soft, dry cloth.
  • Storage: If the product is not used for an extended period (more than 2 weeks), please recharge it to maintain battery health.
  • Temperature: Do not expose the product to extremely low or high temperatures (below 0°C or above 45°C).

11. Safety Information

Battery Safety

  • Do not disassemble or modify the battery, insert foreign objects, expose it to high temperatures, or immerse it in water or other liquids. This may cause battery leakage, overheating, fire, or explosion.
  • Battery replacement should only be done by the manufacturer.
  • Do not drop, crush, or puncture the battery. Avoid subjecting the battery to large external pressure, which can lead to internal short circuits and overheating.

General Safety Precautions

  • Please read and retain this user manual carefully before using the product.
  • For charging, use a charger produced by a legitimate manufacturer and certified by the national safety authority. The power delivered by the charger must be between min 2 Watts and max 6 Watts.
  • Do not dismantle or modify the earbuds for any reason, as it may result in fire, electronic breakdown, or permanent damage to the product.
  • Do not expose the product indicator light near the eyes of children or animals.
  • Do not use the product during thunderstorms, as it may cause abnormal operation and increase the risk of electric shock.
  • Avoid prolonged use of the device at high volume, as it may cause hearing damage.

Official product video showcasing the QCY Crossky C30's design, comfort, and features in various daily scenarios.

12. Warranty & Support

After-Sales Service Commitment

QCY products adhere strictly to the after-sales service policies in accordance with the "Product Quality Law of the People's Republic of China" and "Law of the People's Republic of China on Protection of Consumer Rights and Interests."

  • Within 7 days of purchase: If the product experiences a quality issue confirmed by a QCY after-sales service center, you are entitled to repair, replacement, or return services.
  • Within 15 days of purchase: If the product experiences a quality issue confirmed by a QCY after-sales service center, you are entitled to repair or replacement services.
  • Within 12 months of purchase: If the product experiences a quality issue confirmed by a QCY after-sales service center, you are entitled to repair services.

Exclusions from Warranty

The manufacturer's warranty is void under the following circumstances:

  • Damage caused by natural disasters (e.g., earthquake, lightning, abnormal voltage) or environmental factors.
  • Disassembly, modification, or repair by unauthorized personnel.
  • Damage resulting from improper use, misuse, abuse, contamination, or other external causes.
  • Use of unspecified adapters or accessories.
  • Damage due to failure to follow instructions in the manual.

Contact Information

For after-sales service or support, please contact:

  • Phone: 4008-306-708
  • Website: www.qcy.com
  • Manufacturer: Dongguan Hele Electronics Co., Ltd.
  • Address: No. 325 Yuehui Rd, Daojiao Town, Dongguan City, Guangdong Province, China

A detailed user manual in PDF format is available for download from the seller's website or by scanning the QR code provided in the product packaging.

13. Regulatory Compliance

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Wireless Frequency: 2.402-2.480GHz
RF Power of Transmission: <4dBm

RoHS Compliance

This product complies with the RoHS directive. The table below indicates the presence of hazardous substances.

Part NameLead (Pb)Mercury (Hg)Cadmium (Cd)Hexavalent Chromium (Cr(VI))Polybrominated Biphenyls (PBB)Polybrominated Diphenyl Ethers (PBDE)
Outer CasingOOOOOO
Circuit Board ComponentsXOOOOO
BatteryOOOOOO
Charging CableOOOOOO
AccessoriesOOOOOO

O: Indicates that the hazardous substance in all homogeneous materials of this part is below the limit requirement specified in GB/T 26572.
X: Indicates that the hazardous substance in at least one homogeneous material of this part exceeds the limit requirement specified in GB/T 26572.

Environmental Protection Use Period

Under normal operating conditions, the environmental protection use period of this product is 10 years. During this period, the product will not leak any hazardous substances and can be recycled according to local regulations.

CE and RoHS compliance logos.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.